Manual de instrucciones de Edelbrock R09783

Resumen del contenido incluido en la página 1

Catalog #R09783
DOT Racer Front Brake Hose Kit
for 2006 Yamaha YZF-R6
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Brake Hose Kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or
e-mail us at Edelbrock@Edelbrock.com.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
resul

Resumen del contenido incluido en la página 2

7. Route hoses behind forks and pull out between front fairing and fender. Install supplied cushion clamp over both hoses so that mounting hole is to left and clamp/hoses are offset to front. Place horn bracket over hoses. Attach hoses to bracket by inserting factory junction block bolt through cushion clamp and supplied nylon spacer and threading into factory junction block mounting hole (See Fig. 4, shown installed on fork tree, top view). Leave bolt finger-tight. Re-install horn to bracket. 8