Resumen del contenido incluido en la página 10
Sample Scenario 1 2 5 4 3 6 A typical network setup in a home or small office (as shown above) might contain the following devices. For specific information on setting up your network with the DI-704UP please see the Network Setup section on the following page. You will need broadband Internet access (a Cable or DSL subscription line into your home or office) Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to the DI-704UP wireless bro
Resumen del contenido incluido en la página 11
Network Setup Turn everything off. A. Power OFF your Cable or DSL modem. If your modem does not have an on/off switch, disconnect the power cable. B. Turn OFF your computer. C. Do NOT connect the power adapter to your D-Link router. Connect the D-Link Router Cables. A. Connect the Ethernet (or networking) cable from the Cable or DSL modem to the WAN port of the router. B. Use the D-Link supplied Ethernet cable to connect the Ethernet port (Network Card) of your computer to one of the LAN ports o
Resumen del contenido incluido en la página 12
Using the Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click OK Once you have logged in, the Home screen will appear. Click Run Wizard 12
Resumen del contenido incluido en la página 13
Using the Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next 13
Resumen del contenido incluido en la página 14
Using the Setup Wizard (continued) Set up your Time Zone. You have the option to the set standard time for your router. To change the default selection, select the drop down arrow and choose the correct time zone. Click Next Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next Select Others only if you use PPTP in Europe or BigPond C
Resumen del contenido incluido en la página 15
Using the Setup Wizard (continued) If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service.) Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. What is a MAC address? Each network adapter has a discrete Media Access Control (MAC) address. Note that some computers and peripherals may already include built-in network adapters. Click Next If y
Resumen del contenido incluido en la página 16
Using the Setup Wizard (continued) If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Please be sure to remove any existing PPPoE client software installed on your computers. Enter in the username and password provided to you by your ISP. Click Next Click Restart 16
Resumen del contenido incluido en la página 17
Using the Configuration Menu Whenever you want to configure your network or the DI-704UP, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI- 704UP. The DI-704UP default IP Address is shown below: Open the web browser. Type in the IP Address of the DI-704UP. Home > Wizard Note: If you have changed the default IP Address assigned to the DI-704UP, make sure to enter the correct IP Address. The factory default User name is “admin” and the defaul
Resumen del contenido incluido en la página 18
Using the Configuration Menu (continued) Home > Wizard (continued) The Home>Wizard screen will appear upon log in. Please refer to the Quick Instal- lation Guide for more information regarding the Setup Wizard. Clicking Apply will save changes made to the page Clicking Cancel will clear changes made to the page Clicking Help will bring up helpful information regarding the page Clicking Restart will restart the router. (Necessary for some changes.) 18
Resumen del contenido incluido en la página 19
Using the Configuration Menu (continued) Home > WAN (continued) WAN is short for Wide Area Network. The WAN settings can be referred to as the Public settings. All IP information in the WAN settings are public IP addresses which are accessible on the Internet. The WAN settings consist of four options: Dynamic IP Address, Static IP Address, PPPoE, and Others. Select the appropriate option and fill in the information needed to connect to your ISP. Choose Dynamic IP Address to obtain IP address inf
Resumen del contenido incluido en la página 20
Using the Configuration Menu (continued) Home > WAN (continued) MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address. It is not recommended that you change the default MAC address unless required by your ISP. Primary/Secondary DNS Address: Enter a DNS Address if you do not wi
Resumen del contenido incluido en la página 1
D-Link DI-704UP
TM
Express EtherNetwork
Broadband Router with USB Print Server
Manual
Building Networks for People
Resumen del contenido incluido en la página 2
Contents Package Contents ................................................................................3 Introduction............................................................................................4 Features and Benefits ...........................................................................5 LEDs ....................................................................................................6 Connections ....................................................................
Resumen del contenido incluido en la página 3
Package Contents Contents of Package: TM D-Link DI-704UP Express EtherNetwork Broadband Router with USB Print Server Manual, Warranty and Print Server Software on CD Quick Installation Guide Power Adapter - AC 5V, 2A CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller. WARNING! Using a power supply with a different voltage rating than the one included with the DI-704UP will cause damage and void the warranty for this product. System Requirements for Confi
Resumen del contenido incluido en la página 4
Introduction Thank you for purchasing the DI-704UP Express EtherNetwork Broadband Router with USB Print Server. The DI-704UP is an Ethernet Broadband Router with a built-in 4-port switch. It also features a USB port to share a USB printer on the home or office network and includes a print server application for Windows. As many as four computers can be connected directly to the router’s integrated switch, using its four 10/100Mbps AutoMDIX Ethernet ports. More computers can be added to the netwo
Resumen del contenido incluido en la página 5
Features & Benefits Firewall Features Filtering - Easily applied filtering based on Media Access Con- trol (MAC) Addresses, IP Addresses, Port Addresses, and time schedule allows or denies computer on the network access to the Internet. Network Address Translation - NAT allows your private net- work to share a single public IP address. All your computer con- nected to the DI-704UP will be on a private network shielded from Internet intruders. Built-In 4-Port Switch - Allows you to quickly an
Resumen del contenido incluido en la página 6
LEDs WAN LED Printer LED Status LED POWER LED LOCAL NETWORK LEDs LED LED Activity A solid light indicates a proper connection to Power the power supply. Flashes consistently to indicate that the Status DI-704UP is working properly. A solid light indicates that the unit is not working properly. A Solid light indicates connection on the WAN WAN port. This LED blinks during data transmission. LOCAL A solid light indicates a connection to an NETWORK Ethernet-enabled computer on ports 1-4. This LEDs
Resumen del contenido incluido en la página 7
Connections Printer Port Reset Button WAN Port LAN Ports Receptor for Power Adapter Connect the supplied power adapter that came Receptor for with the unit. Using the wrong power adapter will Power Adapter damage the unit. Reset button is to reset the device to its factory Reset Button default settings. Connect to the printer using a USB cable. This Printer Port feature is used to share the printer on the network. WAN port is the connection point for your DSL or WAN Port Cable modem. LAN port i
Resumen del contenido incluido en la página 8
Introduction to Broadband Router Technology A router is a device that forwards data packets from a source to a destination. Routers can work on Open System Interconnection (OSI) layer 3, which for- wards data packets using an IP address and not a MAC address. A router will forward data from the Internet to a particular computer on your LAN. The information that makes up the Internet gets moved around using routers. When you click on a link on a web page, you send a request to a server to show yo
Resumen del contenido incluido en la página 9
Introduction to Local Area Networking A Local Area Network (LAN) is typically an Ethernet-based network that con- nects several computers together over a small area such as a building or group of buildings. LAN’s can also be connected over large areas. A collection of LANs connected over a large area is called a Wide Area Network (WAN). There are many types of media that can connect computers together. The most common media is CAT5 cable; UTP or STP twisted pair wire. Each computer must have a N
