Manual de instrucciones de Broilmaster BL48G-1

Manual de instrucciones del aparato Broilmaster BL48G-1

Aparato: Broilmaster BL48G-1
Categoría: Barbacoa de gas
Fabricante: Broilmaster
Tamaño: 1.85 MB
Fecha de añadido: 1/27/2014
Número de páginas: 24
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Broilmaster BL48G-1. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Broilmaster BL48G-1.

Para tu comodidad

Si ver los manuales de instrucción de Broilmaster BL48G-1 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Broilmaster BL48G-1 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Broilmaster BL48G-1 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Broilmaster BL48G-1 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Broilmaster BL48G-1, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Broilmaster BL48G-1. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

i T ns alla TiOn i T ns T ruc iOns
MODELS MODELS
PCB1-2 BL26P-1
DCB1-2 SS26P-1
MODELS
BL48G-1
SS48G-1
B101652
vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in
thiS CArton bEforE bEginning inStAllAtion.
CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES.
work glovES ArE rECommEndEd to prEvEnt injury.
Keep This Owner ’s Manual FOr FT u ure r eFerence .
EmpirE Comfort SyStEmS, inC • 918 frEEburg AvE. • bEllEvillE, il 62220
B101586-

Resumen del contenido incluido en la página 2

tAblE of ContEntS CongrAtulAtionS! You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual before as- ® sembling your Broilmaster Grill accessory. Important Information ..........................................................................................................4 PCB1-2, DCB1-2 Installation Instructions .......................................................................5-10 Cart Exploded View & Parts List .........

Resumen del contenido incluido en la página 3

thiS gAS ACCESSory iS dESignEd for outdoor uSE only IMPORTANT: This manual should be read thoroughly by the person installing the grill mounting and all persons who will use and maintain the grill mounting. The installer should be sure the manual is left in the possession of the user. The user should retain this manual for future reference when using or cleaning the grill mounting and to properly identify any repair parts that may be required. WARNING: Reference this manual for proper inst

Resumen del contenido incluido en la página 4

i MpOT r T an inFOM r a TiOn Grill Location gas Types ® Broilmaster Gas Grills are designed for outdoor use Never use liquid propane gas with a grill designed for ONLY. natural gas, or natural gas with a grill designed for liquid propane gas. The type of gas required for your grill is These mounting accessories are designed for use with defined on its product identification label. Questions ® Broilmaster gas grills and must not be used with any regarding different types of gases shoul

Resumen del contenido incluido en la página 5

pCb1-2, dCb1-2 i T ns alla TiOn i T ns rucTiOns vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES. work glovES ArE rECommEndEd to prEvEnt injury. rEmovE protECtivE CoAting And vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd bEforE bEginning ASSEmbly. toolS rEquirEd: phillipS SCrEw drivEr (An ElECtriC SC

Resumen del contenido incluido en la página 6

CArt ExplodEd viEw & pArtS liSt 4 11 6 12 13 10 3 5 2 1 7 9 8 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX DESCRIPTION NO. PCB1 DCB1 H3PK1 1 B101585 B101584 B101584 Front Panel 2 B101651 B101642 B10164

Resumen del contenido incluido en la página 7

CArt hArdwArE pACkAgE 10-24 KEPS NUT PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 1/4-20 WING NUT HEX HEAD BOLT 1/4-20 X 3/4 ½ SNAP BUSHING 1/4-20 HEX NUT 1/4 ID X 1/2 OD LOCK WASHER PHILLIPS TRUSS HEAD SCREW 1/4-20 X 1 1/4 PHILLIPS SCREW 10-24 X 1/2 1/4 ID X 5/8 OD FLAT WASHER Note: Hardware shown at actual size where possible. Description Qty Description Qty Supplied Supplied PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 8 10-24 KEPS NUT 6 HEX HEAD BOLT 1/4-20 X 3/4 4 1/4-20 WING NUT 1 1/4-20 HEX NUT 4

