Manual de instrucciones de Edelbrock 641530

Resumen del contenido incluido en la página 1

RUSSELL GM LS1 COMPLETE FUEL SYSTEM
Catalog #641530
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
KIT CONTENTS
❑ 1 Edelbrock Fuel Pump #1790 ❑ 20 ft. Russell -6 hose
❑ 1 Edelbrock Fuel Pressure Regulator Kit #1728 ❑ 10 Russell -6 cushion clamp

Resumen del contenido incluido en la página 2

BEFORE BEGINNING Someone who has a basic knowledge of automobile repair and modification and is familiar with and comfortable with working on their vehicle can accomplish the mechanical installation of this kit using common tools and procedures. However, this kit is designed to allow you to custom fit the fuel lines and components to your application, and will require that you cut hoses to fit and drill holes for fuel pressure regulator mounting, junction blocks, etc. If you do not feel comforta

Resumen del contenido incluido en la página 3

COMPLETE LS1 FUEL RAIL INSTALLATION Russell fuel rail install: 4. Install the vacuum hose from the regulator to the intake 1. Attach supplied brackets to the intake manifold using manifold. It might be possible to use your stock the supplied hardware. vacuum hose for the regulator depending on the placement of the fuel pressure regulator. Note: Install most of the necessary components onto the fuel 5. Roughly install the fuel pressure regulator onto the rail before installing in vehicle for ease

Resumen del contenido incluido en la página 4

Russell Profilter install: 3. Determine the hose paths and lengths required for the fuel hose leading from the fuel filter outlet to the inlet 1. Install two (2) -10 AN to -8 AN fittings into the Profilter. of the Y block. Build and install the hose assembly. Note the inlet and outlets of the fuel filter during the installation. 4. Determine the hose path and lengths required for the fuel hose leading from the outlets of the Y-block to the 2. Find a suitable location for the Profilter on the veh

Resumen del contenido incluido en la página 5

©2007 Edelbrock Corporation Catalog #641530 Page 5 of 5 Brochure No. 63-641530 Rev. 10/07 - AJ/mc

Resumen del contenido incluido en la página 6

Edelbrock Corporation, 2700 California St., Torrance, CA 90503 Tech Line: 800-416-8628 E-Mail: Edelbrock@Edelbrock.com ©2007 Edelbrock Corporation Catalog #641530 Brochure No. 63-641530 Rev. 10/07 - AJ/mc