Manual de instrucciones de RBH Sound CA-200

Resumen del contenido incluido en la página 1

CA-200
Subwoofer A mplifier
O w n e r s M a n u a l

Resumen del contenido incluido en la página 2

Resumen del contenido incluido en la página 3

Introduction Congratulations on your purchase of an RBH Sound Amplifier! Your amplifier is the result of many years of research and development dedicated to producing powerful, accurate bass in home audio systems. This manual contains operating procedures and specifications. We recommend you thoroughly read through the material contained in this manual before connecting your amplifier. This will ensure you have an understanding of how to setup and operate your amplifier for optimum performa

Resumen del contenido incluido en la página 4

Amplifier Controls and Setup (continued) IMPORTANT NOTICE REGARDING BASS MANAGEMENT: It is important the signal being sent to the amplifier be a non-boosted or “flat” signal. To be sure of this, check the settings on your receiver or processor to make sure any “bass boost”, “super bass” or “loudness” is set to Off. In most cases for home theater, setting a receiver or processor will determine the crossover frequency through bass management settings. In this configuration, connect the receiv

Resumen del contenido incluido en la página 5

Amplifier Controls and Setup (continued) 9. High/Speaker Level Input: These binding post terminal connections are for the amplifier/ speaker level input from an amplifier or receiver. IMPORTANT! Use either the Line Input or the High Level Input. DO NOT use them both simultaneously. 10. High Level/Speaker Output: This is a 100 Hz high-passed output for your satellite/main speakers. The crossover limits the low frequencies (below 100 Hz) from going to your satellite/ main speakers. This cros

Resumen del contenido incluido en la página 6

Troubleshooting Situation: Probable Cause: Solution: No sound from Amplifier is not connected to constant Make certain the amplifier is subwoofer. power outlet. plugged into an unswitched AC power outlet. Amplifier is not receiving an audio Make certain there is an audio sig- signal from receiver or processor. nal from receiver or processor. Amplifier fuse might be blown. Replace fuse (if fuse is not readily accessible, consult your authorized RBH Sound dealer). Performance The +

Resumen del contenido incluido en la página 7

Resumen del contenido incluido en la página 8

Warranty Your RBH Sound subwoofer amplifier is covered by a limited warranty against defects in materials and workmanship for a period of 1 (one) year from the original date of purchase. This warranty is provided by the authorized RBH Sound dealer where the amplifier was purchased. Warranty repair will be performed only when your purchase receipt is presented as proof of ownership and date of purchase. Defective parts will be repaired or replaced without charge by your dealer’s store or the