Manual de instrucciones de Harbor Freight Tools CENTRAL HYDRAULICS 36469

Resumen del contenido incluido en la página 1

Flat Bottom
Long Ram Hydraulic Jack
3 Ton 8 Ton
36468 36469
ASSEMBLY & OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight T

Resumen del contenido incluido en la página 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Specifications S8 KU 39 646 3646 Finish Baked enamel 3n Ton 8 To Weight Capacity 1 Maximum Height 44- / ” 2 Minimum Height 24” 1 Stroke 2- 0" 19 /

Resumen del contenido incluido en la página 3

9. Use eye and ear protection. Always wear ANSI approved impact safety goggles when installing or using this product. 10. Keep children away. Children must never be allowed in the work area. 11. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across the Jack during use. 12. Never leave the product unattended while supporting an object. 13. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine wo

Resumen del contenido incluido en la página 4

Note: Only use a pin that is intended for supporting this type of Jack, is capable of support- ing the maximum capacity listed above, and ensure that the pin is properly secured before use. Note: This Jack is not intended for horizontal use. 2. Insert the Handle (26) into the Handle Socket (27). Raising and Lowering 1. To raise the Hydraulic Jack turn the Release Spindle (18) clockwise until the valve is tightly closed. Pump the Handle (26) to raise the Jack. Continue to pump the Handle (26) u

Resumen del contenido incluido en la página 5

Unpacking When unpacking your Long Ram Hydraulic Flat Bottom Jack, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Parts List Note: Some parts are listed and shown for Pn art D. escriptio Qty illustration purposes only and are not 1kV1 alve Bloc available individually as replacement 2rC1 opper Washe parts. 3rC1 ylinde Note: When ordering, specify which model 4gO1 -Rin number the parts will be for. 5rO1