Resumen del contenido incluido en la página 1
ALL METAL MOTION SENSOR
QUARTZ LIGHT CONTROL
Model HD-9260
© 2000 DESA International 598-1007-02
Resumen del contenido incluido en la página 2
Contents Introduction ..................................................................................................3 Package Contents .....................................................................................4 Installation .....................................................................................................5 Wall Mount ...............................................................................................5 Eave Mount .......................................
Resumen del contenido incluido en la página 3
Introduction Dear Consumer: ® ® We would like to thank you for purchasing this JourneyMan product. We at Heath /Zenith feel ® that you have purchased the most durable motion sensor available today. This JourneyMan product will give you a lifetime worth of operation. We are so confident with the durability of this product that we are backing it with a Lifetime Warranty. ® Heath /Zenith Enhanced Performance Features Rugged gripping teeth and finger screw provide full three-dimension adjustment o
Resumen del contenido incluido en la página 4
Package Contents Additional Items Needed • Motion Sensor Light Fixture • Phillips screwdriver • Ladder • Lens shield • Two 250 watt halogen lamps • Manual Fits All Junction Box Configurations • Hardware Pack 1 Gasket Circular 1 Hanger Horizontal rectangular 1 Universal adaptor plate Vertical rectangular 4 Wire nuts 2 #6-32 X 3/4" (19 mm) screws (for small rectangular boxes) Octagon 2 #8-32 X 3/8" (10 mm) screws (fixture to universal adaptor) 4 #8-32 X 3/4" (19 mm) screws (for circular or octagon
Resumen del contenido incluido en la página 5
Installation CAUTION: BEFORE STARTING THE INSTALLATION, TURN THE POWER OFF AT THE CIRCUIT BREAKER. If you want to use the Manual Override feature you will need to install the fixture on a circuit controlled by a switch. The lamps are packed in boxes, inside the lampheads. Open the lampheads by removing the screws at the top. Use a clean cloth or the foam packing around the lamps to keep your fingers off the lamps. Install the lamps in the right side of the sockets first, then the left. Close the
Resumen del contenido incluido en la página 6
Universal Adaptor Standard Wiring ® If you are mounting the JourneyMan fixture to a CAUTION: If you have not already turned the power off at the breaker or fuse, do so now. small rectangular box, you will need to use the universal adaptor as shown below. Other boxes Make sure the gasket is in place before connect- ing any wires. You may find it convenient to use may require the adaptor adjusted differently. the wire hanger provided to hold the fixture to the If you are using a standard octagon o
Resumen del contenido incluido en la página 7
Controlling Non-Motion Sensing Fixtures ❒ When wiring to additional standard fixture ❒ This fixture is provided with a sensor rated for 1000W. Since the fixture is only rated 500W, only: Strip the motion sensor's red wire and connect to the standard fixture's black wire. 500W of additional load may be controlled by this sensor. Connect all white wires together. Total fixture ratings must not exceed 1000W (8.3 A). ❒ When determining what a fixture is rated for, NOTE: All wiring between fixtures s
Resumen del contenido incluido en la página 8
Finish Mounting Specifications ® ❒ Align the JourneyMan base plate, gasket, and Range .............................. Up to 100 feet (30.5 m) with the junction box holes. Secure with mounting Range Boost On; up to 70 screws that fit your junction box. feet (21 m) with Range ❒ If not installed on a weatherproof box or if the Boost Off. (Varies with sur- adaptor plate was used, caulk between the rounding temperature). base plate and mounting surface with sili- Sensing Angle ................. Up to
Resumen del contenido incluido en la página 9
Test and Adjustment NOTES: When first turned on or when switching Range Boost 1 OFF ON from Manual to Auto mode wait 1 /2 minutes for the unit to calibrate. SENSITIVITY Testing with Range Boost on during day- light may result in abnormal operation. ON TIME ❒ Turn on the circuit breaker and light switch. MIN. MAX. ❒ Open the control access cover (on bottom of unit) TEST 1 5 20 by pulling down on the tab of the rubber cover. Sensor Bottom ❒ Turn the sensitivity control to the center of
Resumen del contenido incluido en la página 10
Adjustments Continued . . . ❒ Loosen the wing screws, estimate the direction to aim the sensor and tighten the wing screws just enough to hold the sensor in place. ❒ Walk through the coverage area noting where you are when the lights turn on. Loosen the wing screws and readjust the sensor as necessary. Tighten the wing screws (finger tight) when you are satisfied with the coverage direction. Keep the sensor at least 1 inch (25 mm) from lamps and keep the controls on the bottom. ❒ Adjust SENSITIV
