Manual de instrucciones de Edelbrock 29085

Resumen del contenido incluido en la página 1

Victor Jr. LS1 EFI Intake Manifold
for GM 5.7L LS1 & LS6 V8 Engines
Catalog #29085 & #28095
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your new Intake Manifold. If you have any questions or problems, do not
hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm PST, Mon-Fri, or via e-mail at:
Edelbrock@Edelbrock.com
CAUTION: Make sure the vehicle’s battery has been disconnected and that the vehicle is supported on a level surface to

Resumen del contenido incluido en la página 2

INSTALLATION PROCEDURE: 1. (Note: Manifold #29085 must use O-Ring type gaskets (GMP/N 12533587) when installing this intake manifold. Manifold #28095 uses a conventional style gasket, Fel-Pro #1312-3). Gasket sealer is not required when using OEM type gaskets. Using the supplied 6mm x 50mm hex head bolts and 1/4” AN washers, mount the manifold to the engine. The Gen III throttle bracket mounts under the two left side rear intake manifold bolts. Following the torque sequence in Figure 1, torque a