Resumen del contenido incluido en la página 1
18V CORDLESS COMBO PACK
Model 90374
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements,
actual product may differ slightly from the product described herein.
Distributed exclusively by
®
Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
© ®
Copyright 2003 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the
Resumen del contenido incluido en la página 2
PRODUCT SPECIFICATIONS In tem Descriptio Batter Charger Input: 120 VAC / 60 Hz Electrical Requirements Battery Output: 18 VDC Bs attery Charging Time 3 to 5 Hour 3/8" Keyless / Reversible / Single Speed / 900 RPM Drill Specifications Squeeze Trigger / Torque Adjustments: 1 - 8 Oscillating Sander Triangle Shape / Hook & Loop Attachment Specifications 6,000 OPM / Rocker Power Switch Pistol Grip / 0 - 90 Degree Swivel Head / Slider Power Switch Flashlight Specifications Stepped Lens (Clear) / 8 Wat
Resumen del contenido incluido en la página 3
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified ele
Resumen del contenido incluido en la página 4
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 12. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on. A
Resumen del contenido incluido en la página 5
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 24. Tool service must be performed only by qualified repair personnel.
Resumen del contenido incluido en la página 6
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.) 2. Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) FIGURE B EXTENSIO
Resumen del contenido incluido en la página 7
5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before
Resumen del contenido incluido en la página 8
SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current V ~ Amperes A No Load Revolutions no xxxx/min. per Minute (RPM) SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Combo Pack in areas near flammable chemicals, dusts, and vapors. 2. Maint
Resumen del contenido incluido en la página 9
7. Use eye protection. Always wear ANSI approved safety impact eye goggles when working with these products. 8. Proper Battery Care: Battery (1A) leakage may occur under extreme usage or temperature conditions. If Battery fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes in contact with eyes, flush with water for several minutes and contact a doctor immediately. Never burn the Battery, as it can explode in a fire. Do not at
Resumen del contenido incluido en la página 10
18. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this ty
Resumen del contenido incluido en la página 11
4. To charge the Battery (1A), plug the Battery Charger’s Plug (1B) into the Charging Base (1C). Plug the Battery (1A) into the Charging Base (1C). Charging room temperature: 50° F - 104° F. Then, plug the Battery Charger into the nearest 120 Volt, grounded, electrical outlet. (See Figure D). 5. A Charging Indicator Light on the Charging Base (1C) will illuminate to show that charging is taking place. NOTE: The Battery Charger (1B) will not automatically turn off when the Battery is fu
Resumen del contenido incluido en la página 12
3. To turn off the Flashlight, slide the Switch Button (4C) to its OFF position. (See Figure E.) 4. To change the Bulb (7C), unscrew the Light Head Cap (9C) and remove the Lens (8C). Remove the old Bulb by pushing in on the Bulb while turning it clockwise. Insert a new Bulb by aligning the tabs on the Bulb with the slots in the Bulb socket. Push in on the new Bulb while turning it counterclockwise. Re-attach the Lens and Light Head Cap. (See Figure E.) BATTERY (1A) LIGHT LENS HEAD (8C) CAP (
Resumen del contenido incluido en la página 13
7. Lightly apply the oscillating Sand Paper Pad (17D) to the workpiece surface, and begin sanding the workpiece by moving the tool forward and backward with (parallel to) the grain of the workpiece. 8. Once the sanding job is completed, release pressure on the Switch (3D) to turn off the Sander. (See Figure F.) 9. IMPORTANT: If, during the sanding process it becomes necessary to replace worn sand paper with new sand paper, make sure to turn off the Sander and disonnect the Battery (1A). Re-in
Resumen del contenido incluido en la página 14
5. Whenever possible, secure the workpiece that is to be cut in a vise or with clamps. 6. Insert the fully charged Battery (1A) in the Jigsaw’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure G.) 7. The Jigsaw is equipped with a Safety Button that prevents accidental starting. To turn on the Jigsaw, depress the Safety Button and then squeeze the Switch (5E). NOTE: Always grip the Jigsaw firmly with both hands when the tool is running. (See Figure G.)
