Manual de instrucciones de Harbor Freight Tools 90402

Resumen del contenido incluido en la página 1

HYDRAULIC DOOR CLOSER
90402
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Resumen del contenido incluido en la página 2

Specifications Overall Dimensions 7-1/2” L x 2-3/4” H x 2-5/8” W Arm Dimensions 9-3/4” L, Closed Mounting Holes 6-7/8” Width Apart (Centers), 15/16” H (Centers) Maximum Capacity 132 Lbs. (For small & medium doors) Door Closer Weight 3.4 Lbs. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the

Resumen del contenido incluido en la página 3

9. Maintain products with care. Keep products clean for better and safer performance. 10. Stay alert. Watch what you are doing, use common sense. Do not assemble the Door Closer when you are tired. 11. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condit

Resumen del contenido incluido en la página 4

Operation and Assembly This Closer is designed to be mounted on the door, on the pull side. Use the template O below for regular arm installations for doors opening to 180 . Arm 2-3/8” Arm Screw (#2) and Shoe (#4) Lock Washer (#3) 5-1/8” Frame 1-1/32” 3/4” Shaft attaches here Hydraulic Housing (#8) Door Holes for 6-7/8” Wood Screws (#7) or Machine Screws (#9) Refer to the Assembly Drawing on page 5. Note: Diagram above is showing right hand opening; left hand opening would layout in opposite

Resumen del contenido incluido en la página 5

Assembly Drawing 8 Attaches to door frame (See Template) 4 2 5 7 3 Attaches to Hydraulic 9 Housing (#8) at the 1 Arm Screw (#2) 6 Parts List Part No. Description 1 Cover Cap 2 Arm Screw 3 Lock Washer 4 Arm Shoe 5 Shaft 6 Washer 7 Wood Screw (6) 8 Hydraulic Housing 9 Machine Screw (4) PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU- TOR MAKES ANY REPRESE