Manual de instrucciones de Edelbrock 70025

Resumen del contenido incluido en la página 1

Victor Jr. Plate Upgrade Kits
for Squareflange and Dominator Carburetors
Kit #70024 and #70025
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock Nitrous Kit. Failure to follow
instructions will void the warranty and may cause damage to parts and/or personal injury. If you have any questions or
problems, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at: Edel

Resumen del contenido incluido en la página 2

DISASSEMBLY NOTE: Be sure that the engine is cool, the fuel pressure has been relieved in the fuel system, and the battery has been disconnected. 1. Remove the carburetor. 2. Remove both lines from the plate to the solenoids. 3. Remove the nitrous and fuel jet from the inlet fittings to the plate. 4. Remove the Performer RPM Plate and gaskets from the carburetor pad of the intake manifold. Make sure that all of the gasket material is removed from the carburetor pad of the intake manifold and the

Resumen del contenido incluido en la página 3

13. Install the assembled Performer RPM Fuel Solenoid onto the remaining solenoid bracket using the remaining 2 solenoid mounting screws. Mount this solenoid and bracket as close to the Victor Jr. Nitrous Plate as possible on the opposite corner of the other Performer RPM Fuel Solenoid on the intake manifold. You may not want to solidly mount the bracket yet until you have installed the nitrous hoses from the solenoid tee to the plate fittings. 14. Using the jet chart below, select the appropria

Resumen del contenido incluido en la página 4

Edelbrock General Warranty It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable. Edelbrock warrants each new product, except Performer Series Carburetors, Race Division Parts, Tubular Exhaust Systems, RPM Series Mufflers, Cat-Back Systems and Performer IAS Shock Absorbers which are warranted separately, to be free from defects in both workmanship and material for a period of one (1) year from the date of purchase, provided that the pr