Resumen del contenido incluido en la página 1
Adam Equipment
CBC SERIES
(P.N. 8680, Revision C4, February 2009)
Software rev.: 3.06 & above
© Adam Equipment Company 2009
Resumen del contenido incluido en la página 2
© Adam Equipment Company 2009
Resumen del contenido incluido en la página 3
CONTENTS 1.0 INTRODUCTION...................................................................................................... 3 2.0 SPECIFICATIONS.................................................................................................... 4 2.1 COMMON SPECIFICATIONS .............................................................................. 5 3.0 INSTALLATION........................................................................................................ 6
Resumen del contenido incluido en la página 4
© Adam Equipment Company 2009 2
Resumen del contenido incluido en la página 5
1.0 INTRODUCTION • The CBC series provides accurate, fast and versatile counting scales. • There are 2 type of scales within the CBC series- CBC scales are gram/ kilogram only scales and the CBCa scales are changeable from pounds to kilograms. The scales have the same functions except that CBCa scales have the ability to toggle between the two weighing units. • There are 5 models in each type with capacities up to 48 kg / 100lb. • The scales have stainless steel weighin
Resumen del contenido incluido en la página 6
2.0 SPECIFICATIONS CBC SERIES Model # CBC 4 CBC 8 CBC 16 CBC 32 CBC 48 Maximum 4000 g 8000 g 16kg 32 kg 48 kg Capacity Readability 0.1 g 0.2 g 0.0005 kg 0.001 kg 0.002 kg Tare Range -4000 g -8000 g -9.9995 kg -32 kg -48 kg Repeatability 0.1 g 0.2 g 0.0005 kg 0.001 kg 0.002 kg (Std Dev) Linearity ± 0.2 g 0.4 g 0.001 kg 0.002 kg 0.004 kg Units of g kg Measure CBCa SERIES Model: CBC 8a UNITS OF MAXIMUM TARE READABILITY REPEATIBIL
Resumen del contenido incluido en la página 7
2.1 COMMON SPECIFICATIONS Stabilisation 2 Seconds typical Time Operating -10°C - 40°C Temperature 14°F - 104°F Power supply 230 VAC 50/60 Hz 120 VAC available Battery Internal rechargeable battery (~90 hours operation) Calibration Automatic External Display 3 x 6 digits LCD digital displays Balance ABS Plastic, Stainless Steel platform Housing Pan Size 225 x 275mm 8.9” x 10.8” Overall 315 x 355 x 110mm Dimensions 12.4” x 14” x 4.3”
Resumen del contenido incluido en la página 8
3.0 INSTALLATION 3.1 LOCATING THE SCALE • The scales should not be placed in a location that will reduce the accuracy. • Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. • Avoid unsuitable tables. The table or floor must be rigid and not vibrate. • Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors. • Do not place near vibrating machinery. • Avoid
Resumen del contenido incluido en la página 9
• The scale will show the current software revision number in the “Weight” display window, for example V3.06. • Next a self-test is performed. At the end of the self-test, it will display “0” in all three displays, if the zero condition has been achieved. 4.0 KEY DESCRIPTIONS Keys Functions [0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit weight, and sample size. Used to clear the unit weight or an erroneous entry. [CE] [M+] Add the cu
Resumen del contenido incluido en la página 10
5.0 DISPLAYS The scales have three digital display windows. These are “Weight”, “Unit Weight” and “Count”. For CBCa, there are indicators for lb & kg 5.1 WEIGHT DISPLAY It has 6-digit display to indicate the weight on the scale. Arrows above symbols will indicate the following: Low battery, as above Net Weight Display, "Net" as above Stability indicator, "Stable" or symbol as above Zero indicator, "Zero" or symbol 0 as above Note: Un
Resumen del contenido incluido en la página 11
• If a preset count has been stored the "Preset" or symbol as above, will have an arrow above. 5.3 COUNT DISPLAY • This display will show the number of items on the scale or the value of the accumulated count. See the next section on OPERATION. • The arrow indicator will be seen above "Memory" when a value has been entered into the memory. 6.0 OPERATION NOTE: CBCa Scales only SETTING THE WEIGHING UNIT, lb or kg The scale will turn on displaying the last weighing unit selec
Resumen del contenido incluido en la página 12