Resumen del contenido incluido en la página 11
If the wide angle (270°) coverage is too wide for Maximum your application, you may need to install the lens Coverage Angle shield to reduce the coverage angle. Approx. area 270° ❒ Decide which side of the lens you want to cover. blocked by the lens shield (if ❒ Curve the shield as shown. Slide the shield used) down, under the two metal ribs of the case. Make sure the shield slides all the way down so the entire shield will lay directly against the lens. ❒ Slip the small protrusion behind the ve
Resumen del contenido incluido en la página 12
Operation MANUAL MODE Mode: On-Time: Works: Day Night Manual Mode only works at Test 5 Sec x x night because daylight returns Auto 1, 5 or 20 min. x the sensor to AUTO. Manual Until Dawn* x Flip the light switch off for one * resets to Auto Mode at dawn. second then back on to toggle 1 Second OFF then... RANGE BOOST between AUTO and MANUAL MODE. Off On Turn Range Boost on for addi- Manual Mode works with the Range Boost tional coverage only if needed. ON-TIME switch in the 1, 5, or 20
Resumen del contenido incluido en la página 13
Troubleshooting Guide If you have a problem, please follow this guide. You may also want to visit our Web site at: www.desatech.com. For more help call 1-800-858-8501 8:00 AM to 4:30 PM Central Time weekdays. Lo sentimos, pero no podemos contestar preguntas en español por teléfono. SYMPTOM POSSIBLE CAUSE SYMPTOM POSSIBLE CAUSE 1. Light switch is turned off. Lights stay on 1. A lamp is positioned too close to the Lights will 2. Flood light is loose or burned out. continuously. sensor or pointed
Resumen del contenido incluido en la página 14
® JourneyMan Lifetime Warranty This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state to state or province to province. ® For as long as you (the original purchaser) own this JourneyMan product, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Light bulbs are not covered. To obtain a refund or a replacement, return the product to the place of purchase. Not Covered - Repair ser
Resumen del contenido incluido en la página 15
CONTROL CON LUZ DE CUARZO Y DETECTOR DE MOVIMIENTO TODO DE METAL Modelo HD-9260 598-1007-02 © 2000 DESA International 598-1007-02 S -15-
Resumen del contenido incluido en la página 16
Indice Introducción ............................................................................................... 17 Contenidos del Paquete ........................................................................ 18 Instalación ...................................................................................................19 Montaje en pared .................................................................................. 19 Montaje en alero ................................................
Resumen del contenido incluido en la página 17
Introducción Querido consumidor: ® Deseamos agradecerle por haber comprado este producto JourneyMan . Quienes trabajamos para la ® Heath / Zenith creemos que ha comprado el detector de movimiento más durable que existe actualmente. ® Este producto JourneyMan le ofrecerá un funcionamiento de por vida. Tenemos tanta confianza en la durabilidad de este producto que lo respaldamos con una garantía de por vida. ® Heath / Zenith Características Mejoradas de Rendimiento Los dientes fuertes de su
Resumen del contenido incluido en la página 18
Contenidos del Paquete Artículos adicionales que se necesitan • Aparato de luz y detector de movimiento • Destornillador Phillips • Protección de la placa translúcida • Escalera Queda bien con todas las configuraciones de cajas de empalmes • Dos lámparas halógenas de 250 vatios • Manual • Paquete de ferretería 1 empaquetadura Circular Rectangular horizontal 1 gancho 1 placa adaptadora universal Rectangular vertical 4 conectores de cable 2 tornillos #6-32 x 19 mm. (para cajas pequeñas rectangular
Resumen del contenido incluido en la página 19
Instalación CUIDADO: ANTES DE COMENZAR LA INSTALACION , APAGUE LA CORRIENTE EN EL CORTACIRCUITOS. Si usted desea usar el sobrecontrol manual usted deberá instalar el aparato en un circuito controlado por un interruptor. Las lámparas están embaladas en cartones, dentro de los cabezales de lámpara. Abra los cabezales de lámpara quitando los tornillos de arriba. Use una tela limpia o la espuma de embalaje que está alrededor de las lámparas para que sus dedos no toquen las lámparas. Instale las lámp
Resumen del contenido incluido en la página 20
Adaptador Universal Cableado Estándar ® Si monta el JourneyMan sobre una caja pequeña CUIDADO: Si todavía no ha desconectado la rectangular, usted deberá usar el adaptador univer- alimentación en el cortacircuito o fusible, sal, como se muestra abajo. Otras cajas necesitarán hágalo ahora. que el adaptador se ajuste de forma diferente. Asegúrese que la empaquetadura esté en su sitio Si usa una caja estándar octagonal, probablemente antes de conectar cualquier cable. Le puede ser no necesitará el
