Resumen del contenido incluido en la página 1
00cv_HTY-750_B.fm Page 1 Thursday, September 6, 2007 1:22 PM
B
PHILLIPS 763, 764, 765,
766, 767, 768
SATELLITE TUNER
PIONEER 748, 785, 747
ECHOSTAR 822
RADIO SHACK749
GE 837, 838, 839
SCIENTIFIC ATLANTA
GENERAL INSTRUMENT
752, 753, 754
823
SONY 756, 757
HITACHI 824
TOCOM 755
HUGHES 843, 844, 845, 846
UNIVERSAL 769, 772, 773,
JVC 822
774, 775
MAGNAVOX 825
VIEWSTAR 764, 766, 776,
PANASONIC 826, 829
777, 778, 779, 782
PHILLIPS 825, 843, 844,
845, 846, 847,
848, 849
PRIMESTAR 827
PROSCAN 837
Resumen del contenido incluido en la página 2
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. Caution: Read this before operating this unit. 1 To assure the finest performance, please read this manual 21 The batteries shall not be exposed to excessive heat such as carefully. Keep it in a safe place for future reference. sunshine, fire or the like. 2 Install this sound system in a well ventilated, cool, dry, clean WARNING place with at least 5 cm (2 in) of space above (or below) this unit TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO –
Resumen del contenido incluido en la página 3
BASIC ADVANCED ADDITIONAL English SETUP OPERATION OPERATION INTRODUCTION PREPARATION INFORMATION Contents Enjoying stereo sound...........................................50 INTRODUCTION Playing back sound clearly (My Beam)...............51 Using auto-adjust function....................................... 51 Overview.................................................................. 2 Using manual-adjust function.................................. 52 Features .....................................
Resumen del contenido incluido en la página 4
Overview Overview It is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. Yamaha HTY-750 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround
Resumen del contenido incluido en la página 5
English INTRODUCTION Features Features Digital Sound Projector™ Compatibility with the Newest Technologies The Digital Sound Projector technology allows one slim This unit employs decoders compatible with Dolby unit to control and steer multiple channels of sound to Digital, DTS, Dolby Pro Logic, Dolby Pro Logic II, and generate multi-channel surround sound, thus eliminates DTS Neo:6. the need for satellite loudspeakers and cabling normally ◆ Dolby Digital This is the standard audio signal for
Resumen del contenido incluido en la página 6
Features The “ ” logo and “IntelliBeam” are trademarks of YAMAHA Corporation. TruBass, SRS and the “ ” symbol are registered trademarks of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks ™ is a trademark of DiMAGIC Co., Ltd. of Dolby Laboratories. “DTS” and “Neo:6” are registered trademarks of DTS, Inc. Manufactured under license from 1 Ltd. Wo
Resumen del contenido incluido en la página 7
English INTRODUCTION Using this manual Using this manual Notes This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. y indicates a tip for your operation. This manual is printed prior to production. Designs and specifications are subject to change in part as a r
Resumen del contenido incluido en la página 8
Supplied accessories Supplied accessories Check that you have received all of the following parts. Remote control ( ×1) Cable clamp ( ×1) Optical cable ( ×1) STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP IntelliBeam microphone 5BEAM ST+3BEAM 3BEAM ( ×1) Digital audio pin cable ( ×1) 1 2 3 STEREO MY BEAM MY SUR. 4 5 6 78 9 SUR. DECODE 0 +10 CH LEVEL MENU (Orange) TV/AV ENTER Cardboard microphone YSP stand ( ×1) TEST RETURN Audio pin
Resumen del contenido incluido en la página 9
English INTRODUCTION Controls and functions Controls and functions Front panel INTELLIBEAM MIC INPUT VOLUME STANDBY/ON 1426 3 5 1 INTELLIBEAM MIC jack 5 VOLUME +/– Connect the supplied IntelliBeam microphone for AUTO Controls the volume level of all audio channels (see SETUP (see page 32). page 43). 2 Front panel display 6 STANDBY/ON Shows information about the operational status of this Turns on the power of this unit or sets it to the standby unit. mode (see page 27). 3 Remote control sensor
Resumen del contenido incluido en la página 10
Controls and functions Front panel display 1 2 3 4 5 6 7 8 9 1 SRS TruBass indicator 7 MULTI indicator Lights up when TruBass is turned on (see page 63). Lights up when this unit detects a multi channel digital audio signal. 2 EQUAL indicator 8 Volume level indicator Lights up when the TV volume equal mode is selected (see page 53). Displays the current volume level. 3 NIGHT indicator 9 Multi-information display Lights up when one of the night listening enhancers is Shows information with alph
