Resumen del contenido incluido en la página 1
Wireless LAN 802.11g Series
WLF-2454AP-S
User’s Guide
Version 1.0
0
Alloy Wireless 802.11g User’s Guide www.alloy.com.au
Resumen del contenido incluido en la página 2
Contents 1. Introduction ...............................................................................................
Resumen del contenido incluido en la página 3
1. Introduction Thank you for purchasing the WLF2454AP-S Wireless 802.11g AP Router. This user guide will assist you with the installation procedure. The package you have received should contain the following items: AP Router Wireless 802.11g AP Router Power Supply / Cord Ethernet Cable Installation CD Note: if anything is missing, please contact your dealer. 2 Alloy Wireless 802.11g User’s Guide www.alloy.com.au
Resumen del contenido incluido en la página 4
2. Safety Notification Your Wireless AP Router should be placed in a safe and secure location. To ensure proper operat
Resumen del contenido incluido en la página 5
3. Hardware Installation Front Panel The front panel provides the following status LED’s. LED STATUS Description PWR/STAT Off No power Red On 1. Power on Red Blink 1. System startup LAN Off no Ethernet link detected Green On 10/100Mbps Fast Ethernet link detected. No activity. Green Indicates traffic on the 10/100 Mbps LAN interface Blink Orange WAN Indicates traffic on the 10 Mbps WAN interface Blink Yellow Indicates the device is linking to another wireless devic
Resumen del contenido incluido en la página 6
4 Web Management Settings TURN ON POWER SUPPLY A ‘Quick’ power cycle can cause the AP’s firmware to become corrupt.
Resumen del contenido incluido en la página 7
4.1. Setup ENSURE YOU HAVE THE CORRECT NETWORK SETTINGS IN YOUR COMPUTER To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect to the WEB management 192.168.1.1. Setup This screen contains all of the Router's basic setup functions. . Most users will be able to configure the AP Router and get it working properly using the settings on this screen. Some Internet Service Providers (ISPs) will require that you enter specific informat
Resumen del contenido incluido en la página 8
PPPoE (Point-to-Point Protocol over Ethernet) PPTP (Point-to-Point Tunneling Protocol) These options can be selected fr
Resumen del contenido incluido en la página 9
LAN IP Address and Subnet Mask: This is the Router's IP Address and Subnet Mask as seen on the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet Mask. Wireless: This section provide the Wireless Network settings for your WLAN 2.4GHz Settings SSID: The service set identifier ( SSID ) or network name. It is case sensitive and must not exceed 32 characters, which may be any keyboard character. You must select the same SSID for all t
Resumen del contenido incluido en la página 10
4.2. Security Router Password: Changing the password for the AP Router is as easy as typing the password into the Ent
Resumen del contenido incluido en la página 11
Web Filters: Using the Web Filters feature, you may enable up to four different filters. • Proxy - Use of WAN proxy servers may compromise network security. Denying Proxy will disable access to any WAN proxy servers. To enable proxy filtering, click the box next to Proxy. • Java - Java is a programming language for websites. If you deny Java, you run the risk of not having access to Internet sites created using this programming language. To enable Java filtering, click the box
Resumen del contenido incluido en la página 12
4.3. System Restore Factory Defaults: Click the Yes button to reset all configuration settings to factory default v
Resumen del contenido incluido en la página 13
4. On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file. 5. Double-click the firmware upgrade file. 6. Click the Upgrade button, and follow the on-screen instructions. Note: Do not power off the Router or press the Reset button while the firmware is being upgraded. Multicast Pass-Through: IP Multicasting occurs when a single data packet is sent to multiple recipients at the same time. Using the Multicast Pass-Through feature, the Router allo
Resumen del contenido incluido en la página 14
To clone your network adapter’s MAC address onto the Router and avoid calling your ISP to change the registered MAC addres
Resumen del contenido incluido en la página 15
4.4. DHCP The DHCP screen allows you to configure the settings for the Router's Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. If you choose to enable the Router's DHCP server option, you must configure your entire network of PCs to connect to a DHCP server, the Router. If you disable the Router's DHCP server function, you must c
Resumen del contenido incluido en la página 16
WINS: The Windows Internet Naming Service (WINS) manages each PC’s interaction with the Internet. If you use a WINS server
Resumen del contenido incluido en la página 17
4.5. SNMP SNMP: The SNMP screen allows you to customize the Simple Network Management Protocol (SNMP) settings. SNMP is a popular network monitoring and management protocol. SNMPv2c To enable the SNMP support feature, select Enable. Otherwise, select Disable. Identification Contact In the contact field, enter contact information for the Router. Device In the Device Name field, enter the name of Name the Router. Location In the Location field, specify the area or location where
Resumen del contenido incluido en la página 18
4.6. Status This screen displays the Wireless Router's current status and settings. This information is read-only.
Resumen del contenido incluido en la página 19
4.7. Advanced Wireless Wireless MAC Filters: This function allows the administrator to have access control by entering MAC addresses of client stations. When this function has been Enabled, two new options will appear. Depending on the filtering purpose, it can be selected to Prevent or Permit access. Click on Edit MAC Filter List to add the client stations to the MAC list. The table can store up to 40 different MAC addresses. Please follow the format that is required when
Resumen del contenido incluido en la página 20
Authentication Type: Auto: Auto is the default authentication algorithm. The AP will change its authentication type a
