Resumen del contenido incluido en la página 1
AirMap 500
Handheld Mapping GPS Receiver
Operation Instructions
Resumen del contenido incluido en la página 2
Copyright © 2003 Lowrance Electronics, Inc. All rights reserved. AirMap , Lowrance Avionics and Lowrance are all registered trademarks of Lowrance Electronics, Inc. Jeppesen is a registered trademark of Jeppesen Sanderson, Inc. Navionics is a registered trademark of Navionics, Inc. DURACELL is a registered trademark of Duracell, Inc. RAYOVAC is a registered trademark of Rayovac Corporation. Points of Interest Data in this unit are by infoUSA, copyright 2001-2003, All Rights Rese
Resumen del contenido incluido en la página 3
Table of Contents Section 1: Read Me First! ............................................................. 1 Capabilities and Specifications .................................................... 3 Introduction to GPS and WAAS................................................... 7 How to use this manual: typographical conventions .................. 9 Section 2: Installation & Accessories......................................... 11 Power.................................................................
Resumen del contenido incluido en la página 4
E6B Wind Speed/Direction Calculator................................... 43 Vertical Navigation Calculator .............................................. 44 Section 4: Land Operation.......................................................... 45 Keypad......................................................................................... 45 Power/lights on and off ............................................................... 46 Main Menu ..........................................................
Resumen del contenido incluido en la página 5
Alarm Clock............................................................................. 63 Sun/Moon Rise & Set Calculator............................................ 63 Trip Calculator........................................................................ 64 Trip Down Timer..................................................................... 64 Trip UP Timer......................................................................... 64 Waypoints....................................................
Resumen del contenido incluido en la página 6
Flash Trails on Screen Option................................................ 91 Update Trail Option................................................................ 91 Update Trail Criteria (Auto, Time, Distance) ....................... 91 Trail Update Rate (Time, Distance)....................................... 92 New Trail................................................................................. 92 Units of Measure.........................................................................
Resumen del contenido incluido en la página 7
Section 1: Read Me First! How this manual can get you flying, fast! Welcome to the exciting world of GPS! We know you're anxious to take off and begin navigating, but we have a favor to ask. Before you grab the batteries and head for the plane, please give us a moment or two to show you how to skip around our manual for the information you need. (Tips start on page 2.) We want to help you get the best performance from this versatile little GPS unit — in the air, on the ground and on the sea! B
Resumen del contenido incluido en la página 8
Whether your AirMap 500 is the only GPS in the cockpit or backing up an in-panel display, you're using the most versatile and most affordable hand-held GPS receiver in the aviation market today. Our goal for this book is to get you in the air (or out on the road) fast, with a minimum of fuss. Like you, we'd rather spend more time flying, and less time reading the manual! So, we designed our book so that you don't have to read the whole thing from front to back for the information you want. At th
Resumen del contenido incluido en la página 9
Section Four, Land Mode Operation, which also includes its own one- page quick reference. After we introduce the Land Mode menus and submenus, the rest of the section contains AirMap's more advanced command functions. Your AirMap is ready to use right out of the box, but you can fine tune and customize its operation with dozens of options. We describe how to use them in Section 5, System Setup and GPS Setup Options. This sec- tion covers both Aviation Mode and Land Mode options. Finally, in Sect
Resumen del contenido incluido en la página 10
Recording:......................... Removable MMC or SD memory cards for recording GPS trip details, displaying cus- tom maps, upgrading operating system soft- ware and transferring trip data to personal computer without a slow serial connection. USB card reader included with unit. MMC slots:........................ One, inside battery compartment. Accepts non-proprietary MMC or SD memory cards. Aeronautical map:............ Jeppesen Americas database with airports, VORs, NDBs, intersections a
Resumen del contenido incluido en la página 11