Resumen del contenido incluido en la página 8

CArt ASSEmbly 3. Align the holes on the front and side panel assemblies and Caution: Be careful when handling parts, as they may secure with six #10-24 x 1/2” Phillips screws and 10-24 Keps contain sharp edges. Work gloves are recommended to prevent Nuts provided (3 on each side). Do not tighten these screws injury. Remove protective plastic covering. until all are installed. Use black screws for black carts and stainless steel screws for stainless steel carts. See Figures 2 1. For St

Resumen del contenido incluido en la página 9

CArt ASSEmbly 5. Attach Rear Brace to the Left and Right Side Assemblies with two 1/4-20 x 3/4” Phillips Truss Head screws and 1/4-20 Hex nuts. See Figure 5. Important: Make sure the brace goes in the cutout of the support bracket. Figure 5 6. Insert bushing in the front panel on the right for P and H series and on the left for R and T series grills. Install rubber guard over cart cut out. See Figure 6. Figure 7 8. Attach the Heat Shield to the Left and Right side assemblies with two 1/4-

Resumen del contenido incluido en la página 10

CArt ASSEmbly 9. For Grill Heads other than R3 Series, continue on to Step 10. 10. Mount the tank retainer to the cart by using 1/4-20 x 1 1/4 Phil- lips Truss Head screw and 1/4-20 wing nut. For R3 Series Grill Heads: Press in the two sides of the Control Housing (provided with Grill Head) and fit it into the opening under the grill head as shown in Figure 10. Grill Assembly will look like Figure 11. Note: It may be easier to insert one side of the control housing first, and then p

Resumen del contenido incluido en la página 11

bl26p-1, SS26p-1 pAtio bASE i nsT alla TiOn i T ns T ruc iOns wArning: thiS pAtio bASE iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr'S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS ap TiO pOsT . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy

Resumen del contenido incluido en la página 12

pAtio bASE ExplodEd viEw & pArtS liSt 3.08 8 9 2.63 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX NO. DESCRIPTION SS26P BL26P 1 B101660 B101644 Post Assembly 2 B101760 B101760 Upper Bracket Assembly 3 B1

Resumen del contenido incluido en la página 13

pAtio bASE hArdwArE pACkAgE HEX HEAD SCREW 1/4-20 X 1 1/2 HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 1/2 OD LOCK WASHER 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 HEX HEAD SCREW 10 X ½ SELF DRILL Note: Hardware shown at actual size where possible. Description Quantity Notes Supplied HEX HEAD SCREW 1/4-20 X 1 1/2 4 1/4 ID X 1/2 OD LOCK WASHER 4 HEX HEAD SCREW 10 X 1/2 SELF DRILL 12 SS26P-1 Models Only HEX HEAD BOLT 1/4-20 X 3/4 4 1/4 ID X 5/8 OD FLAT WASHER 4 HEX HEAD SCREW 10 X 1/2 12 BL26P-1

Resumen del contenido incluido en la página 14

pAtio bASE inStAllAtion 2. Fasten the bottom of the post to the cast base using 1/4 x 1/2 NOTICE: Assemble post before assembling grill. Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2. Anchor the cast iron patio base to your patio using the two holes The SS26P and BL26P Patio Bases are only for use with Broilmaster provided in the base. (Hardware not included) Gas Grills. Before proceeding with installation read your Owner’s Note: Make sure that the large rectangular cut

Resumen del contenido incluido en la página 15

pAtio bASE inStAllAtion 5. For Grill Heads other than R3 Series, continue on to Step 6. 7. Position the grill head onto the post and fasten with ¼-20 x ¾ For R3 Series Grill Heads: Bend the tabs on the Post Cover Hex Head Screws and 1/4 x 5/8 Flat Washers. See Figure 7. Plate to 90° as shown in Figure 5. Two different size cover plates are included with the R3 Series Grill Heads. Choose the plate that will best fit your post. Note: If using the stainless steel Post Cover Plate, bend the

Resumen del contenido incluido en la página 16

pAtio bASE inStAllAtion 9. Install the post access door and grease cup as shown in Figures 9 and 10. Figure 9 STEP #1 STEP #2 STEP #4 STEP #3 NOTE: GAS LINE REMOVED FOR CLARITY Figure 10 10. Continue assembly as directed by the Owner’s Manual pack- aged with the grill head. Page 16 B101586-4-0112

