Manual de instrucciones de Edelbrock 5291

Resumen del contenido incluido en la página 1

EDELBROCK SUSPENSION
Sub-Frame Connectors
For 1994-2002 Mustang GT & 1999-2002 Mustang Cobra
PostScript Picture
(Edelbrock B/W Logo.eps)
Catalog #5291
INSTALLATION INSTRUCTION
Please study these instructions carefully before installing your new sub-frame connectors. If you have any
questions or problems, contact our Technical Hotline at: 1-800-416-8628 from 7 am - 5 pm, Monday through
Friday, Pacific Standard Time or e-mail us at: edelbrock@edelbrock.com.
Application: Designed for 1994-2002

Resumen del contenido incluido en la página 2

INSTALLATION INSTRUCTIONS 5. Weld all the floor pan pieces that are spot weld 1. Place vehicle on a drive-on style of lift at the factory and will be covered by the (preferred) or lift vehicle so as to keep the subframe connectors after installation. This will suspension loaded with the vehicle weight. help the subframe connectors and keep the Spring rates must be equal from the left side to factory spot welds from breaking where they the right side, and the weight of the vehicle must would be

Resumen del contenido incluido en la página 3

9. Paint the Edelbrock Subframe Connectors at this time to prevent corrosion. Re-install any wiring, brake lines, and or fuel lines and mount them securely. Now is a good time to inspect the condition of the suspension components, check for worn, loose, or broken components and replace accordingly. The Edelbrock Subframe Connectors will do the most for a vehicle with good suspension parts. 10. Re-install the interior pieces in the front foot Fig. 3 wells; install front seat mount hardware wit