Resumen del contenido incluido en la página 1
USER INSTRUCTIONS
VP100
Reference
HIGH END PREAMPLIFIER
VENTURE bvba
Hanendreef 23 – 2930 Brasschaat – Belgium
Tel : +32-36530732 Fax : +32-36531349
Email : info@ventureaudio.com Website : www.venture-audio.com
Resumen del contenido incluido en la página 2
WARNING: POTENTIAL SHOCK HAZARD! This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance This symbol is intended to alert the user of the presence of non insulated “dangerous voltage” within the product‘s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
Resumen del contenido incluido en la página 3
INDEX I. FOREWORD............................................................................................................................. 4 1. CONGRATULATIONS!......................................................................................................................... 4 2. VENTURE AUDIO ................................................................................................................................4 3. VP100 REFERENCE.....................................
Resumen del contenido incluido en la página 4
I. FOREWORD 1. CONGRATULATIONS! You just have purchased the VP100 Reference preamplifier. VENTURE AUDIO first wants to thank you for your trust. The best components were selected for its realization, as an extreme care was provided during its manufacturing. These attentions will permit to reach true musical quality heights. VP100 Reference is the result of many years of studies and research, of much experimentation, and of many careful listening sessions. Used in conjunction wi
Resumen del contenido incluido en la página 5
3. VP100 REFERENCE VENTURE AUDIO continues its research and now proposes its brand new amplifier, VP100 Reference. Its commuted resistors design and its fully Single-End discrete buffer allow obtaining a really more natural restitution, through a transparence and dynamic never reached at present times. Its multiple power-supplies are fully independent and are set in an external cabinet, for a better magnetic isolation. All these enhancements participate in VP100 Reference deep analysis,
Resumen del contenido incluido en la página 6
III. OVERVIEW 1. UNPACKING Your package contains: A VP100 Reference preamplifier. A Rc5 remote control, delivered with two Lr03 batteries (type AAA). An external power-supply unit A 12-pins power cord to plug between the preamplifier and the power-supply unit A mains power cord This user manual. 2. POSITIONING Your VP100 Reference preamplifier must be installed in a place far from about 10cm from the other appliances. This will guarantee the best signal-to-noise ratio. I
Resumen del contenido incluido en la página 7
IV. DESCRIPTION OF APPLIANCE ELEMENTS 1. FRONT PANEL (1) (2) (3) (4) Selection and Set-Down (end of set-up) knob. Preamplifier offset security LED (default off) Digital display Volume and Set-Up (begin of set-up) knob. Page 7 / 22
Resumen del contenido incluido en la página 8
2. REAR PANEL (21) (22) (23) (24) (25) (26) (10) (9) (8) (7) (6) (5) (4) (3) (2) (1) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) RIGHT CHANNEL LEFT CHANNEL (1) RCA Right output (11) RCA Left output (2) XLR Right output (12) XLR Left output (3) RCA 1 Right Input (13) RCA 1 Left Input (4) XLR 2 Right Input (14) XLR 2 Left Input (5) RCA 3 Right Input (15) RCA 3 Left Input (6) XLR 4 Right Input (16) XLR 4 Left Input (7) RCA 5 Right Input (17) RCA 5 Left Input (8) XLR
Resumen del contenido incluido en la página 9
3. REMOTE CONTROL Infrared LED emitter (1) (5) (2) (6) (3) (7) (4) (8) (1) Switch on/off the digital display. (2) Mutes the sound, or back to previous volume. (3) Selects inputs (-). (4) Lowers sound volume (-). (5) Sets the amplifiers in Stand-By mode (6) Wakes the amplifiers up (Stand-by off) (7) Selects inputs (+). (8) Rises sound volume (+). Page 9 / 22
Resumen del contenido incluido en la página 10
4. POWER SUPPLY UNIT (1) (5) (4) (7) (3) (6) (2) (1) 10-Pins Power-supply plug to connect to the VP100 preamplifier (2) On/Off switch (3) ON position. (4) OFF position. (5) Mains plug inlet. (6) 500mA mains fuse (7) Mains phase input pin. Page 10 / 22
Resumen del contenido incluido en la página 11
V. OPERATION INSTRUCTIONS 1. POWER SWITCH After having connected the different inputs to the corresponding appliances (CD player, tape, tuner...) and the outputs to the dedicated appliances (amplifiers, crossovers…), the VP100 Reference preamplifier can be switched on using the power switch located on the rear panel. It is advised not to switch off the VP100 Reference, to fully and instantly benefit from its maximum musical quality. However, if you are meant to keep away for a long ti
