Resumen del contenido incluido en la página 1
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Spring,1998
Printed in Korea
Resumen del contenido incluido en la página 2
Caution for Authority Microsoft, windows, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Compact Flash is a trademark of SanDisk Corporation in the United States. HITACHI is a trademark of Hitachi ,Ltd. CopyrightC1998, Hitachi,Ltd. Information to Users Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class
Resumen del contenido incluido en la página 3
Warning Charges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC rules. In order to maintain compliance with FCC regulations, cables (standard) packed together with this equipment must be used. For VGA display, the unique cable (model:HPW-WVCB) must be used. Operation with non-approved equipment or un
Resumen del contenido incluido en la página 4
6. This product should be operated from the type of power source in dicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. 7. Do not locate this product where the cord will be walked on. 8. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord's ampere rating. Also, make sure that the total of all pr
Resumen del contenido incluido en la página 5
13.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 14.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 15.Use caution when installing or modifying telephone lines. 16.Avoid using this equipment during an electrical storm. There may be a remote risk of electric shock from lightning. 17.Do not use this equipment to report a gas leak in the vicinity of the leak. F
Resumen del contenido incluido en la página 6
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment HPW-200EC, please contact HITACHI Home Electronics(America), Inc. [ Phone 1 (800) - HITACHI ] for repair and(or) warranty information. If the tro
Resumen del contenido incluido en la página 7
Industry Canada Terminal Equipment Statement "NOTICE : The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be c
Resumen del contenido incluido en la página 8
Caution to users Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Caution for Rechargeable Li-ion Battery Pack Please don't reconstruct rechargeable Li-ion battery pack. In rechargeable Li- ion battery pack, there is safety device and protection device to prevent from damage. If you tamper with this device, that may generate heat, smoke, and cause damage and ignition of rechargeable L
Resumen del contenido incluido en la página 9
color or shape, don't use this pack and contact sales company. It is possible that generate heat, smoke, damage and ignition. Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Attention Il y a danger d'explosion s'il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du me me type recommande par le constructeur. Mett
Resumen del contenido incluido en la página 10
Welcome You can take the Handheld PC just about anywhere. With your Handheld PC, you are free to roam, take documents with you, keep track of appointments, send and receive e-mail, and connect to the Internet. This User's Guide will help you install your batteries and introduce you to the hardware features of your Handheld PC. External appearance LCD and Touch Panel Stylus Pen Speaker Quick Launch key Power Switch MIC Phone Jack Cover REC Button CF Card slot PCMCIA Card slot Eject Knob (PCMCIA C
Resumen del contenido incluido en la página 11
Battery Cover Reset Switch Battery Cover Lock Switch Eject Knob RAM/ROM Memory Cover (PCMCIA Card) RAM/ROM Memory Cover Screw Picture from the Bottom of the Handheld PC In addition to the Handheld PC, you should have received the following accessories: Rechargeable Li-ion Battery Pack Handheld PC Serial Cable Handheld PC User's Guide R R Microsoft Windows CE The Handheld PC Companion (User's Guide) Stylus Pen R R CD-ROM with Desktop Software for Microsoft Windows CE AC adapter Bonus Software C
Resumen del contenido incluido en la página 12
Running your Handheld PC Batteries and power You can run your Handheld PC on battery power or with the AC adapter. In addition, the Backup battery provides protection against loss of data. The main battery requires rechargeable Li-ion battery pack. If you run your Handheld PC on main battery while using a high power consumption device such as a PC Card, your battery will drain before long. It is recommended that you use the AC adapter when a PC Card is in use. Backup battery is a rechargeable c
Resumen del contenido incluido en la página 13
Operating your Handheld PC with the Main batteries To insert the rechargeable Li-ion battery pack 1 Slide the Main Battery Cover lock switch to the FREE position, then slide the Main Battery Cover in the direction of the arrow. 2 Insert rechargeable Li-ion battery pack into the main battery compartment in the direction indicated as align Battery port. 3 Close the Main Battery Cover and slide the Main Battery Cover lock switch to the LOCK position. Slide Battery Cover Battery Cover Lock Switch
Resumen del contenido incluido en la página 14
Note Conserving battery power. 1. Don't use battery power for communication. 2. Shorten auto-suspend time. To change the main battery. Main battery is a rechargeable Li-ion battery. It can be recharged about 500 times approximately. If main battery is dead, please replace new one. 1 Slide the battery cover lock switch to the FREE position, then slide the main battery cover in the direction of the arrow. 2 Insert the new battery as described on page 12. Caution Before you remove the main batter
Resumen del contenido incluido en la página 15
Operating your Handheld PC with the AC adapter. 1 Connect the AC adapter to the Handheld PC, and then plug it into an AC outlet. 2 Make sure the battery cover lock switch to the LOCK position. DC-IN AC Adapter Jack AC Adapter Connection Note The Handheld PC will not operate while the battery cover lock switch is in the FREE position. Charging rechargeable Li-ion battery pack The rechargeable Li-ion battery pack is recharged whenever your Handheld PC receives power from the AC adapter. Charg
Resumen del contenido incluido en la página 16
charging check LED Caution When you try to recharge a fully charged battery immediately, charging stops to protect the battery. If you use your handheld PC in high temperature environment, charging LED will be illuminated RED color and stop charging automatically. In this case, disconnect AC adapter and after cooling connect AC adapter to charge. Notification LED LED is blinking while Alarm is running. Notification LED 15
Resumen del contenido incluido en la página 17
Using the stylus Pen To use the stylus Pen: Pull and Push the stylus on the right, and use it. Stylus Pen Push/Pull Using the Stylus Pen Wireless infrared transfer Your Handheld PC includes an infrared (IR) port that enables you to transfer files to or from Desktop PC, or another Handheld PC. No special hardware is required for wireless infrared communication. Your Handheld PC must be correctly aligned so their infrared ports face each other and are less than 70cm (27 inches) apart. IR Po
Resumen del contenido incluido en la página 18
IR Port IR Port Data transfer Between Handheld PCs Interface cable Your Handheld PC's SERIAL/VGA connector is located on the left side of the Handheld PC. The serial cable included with your Handheld PC is configured for connection to a desktop computer only. Handheld PC Connector (26Pin Tongue-in-Groove Type) To Desktop Computer PC Serial Port 9 Pin Connector Left Side View of Handheld PC Note : If you want detailed description, please refer to The Handheld PC Companion R (Windows C
Resumen del contenido incluido en la página 19
PC card slot You can use many types of PC cards (also known as PCMCIA cards) with your Handheld PC, including memory cards for saving information, and PC modem cards for communication. A list of compatible PC cards is available in Page 34, "PC card compatibility" . To insert a PC card Insert a PC card in the PC card slot [ figure a)]. To remove a PC card Push the PC Card Eject Knob in the direction of the arrow [ figure b)]. PCMCIA Card Eject Knob PCMCIA Card insert b) Bottom Side View a) Right
Resumen del contenido incluido en la página 20
Using the CF card. (also known as Compact Flash card) To insert a CF card 1 Remove the Protection Cover. 2 Insert a CF card in the Compact Flash card slot. 3 Set the Protection Cover. To remove a CF card 1 Remove the Protection Cover. 2 Push the Eject Knob. Pull CF card cover To remove the CF card Note A CF (Compact Flash) card is Memory only. Caution 1 Don't insert the PC/CF card at an angle. 2 Don't insert or remove the PC/CF card during access. 3 Don't power off during the working of PC/CF
