Resumen del contenido incluido en la página 1
®
TM
Rimage 480i Printer
User Guide
Resumen del contenido incluido en la página 2
Corporate Headquarters: Rimage Corporation reserves the rights to make improvements to the equipment and software Rimage Corporation described in this document at any time without any 7725 Washington Avenue South prior notice. Rimage Corporation reserves the right to Minneapolis, MN 55439 revise this publication and to make changes from USA time to time in the content hereof without obligation of 800 553 8312 (toll free US) Rimage Corporation to notify any person or organization o
Resumen del contenido incluido en la página 3
Rimage 480i Printer Support information US, Asia/Pacific, Mexico/Latin America Europe Rimage Corporation Rimage Europe GmbH 7725 Washington Avenue South Albert-Einstein-Str. 26 Minneapolis, MN 55439 63128 Dietzenbach Germany USA Tel: +49-(0) 6074-8521-0 Attn: Rimage Services FAX: +49-(0) 6074-8521-21 Contact Rimage Services: Rimage Europe Technical Website: Email: http://www.rimage.com/support_form.cfm http://www.rimage.com/support.html North America: 800-553-8312 Select the
Resumen del contenido incluido en la página 4
Contents Contents Introduction ...................................................................................... 1 Operating System requirements............................................................................1 Media requirements...............................................................................................1 Ink requirements....................................................................................................1 Rimage 480i Printer specification
Resumen del contenido incluido en la página 5
Introduction Introduction This manual provides the information needed to operate the Rimage 480i Printer, identify the parts, and configure the Rimage 480i printing preferences. To set up and install your Rimage 480i Printer, refer to the Rimage 480i QuickStart Guide. Operating System requirements The Rimage 480i Printer runs only on Windows 2000 Professional and Windows XP Professional and Home editions. It requires one USB port. Media requirements You must use discs that are coat
Resumen del contenido incluido en la página 6
Rimage 480i Printer Rimage 480i Printer specifications Print technology Thermal inkjet printing Print resolution Up to 4800 dpi Print driver Microsoft Windows® 2000 Professional Service Pack 4 or XP Professional Service Pack 2 Color spectrum 16.7 million Droplet size 3 pico-liters Pixel density 5.76 million pixels per square inch Media types Standard inkjet printable surface 120 mm CD-R/DVD-R Power 100 – 240 VAC, 1.0 A, 50-60 Hz, auto-ranging Physical size Height – 6.00” (15.2 cm
Resumen del contenido incluido en la página 7
Identify the parts of the Rimage 480i Printer Identify the parts of the Rimage 480i Printer This section describes the Rimage 480i Printer hardware and its features. The Rimage 480i Printer has some major parts that you need to know to operate and maintain the printer. These features are shown in the Front and Side views. Side view Printer Service Door USB Ink Access Connection Door Grip Fan Power Cable Front view Printer Service Door Ink Cartridge Printer Control Panel Ac
Resumen del contenido incluido en la página 8
Rimage 480i Printer Printer control panel The Rimage 480i Printer control panel has three buttons and three LEDs to indicate certain conditions. The table below explains each of these buttons. LED: Light-emitting diode. A type of diode that emits light when current passes through it. Image Name Functionality Cancel When you press the Cancel button, it provides limited functionality to cancel printing. / The amber LED flashes when there is a hardware issue such as th
Resumen del contenido incluido en la página 9
Operate the Rimage 480i Printer Operate the Rimage 480i Printer This chapter provides the information that you need to use and maintain your Rimage 480i Printer. Powering up the printer The printer can be in either the ON state (Power LED on) or the sleeping state (Power LED off). Press the Power button to bring the printer out of the sleep state and into the ON state. Accessing the Power and USB Cables To access the power and USB cables, you must remove the Cable Access Door a
Resumen del contenido incluido en la página 10
Rimage 480i Printer 2. Lift the ink cartridge latch to the open position. Ink cartridge latch 3. If an ink cartridge is already installed, slide the ink cartridge out of the ink cartridge cradle. 4. Remove a new ink cartridge from its packaging and carefully remove the protective tape that covers the ink nozzles. Important Do not touch the nozzles or the copper contacts on the ink cartridges. If you touch these parts, clogs, ink failure, and poor electrical connections are lik
Resumen del contenido incluido en la página 11