Resumen del contenido incluido en la página 12
3. PHONO SECTION (RIAA MM/MC) The VP100 has an adaptive (active) input load. There is no need for users to adjust the resistance input according to the cell they use (as they used to do thanks to MC input resistors matrix). Just plug your turntable to the right RCA (be it MM or MC depending on your appliance) and enjoy the music. This is safe, this is easy, and this will sound perfectly to the taste of your cell. For the MM input, there is set of 4 capacitors within the preamplifier,
Resumen del contenido incluido en la página 13
4. OPERATIONS Stand-By mode is accessible from the remote control. It allows reducing dramatically the energy consumption of the appliance. Once awoken (disabling the stand-by mode), the preamplifier will provide its optimum musical quality after only 15 minutes, whereas the first operation will require more than 4 hours of warm-up (as will require any main switch-on) to reach this same level. VP100 Reference offers 10 inputs (4 unbalanced “RCA”, and 4 balanced “XLR”, 1 Phono MM, 1 Ph
Resumen del contenido incluido en la página 14
5. DISPLAYS DESCRIPTIONS Standard display at start-up After start-up, the display shows the volume (attenuation level) of -66dB, and the first input is activated (RCA) The volume can be modified through remote control or the dedicated front knob, from –65dB (low volume) to 0dB (loud). By using the remote control or selection knob, the different inputs can be selected: RCA1, XLR2, RCA3, XLR4, RCA5, XLR6, RCA7, XLR8, MM and MC. th MM input is selected as the 9 input of the preampl
Resumen del contenido incluido en la página 15
By turning left the Volume knob, the phase is decreased by steps of 10° down to -180° (minimum). Last in the set-up program, we can teach the preamplifier some new remote control codes. This functionality is only to be used when using a new remote control. This option is defaulted to OFF (disabled). Turn the volume knob right to enable it. Turning left sets it back to OFF. To use this functionality, select ON then exit the set-up. The LEARN RC5 screen displays LEARN RC5 ERROR. Now
Resumen del contenido incluido en la página 16
6. SECURITY VENTURE AUDIO appliances are designed to operate in a perfect reliable and durable condition. This operation can however be influenced by external events. Some of them will require the action of the inner VP100 Reference security system. This security system aims at protecting the appliance from any over-voltage, for instance, as they also act to protect the whole Hi-Fi elements under the preamplifier « responsibility ». Speakers for instance are this way protected from DC of
Resumen del contenido incluido en la página 17
7. CLEANING VP100 Reference preamplifier was designed to operate perfectly with no specific setting or maintenance for a large number of years. In case of dust removal, plainly process using a clean dry rag. In case of a dirty mark, DO NOT uses any detergent or solvent, but uses a clean wet rag. Caution: NEVER clean any appliance while in operation. Page 17 / 22
Resumen del contenido incluido en la página 18
VI. SPECIFICATIONS Main section: Type: Preamplifier Volume: -66dB to 0dB Unbalanced Gain: 0dB Balanced Gain: 6dB Harmonics Distorsion: <0.01% / 600 Ohms / 2Volts Noise: <2.8µV (Typ.1,9µV) Signal-to-Noise ratio: > 120dB Offset: <0.1mV Max input level: 4.5Veff / 600 Ohms Inputs: 4 XLR inputs 4 RCA inputs + 2 Phono RCA (MM/MC) Output 1: XLR Max level: 9Veff / 600 Ohms Output 2: RCA Max level: 4.5Veff / 600 Ohms Inter-cards balance: +/- 9dB ; 2 channels Dim
Resumen del contenido incluido en la página 19
VII. WARRANTY 1. DURATION VENTURE AUDIO products are warranted to be free of defects if used under normal conditions for a period of two (2) years from the date of purchase. 2. CONDITIONS This warranty is subject to the following conditions and limitations. The warranty is void and inapplicable if the product has been used or handled other than in accordance with the instructions in the owner’s manual, abused or misused, damaged by accident or neglect or in being transported, or if the d
Resumen del contenido incluido en la página 20
VIII. QUESTIONS AND ANSWERS What difference is there between VENTURE and standard stand-by mode? VENTURE stand-by mode does not switch off fully the appliance. Only the power stages are shut-off. They are the main current consumers. The heart of the amplifier stays warm and operational. This allows getting the full musical quality back in about 10 to 15 minutes after waking the appliance back up. A standard switch-on of the appliance requires about 8 hours getting that same level back.