Resumen del contenido incluido en la página 15
To Operate The Drill: 1. WARNING! Always make sure the Trigger (3F) of the Cordless Drill is in its “OFF” position, the Battery (1A) is removed from the Drill, and the Battery Charger (1B) is unplugged from its electrical outlet prior to making any adjustments to the tool. (See Figure H.) 2. The Chuck (12F): Accepts up to 3/8” diameter drill bits (not included) and the Screwdriver Bit (31F). To install a drill bit, hold the Chuck Sleeve firmly in place and turn the Chuck (12F) counter
Resumen del contenido incluido en la página 16
6. Whenever possible, secure the workpiece that is to be drilled in a vise or with clamps. 7. When installing drill bits or the Screwdriver Bit (31F), make sure the Battery (1A) is removed from the Drill to avoid accidental starting. Then, insert and lock inplace a drill bit or Screwdriver Bit in the Chuck (12F) of the Drill. (See Figure H.) 8. Insert the fully charged Battery (1A) in the Drill’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure H.) 9.
Resumen del contenido incluido en la página 17
2. BEFORE EACH USE, inspect the general condition of the tools. Check for misalignment or binding of moving parts, cracked or broken parts, damaged wiring, and any other condition that may affect their safe operation. If abnormal noise or vibration occurs with a tool, have the problem corrected before further use. Do not use damaged equipment. 3. TO CLEAN, use a clean, damp, cloth to clean the outer surfaces of the Combo Pack tools and accessories. A mild detergent may be used. Do not use s
Resumen del contenido incluido en la página 18
PARTS LIST - FLASHLIGHT Pn art #D# escriptioPn art Descriptio 1y ABC atter 6g Locate Sprin 1r BBC attery Charge 7b Bul 1e CCC harger Bas 8s Len 2e CRC ight Enclosur9p Light Head Ca 3h CSC witc 1e 0 Left Enclosur 4n CSC witch Butto 1w 1 Scre 5r C Light Head Cove ASSEMBLY DIAGRAM - FLASHLIGHT 5C 6C 11C 4C 3C 10C 7C 8C 9C 2C 1B Note: 1C Charger Base not shown (see page 11, Figure D) 1A NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as origin
Resumen del contenido incluido en la página 19
PARTS LIST - SANDER Pn art #D# escriptioPn art Descriptio 1y ABD atter 9r Gea 1r BBD attery Charge 1g 0 Bearnin 1e CCD harger Bas 1t 1 Shaf 1e DED nclosur 1r 2 Oscillato 2e DED nclosur 1g 3 Bearin 3h DSD witc 1t 4 Suppor 4e DPD ole Plat 1e 5 Base Plat 6r DMD oto 1w 6 Tapping Scre 7r DGD ea 1d 7 Sand Paper Pa 8g DBD earin 1w 8 Tapping Scre ASSEMBLY DIAGRAM - SANDER 2D 3D 1D 4D 18D 6D 7D 8D 9D 10D 11D 14D 12D 13D 1A Note: 1C 1B 15D 17D Charger Base 16D not shown NOTE: Some parts are listed and sho
Resumen del contenido incluido en la página 20
PARTS LIST - JIGSAW Pn art #D# escriptioPn art Descriptio 1y ABE atter 1r 2 Slide Ba 1r BBE attery Charge 1w 3 Scre 1e CCE harger Bas 1w 4 Hex Socket Scre 1e EEE nclosur 1r 5 Blade Holde 2d EGE uar 1e 6 Saw Blad 4e EPE ole Plat 1e 7 Slide Sleev 5h ESE witc 1k 8 Bloc 6r EEE xcentral Gea 1e 9 Base Plat 7t ESE upport Bracke 2t 0 Roller Suppor 8r EME oto 2r 1 Spring Washe 9e EEE nclosur 2r 2 Washe 1w 0ETE apping Scre 2t 3 Nu 1g 1ESE elf-Oiled Bearin 2y 4 Hex Ke ASSEMBLY DIAGRAM - JIGSAW 1A 2E 9E 8E