Resumen del contenido incluido en la página 17

bl48g-1, SS48g-1 onE piECE in-ground poSt b101652 two piECE in-ground poSt i nsT alla TiOn i nsTrucTiOns wArning: thiS in-ground poSt iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr’S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS in-ground pOT s . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. C

Resumen del contenido incluido en la página 18

in-ground poSt ExplodEd viEw & pArtS liSt 3.08 6 8 5 9 Remove R p otective tingcoa fRom ainlessst steel R ap ts aR st ting ta pop Rivets and veRify ttha all aR p ts listed in the exploded view on this agep veha been included R befo e beginning this tionallainst . c T au O i n : u se caution when handling aR p ts , as they yma aincont shaRp edges . w R o k gloves R a e Recommended ot pRevent injuR y . INDEX NO. PART NUMBER DESCRIPTION SS48G B101652 BL48G 1 B101674 - B101672 Post Assembly 2 B101

Resumen del contenido incluido en la página 19

in-ground hArdwArE pACkAgE HEX HEAD SCREW 10 X 1/2 SELF DRILL HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 BLACK Note: Hardware shown at actual size where possible. Description Quantity Notes Supplied HEX HEAD SCREW 10 X 1/2 SELF DRILL 4 SS48G-1 Models Only HEX HEAD BOLT 1/4-20 X 3/4 4 1/4 ID X 5/8 OD FLAT WASHER 4 HEX HEAD SCREW 10 X 1/2 BLACK 4 BL48G-1 Models Only B101586-4-0112 Page 19

Resumen del contenido incluido en la página 20

in-ground poSt ASSEmbly The gas supply line should be trenched at least 10 inches NOTICE: Assemble and install patio base before assem- below the surface of the ground to prevent damage from dig- bling grill. ging. CAUTION: The gas supply line must be regulated (In the case of Natural gas that means connected after your The SS48G and BL48G In-Ground Posts are only for use with gas meter and regulator) and that you have an easily acces- Broilmaster Gas Grills. Before proceeding with installati


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Broilmaster B101652 Manual de instrucciones Barbacoa de gas 179
2 Broilmaster B100847-1-0109 Manual de instrucciones Barbacoa de gas 52
3 Broilmaster BHAX-1 Manual de instrucciones Barbacoa de gas 22
4 Broilmaster BL26P-1 Manual de instrucciones Barbacoa de gas 15
5 Broilmaster BBA-1 Manual de instrucciones Barbacoa de gas 47
6 Broilmaster BDA-1 Manual de instrucciones Barbacoa de gas 0
7 Broilmaster BPB26-1 Manual de instrucciones Barbacoa de gas 1
8 Broilmaster B101586-4-0112 Manual de instrucciones Barbacoa de gas 1
9 Broilmaster BP48-1 Manual de instrucciones Barbacoa de gas 0
10 Broilmaster BHA-1 Manual de instrucciones Barbacoa de gas 1
11 Broilmaster BRB-1 Manual de instrucciones Barbacoa de gas 2
12 Broilmaster B101652 Manual de instrucciones Barbacoa de gas 5
13 Broilmaster BBA-1 Manual de instrucciones Barbacoa de gas 4
14 Broilmaster BHAX-1 Manual de instrucciones Barbacoa de gas 2
15 Broilmaster BL26P-1 Manual de instrucciones Barbacoa de gas 1
16 12Volt Olympus Visera PEF-V Manual de instrucciones Barbacoa de gas 6
17 2JANE iPAQ Mobile Media Companion rz1715 Manual de instrucciones Barbacoa de gas 3
18 2JANE Tektronix Upgrade Kit Z340FX Manual de instrucciones Barbacoa de gas 1
19 2nd Ave. DVD-V7200 Manual de instrucciones Barbacoa de gas 0
20 2nd Ave. Canon imageRUNNER 0023W934 Manual de instrucciones Barbacoa de gas 1