• As a product is added only the weight of the product will be shown. The scale could be tared a second time if another type of product was to be added to the first one. Again only the weight that is added after taring will be displayed. • When the container is removed a negative value will be shown. If the scale was tared just before removing the container, this value is the gross weight of the container plus all products those were removed. The indicator above “Zero” will also be ON b
Resumen del contenido incluido en la página 13
by re-calculating it. To lock the Unit Weight and avoid re- sampling, press [U. Wt./Units]. • If the scale is not stable, the calculation will not be completed. If the weight is below zero, the “Count” display will show negative count. B. Entering a known Unit Weight • If the unit weight is already known then it is possible to enter that value using the keypad. • Enter the value of the unit weight in grams, using the numeric keys followed by pressing the [U. Wt./Units] key. Th
Resumen del contenido incluido en la página 14
automatically. • This feature is turned off as soon as the number of items added exceeds the count used as a sample. 6.3.4 Check-counting • Check-counting is a procedure to cause an alarm to sound when the number of items counted on the scale meets or exceeds a number stored in the memory by using the [Pst] key. • The value to be stored is entered from the keyboard. Enter the numeric value to be stored using the numeric keys. Then press the [Pst] key to store the value. • To
Resumen del contenido incluido en la página 15
6.3.6 Automatic Accumulated Totals • The scale can be set to automatically accumulate totals when a weight is placed on the scale. This eliminates the need to press the [M+] key to store values into the memory. However the [M+] key is still active and can be pressed to store the values immediately. In this case the values will not be stored when the scale returns to zero. • See the Section 9.0 on RS-232 Interface for details on how to enable Automatic Accumulation. 7.0 PARAMET
Resumen del contenido incluido en la página 16
SETTING OF PIN • Display will show “F2” “Pin”. This parameter allows setting of a new password number. • Press [Tare]. The “WEIGHT” display will show "Pin 1" • Enter the new password number. The “Unit Weight” display will show dashes. Press [Tare]. • The “WEIGHT” display will change to "Pin 2 ", Enter the password again and press [Tare]. • The display will show "donE" to show the new password has been accepted and will return to the menu. Record the new password in a secur
Resumen del contenido incluido en la página 17
• The displays will then show the calibration weight suggested as a whole number. For example: “LoAd” “04” “KiLoS” Either put this weight on the platform after the stable symbol is on or enter the desired value in whole integer and then press [Tare]. • Place the weight on the platform and press [Tare] again. • At all times the scale should be stable before pressing the [Tare] key to accept a weight. The stability indicator will turn on to show the value is stable. • W
Resumen del contenido incluido en la página 18
Specifications: RS-232 output of weighing data ASCII code Adjustable Baud rate, 600, 1200, 2400, 4800, 9600 and 19200 baud 8 data bits No Parity Connector: 9 pin D-subminiature socket Pin 3 Output Pin 2 Input Pin 5 Signal Ground The scale can be set to print text in English, French, German or Spanish. See the RS-232 parameters section for details. Data Format-Normal Output: Date 12/09/2006 Time 14:56:27 Gross Wt
Resumen del contenido incluido en la página 19
In other languages the format is the same but the text will be in the language selected. Description ENGLISH FRENCH GERMAN SPANISH Print gross Gross Wt Pds Brut Brut-Gew Pso Brut weight Net weight Net Wt. Pds Net Net-Gew Pso Net Weight per Unit Wt. Pds unit Gew/Einh Pso/Unid unit counted Number of Pcs Pcs Stck. Piezas items counted Number of No. Nb. Anzhl Num. weighings added to subtotals Total weight Total Total Gesamt Total and count printed Print date Date Date Da
Resumen del contenido incluido en la página 20
9.2 RS-232 SETUP The RS-232 interface uses parameters set by the user for language, baud rate and date format. Press and hold the [Print] key for 4 seconds to access the parameters. Press [U. Wt./Units] to scroll through the options and [Tare] to confirm the change and then advance to the next parameter. When a parameter is entered by pressing [Tare], the displays will guide you through the parameter selected and the options available. The parameters and their functions ar