Resumen del contenido incluido en la página 11
English INTRODUCTION Controls and functions Rear panel 9 L R VCR TV/STB SUBWOOFER VIDEO TV/STB AUX DVD SYSTEM CONNECTOR OPTICAL COAXIAL AUDIO INPUT OUT DIGITAL INPUT 12 3 4 5 6 7 8 L R VCR TV/STB SUBWOOFER VIDEO TV/STB AUX DVD SYSTEM CONNECTOR OPTICAL COAXIAL AUDIO INPUT OUT DIGITAL INPUT 1 VCR AUDIO INPUT jacks 6 AUX OPTICAL DIGITAL INPUT jack Connect your VCR via an analog connection (see Connect an external component via an optical digital page 19). connection (see page 23). 2 TV/STB AUDIO
Resumen del contenido incluido en la página 12
Controls and functions Remote control This section describes the functions of the remote control 1 Infrared window used to control this unit. Some buttons marked with an Outputs infrared control signals. Aim this window at the asterisk (*) share the common functions between the YSP component you want to operate. and TV/AV operation modes (N). 2 STANDBY/ON y Turns on the power of this unit or sets it to the standby You can also control other components using the remote control mode (see page
Resumen del contenido incluido en la página 13
English INTRODUCTION Controls and functions H MACRO Use to set the TV macro (see page 83). I SLEEP Sets the sleep timer (see page 54). J INPUTMODE Toggles between input modes (AUTO, DTS, and ANALOG) (see page 70). K Beam mode buttons Change the beam mode settings (see pages 44, 50, and 51). L SUR. DECODE Selects the surround mode for playback (see page 47). M MENU Displays the setup menu on your TV monitor (see pages 33 and 57). N Operation mode selector Selects the operation mode of this uni
Resumen del contenido incluido en la página 14
Controls and functions This section describes the functions of the remote control 1 Numeric buttons used to control other components when the TV/AV mode Enter numbers. is selected with the operation mode selector (4). 2 Cursor buttons / / / , ENTER Use to select DVD menu items. STANDBY/ON POWER POWER 3 MENU AV TV Displays the DVD menu. 4 Operation mode selector Selects the operation mode of this unit. Select YSP when STB VCR DVD AUX TV INPUT1 INPUT2 MACRO operating this unit and select TV/A
Resumen del contenido incluido en la página 15
English PREPARATION Installation Installation This section describes a suitable installation location to install this unit using a rack. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first. Before installing this unit Installing this unit This unit creates surround sound by reflecting
Resumen del contenido incluido en la página 16
Installation ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible. 14 En
Resumen del contenido incluido en la página 17
English PREPARATION Installation ■ Using a rack Install this unit under your TV in a commercially available rack. This unit Note Make sure that the rack is large enough to allow adequate ventilation space around this unit (see page 13) and that it is strong enough to support the weight of both this unit and your TV. 15 En
Resumen del contenido incluido en la página 18
Connections Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input For audio output 2 optical digital input jacks 1 subwoofer output jack 1 coaxial digital input jacks For video output 2 sets of analog input jacks 1 analog output jack Use these jacks/terminal to connect external components such as your TV, DVD player, VCR, digital satellite tuner, cable TV tuner, digital air wave tuner, and game console. Further, by conne
Resumen del contenido incluido en la página 19
English PREPARATION Connections Before connecting components ■ Cables used for connections ■ Notes on connecting the optical cable Pull out the cap before connecting the optical cable. Audio When you are not using the optical cable, be sure to put the cap back in place. Audio pin cable (supplied) When inserting the cable into the optical digital jack, (White) (White) make sure the direction is correct. (Red) (Red) Cap Optical cable (supplied) ■ Affixing cables To prevent cables from bec
Resumen del contenido incluido en la página 20
Connections Connecting a TV For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD for easy viewing when you adjust the system parameters in SET MENU. y To prevent t
