Manual de instrucciones de Edelbrock 65642

Resumen del contenido incluido en la página 1

Edelbrock Header
For 1994-2003 Ram Pick-Up, 1997-2002 Dakota,
and 1998-2002 Durango
5.2L & 5.9L, 2 & 4 Wheel-Drive
Catalog #6564, #65640 & #65642
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Header. If you have any questions or problems, please
contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail
us at edelbrock@edelbrock.com. Please fill out and mail your warranty card.
HEADERS: Thes

Resumen del contenido incluido en la página 2

4. Re-attach factory Y-pipe using supplied donut 3. At this point, it is a good idea to look over the gaskets and hardware. complete installation to be sure nothing was 5. Using the supplied tie wraps, tie back any wire missed. packs or soft lines that may come close to exhaust. 4. Start vehicle and bring up to normal operating Be careful not to kink cable or lines. temperature and check for possible leaks, correct 6. Re-install 02 sensor into Y-pipe (use anti-seize on as necessary. threads). 5.