Man Overboard: ............... MOB feature precisely marks man overboard location with special icon, then automatically displays navigation data to that position. (Land Mode only.) Com Port:.......................... One serial communications port, NMEA 0183 version 2.0 compatible. Allows exchange of position data with another device, such as an autopilot or personal computer. Optional combination serial/power cable available. Zoom range: ...................... 39 ranges; 0.02 to 4,000 miles. NO
Resumen del contenido incluido en la página 12
what's in the map, see the preceding segment on specifications.) We lock it in here at the factory — you can't change or erase this map. The background map, along with the Jeppesen and Lowrance aeronautical databases, are all you need for aerial navigation. (Your unit reads these databases automatically from the MMC card included in the package.) The background map is also suitable for many land and marine naviga- tion chores, but for maximum surface accuracy and much more detail, you need a cus
Resumen del contenido incluido en la página 13
You make your own Custom Map Files with our MapCreate software, but you don't have to. We also sell ready-to-use FreedomMaps. These custom maps are pre-loaded on MMCs. (No computer work required!). Introduction to GPS and WAAS Well, now you know the basics of how AirMap does its work. You might be ready to jump ahead to Section 2, Installation & Accessories, on page 11, so you can install the batteries. Or you might want to see how our text formatting makes the manual tutorials easy to skim. If
Resumen del contenido incluido en la página 14
A minimum of three satellites are required to determine a 2D fix. The system requires signal reception from three satellites in order to determine a position. This is called a 2D fix. It takes four satellites to determine both position and elevation (your height above sea level — also called altitude). This is called a 3D fix. Remember, the unit must have a clear view of the satellites in order to receive their signals. Unlike radio or television signals, GPS works at very high frequencies. Thes
Resumen del contenido incluido en la página 15
WAAS signals make your GPS navigation even more accurate. Your AirMap automatically receives both GPS and WAAS signals. However, WAAS has some limits you should know about. First, the U.S. government has not completed construction of the WAAS system, so it is not yet fully operational. The ground stations are in place, but only a few of the needed WAAS satellites have been launched. WAAS can boost the accuracy of land and marine GPS navigation, but the system is designed for aircraft. The satell
Resumen del contenido incluido en la página 16
Keyboard The other keys perform a variety of functions. When the text refers to a key to press, the key is shown in bold, sans serif type. For example, the "Enter/Save" key is shown as ENT and the "Menu" key is shown as MENU. Menu Commands A menu command or a menu option will appear in small capital letters, in a bold sans serif type like this: SYSTEM SETUP. These indicate that you are to select this command or option from a menu or take an action of some kind with the menu item. Text that you m
Resumen del contenido incluido en la página 17
Section 2: Installation & Accessories Power The AirMap operates from AA batteries or on 3 volts DC using an op- tional external power cable with a cigarette lighter adapter. If the power cable is used, the AirMap automatically switches to it if the ex- ternal power is greater than the battery voltage. If the external power fails, the unit automatically switches to the batteries. NOTE: Some pilots like to keep fresh batteries in their units, even when us- ing the external power. If the power fail
Resumen del contenido incluido en la página 18
Do not mix different battery types. Mixing battery types may cause leak- age. (For example, don’t use both alkaline and NiMH batteries at the same time, and don't use standard alkalines with rechargeable alkalines.) Battery Installation Turn the unit over so that the back is facing you. Place your thumb on the large arrowhead on the battery compartment cover. Press in and down, toward the bottom of the unit (in the direction indicated by the arrow). The battery cover will snap off. Remove AirMap
Resumen del contenido incluido en la página 19
Cigarette Lighter Power Adapter To use external DC power: Plug the power cable's cigarette lighter adapter into a cigarette lighter receptacle. Next, slide the other connec- tor over the power contacts on the bottom of the AirMap case. Attach external power cable to AirMap. MMC or SDC Memory Card Installation Your AirMap uses a MultiMedia Card to store information, such as cus- tom maps, waypoints and other GPS data. The unit can also use Secure Digital Cards (SD card or SDC) to store informatio
Resumen del contenido incluido en la página 20
3. Hold unit upright in left hand. Use a thumbnail or fingernail to grab the groove in the bottom of the MMC. 4. Drag the MMC from the slot into the battery compartment. 5. Hold AirMap face up and give it a shake to dump the MMC into your hand or onto a work surface. To add an MMC or SDC 1. Remove battery compartment cover. 2. Remove batteries, if present. 3. Hold unit upside down in left hand. Grasp the bottom corner of the MMC with your other hand. The MMC label should be toward you. 4. Use th