Operate the Rimage 480i Printer Placing a disc on the printer tray To avoid scratching or damaging the recording surface of the disc, it is important to properly place the disc on the printer tray. Use this procedure to properly place the disc on the printer tray. Note: If you select Print from your software application, the printer tray opens automatically. 1. To open the printer tray, press . The printer tray opens. 2. Carefully place the disc on the printer tray, aligning the ho
Resumen del contenido incluido en la página 12
Rimage 480i Printer Changing the fan filter The fan filter is a consumable item, so you will need to change it after 20 printer cartridges. Use this procedure to change the fan filter. 1. With a small screwdriver, gently pull on the fan grating. The protective grating and fan filter should come off of the fan housing easily. 2. Gently pull the fan filter housing away from the back of the Rimage 480i. 3. Remove the white filter material. 4. Replace the filter with part number 304219-0
Resumen del contenido incluido en la página 13
Operate the Rimage 480i Printer Setting up your printing preferences Printing Preferences allows you to set up and run your Rimage 2000i to produce the best possible label on your discs. Through Printing Preferences, you can: Set the print quality Tip For additional information about these features, access the Adjust the ink volume used online help in Printing Change or enable masking Preferences. Center the image on the disc Check the ink levels Add, edit, or delete a watermark Se
Resumen del contenido incluido en la página 14
Rimage 480i Printer Adding, editing, or deleting a watermark Tip For additional This functionality allows you to create a new watermark or edit a information about these currently existing watermark that you can print on your disc. You features access the can also delete a current watermark that you created from this online help in Printing tab. Preferences. 1. Navigate to Printing Preferences. 2. Select the Effects tab. 3. From the Watermarks drop-down list, select the desir
Resumen del contenido incluido en la página 15
Operate the Rimage 480i Printer Adjusting the ink volume used Tip For additional This functionality allows you to adjust the amount of ink that is information about these used. features access the 1. Navigate to Printing Preferences. online help in Printing Preferences. 2. Select the Basics tab. 3. Select Advanced Features. The Advanced Features window opens. 4. With the Ink Volume and Dry Time sliders, you can increase or decrease the desired ink volume and drying time.
Resumen del contenido incluido en la página 16
Rimage 480i Printer Changing or enabling masking Tip For additional This functionality allows you to adjust the non-printable area, or information about these mask, settings for standard CD/DVD 120 mm media. This allows features access the you to print a rectangular or square image without the edges online help in Printing overlapping the disc edges. If you print on areas of the disc Preferences. where the surface is not suitable for printing, the ink can smear or run. 1. Navig
Resumen del contenido incluido en la página 17
Operate the Rimage 480i Printer 4. Adjust the cartridge alignment. In this example, the +64 line is the straightest. To align this parameter, enter 64 in the Photo to Color Vertical field. a. Enter the number that corresponds to the straightest line for the following groups: Color / Black Ink Cartridge Parameters Color / Photo Ink Cartridge Parameters • Black to Color • Photo to Color • Black to Color Vertical • Photo to Color Vertical • Black Bidirectional (Bidi) Alignment • Photo
Resumen del contenido incluido en la página 18
Horizontal -50 -40 -30 -20 -10 0 +10 +20 +30 +40 +50 Rimage 480i Printer Centering the image on the disc The Rimage 2000i provides two ways to center the image on the disc. You can use the Auto Centering method or the Manual Centering method. This process describes both processes. The Auto Centering method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy with the manual centering adjustment to better than +/- 0.2 mm. For optimal print quality, use this
Resumen del contenido incluido en la página 19
Operate the Rimage 480i Printer Cleaning the ink cartridge nozzles Tip: For additional This functionality allows you to clean or open the ink cartridge information about nozzles. The nozzles may become clogged from dried ink causing these features, access poor print because one or more nozzles are not spraying the the online help in appropriate quantity of ink. Printing Preferences. 1. Navigate to Printing Preferences. 2. Select the Services tab. Tip: If the cartridge has
Resumen del contenido incluido en la página 20
Rimage 480i Printer Learn More Safety information This manual and the indications on the product allow proper and safe operation. The indication marks below help protect you and other persons from injury, and equipment from damage. Warning! Ignoring this symbol failing to take or avoid a specific action could result in physical harm to the user or the hardware. Caution: Ignoring this symbol could result in loss of data or incorrect operation of the hardware. To ensure safety, p
