Manual de instrucciones de Chief Manufacturing Truss/Pole Static Mount TPS-2000 Series

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
TRUSS/POLE STATIC MOUNT
Model: TPS-2000 SERIES
The TPS-2000 Series is designed for both pole and truss
installations quick and easy. This versatile mount
accommodates a large range of truss and pole
dimensions, includes security options and provides
flexible features perfect for exhibit, retail and digital
signage applications.
BEFORE YOU BEGIN
WARNING: ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE
OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF A

Resumen del contenido incluido en la página 2

Model: TPS-2000 SERIES Installation Instructions Parts Unpack the carton, and verify contents shown in Figure 1 Table 2: Parts below. If you are missing any of the listed components, please contact Customer Service at 1-800-582-6480. 10 PLATE, Truss 1 Available Mounting Clamp Kits 20 PLATE ASSEMBLY, Face 1 If a clamp kit was not ordered at the time of mount 30 NUT, Lock, Stover, 3/8" 2 purchase, or an alternate clamp kit is required, choose the appropriate kit from the table below and contact a

Resumen del contenido incluido en la página 3

Installation Instructions Model: TPS-2000 SERIES INSTALLATION Tighten Clamp Hardware Pole Mount (4 places) WARNING: THE STRUCTURAL MEMBER MUST BE CAPABLE OF SUPPORTING 4 TIMES THE 10 COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED. 1. Verify truss plate (10) is properly oriented for installation. Recessed, Slotted Flat Surface 10 Against Pole Figure 4: Position and Secure Back Plate Slot at bottom Truss Mount WARNING: THE STRUCTURAL MEMBER MUST BE CAPABLE OF SUPPORTING 4 TIME

Resumen del contenido incluido en la página 4

Model: TPS-2000 SERIES Installation Instructions center upper mounting hole and lower center slot in truss plate (10). Truss 5. Secure face plate (20) top to truss plate (10) using one 3/8" flat washer (40), and one 3/8" Nylock Nut (30). Face Plate (20) Mounting Stud Nylon Spacer (60) TrussPlate (10) (Mounted to Pole or Truss) Lock Nut (30) 10 Clamp with Hardware Mounting Stud (4 places) Flat Washer (40) Flat Washer (40) Nylon Spacer (50) Figure 5: Install Truss Plate to Truss Figure 7: Instal

Resumen del contenido incluido en la página 5

Installation Instructions Model: TPS-2000 SERIES ADJUSTMENTS Faceplate The TPS-2000 Series mount provides for limited roll adjustment to level the display after installation. Display To adjust display roll: 1. Loosen roll adjustment nuts. (See Figure 11) 2. Level Display. Mounting 3. Tighten roll adjustment nuts. (See Figure 11) Button Faceplate Display 2 deg. Mounting Truss Plate (10) Button Figure 9: Align Display 3. Secure display by placing the Q-Latch in the "Latched" position (See Figure

Resumen del contenido incluido en la página 6

Model: TPS-2000 SERIES Installation Instructions 6