Resumen del contenido incluido en la página 1
SecureStack C2
PoE Redundant Power Supply
C2RPS-POE
Installation Guide
Caution: Do not use this product with SecureStack C2 non-PoE devices.
Any SecureStack C2 device without a “P” suffix in the model number
(C2xxxx-xx) indicates a SecureStack C2 PoE non-compliant device and is not
compatible with this power system.
Precaución: La fuente de poder C2RPS-POE no es compatible con
switches SecureStack C2 que no cumplan con el estándar PoE. No intente
conectar el cable de corrien
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Electrical Hazard: Only qualified personnel should perform installation procedures. Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion. Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden. Notice EnterasysNetworks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases
Resumen del contenido incluido en la página 4
Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules.
Resumen del contenido incluido en la página 5
Electromagnetic Compatibility (EMC) This product complies with the following: 47 CFR Parts 2 and 15, CSA C108.8, 89/336/EEC, EN55022, EN61000‐3‐2, EN61000‐3‐3, EN55024, AS/NZSCISPR 22, VCCIV‐3. Compatibilidad Electromágnetica (EMC) Este producto de Enterasys cumple con lo siguiente: 47CFR Partes 2 y 15, CSA C108.8, 89/336/EEC, EN55022, EN55024, EN61000‐3‐2, EN61000‐3‐3, AS/NZSCISPR 22, VCCIV‐3. Elektro- magnetische Kompatibilität ( EMC ) Dieses Produkt entspricht den folgenden Richtlinien: 4
Resumen del contenido incluido en la página 6
Declaration of Conformity Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: EnterasysNetworks,Inc. Manufacturer’s Address: 50 Minuteman Road Andover, MA 01810 USA European Representative Address: EnterasysNetworks, Ltd. Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EN 55022 EN 61000‐3‐2 EN 61000‐3‐3 EN 55024 EC Directive 73/23/EEC EN 60950 Equipment Type/Envir
Resumen del contenido incluido en la página 7
Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between the end user (“You”) and EnterasysNetworks,Inc. on behalf of itself and its Affiliates (as hereinafter defined) (“Enterasys”) that sets forth Your rights and obligations with respect to the Enterasys software program/firmware installed on the Enterasys product (including any accompanying documentation,
Resumen del contenido incluido en la página 8
3. APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and federal courts of the Commonwealth of Massachusetts without regard to its conflicts of laws provisions. You accept the personal jurisdiction and venue of the Commonwealth of Massachusetts courts. None of the 1980 United Nations Convention on Contracts for the International Sale of Goods, the United Nations Convention on the Limitation Period in the International Sale of Goods, and the Unif
Resumen del contenido incluido en la página 9
8. AUDIT RIGHTS. You hereby acknowledge that the intellectual property rights associated with the Program are of critical value to Enterasys and, accordingly, You hereby agree tomaintain complete books, records and accounts showing (i) license fees due and paid, and (ii) the use, copying and deployment of the Program. You also grant to Enterasys and its authorized representatives, upon reasonable notice, the right toaudit and examine during Your normal business hours, Your books, records, ac
Resumen del contenido incluido en la página 10
viii
Resumen del contenido incluido en la página 11
Contents About this Guide Using This Guide ................................................................................................................................. xi Structure of This Guide ........................................................................................................................ xi Using the SecureStack C2 Manual Set ............................................................................................... xii Conventions Used in This Guide .........
Resumen del contenido incluido en la página 12
Tables 1-1 Powered Device (PD) PoE Power Classifications..................................................................1-3 2-1 Contents of N-POE Chassis Carton.......................................................................................2-2 2-2 C2RPS-POE Status LED Indications and Recommended Actions........................................2-7 A-1 C2RPS-POE Specifications .................................................................................................. A-1 A-2 C2RPS-P
Resumen del contenido incluido en la página 13
About this Guide This guide provides an overview, installation and troubleshooting instructions, and specifications for the Enterasys SecureStack C2RPS‐POE power supply, which can provide a redundant power source to a SecureStack standalone POE switch. Using This Guide Read through this guide completely to familiarize yourself with its contents and gain an understanding of the features and capabilities of the C2RPS‐POE power supply. A general working knowledge of data communications networks
Resumen del contenido incluido en la página 14
Using the SecureStack C2 Manual Set Using the SecureStack C2 Manual Set Other manuals have been developed for the SecureStack C2 PoE switch devices that can be connected to the C2RPS‐POE power supply for power redundancy. Caution: The C2RPS-POE power supply does not support non-PoE compliant SecureStack C2 switches. Do not try to connect the power cable from this C2RPS-POE power supply to any SecureStack C2 stackable switch that does not have a “P” suffix in the model name, such as C2G124-24
Resumen del contenido incluido en la página 15
Conventions Used in This Guide Conventions Used in This Guide The following conventions are used in this guide: Note: Calls the reader’s attention to any item of information that may be of special importance. Caution: Contains information essential to avoid damage to the equipment. Precaución: Contiene información esencial para prevenir dañar el equipo. Achtung: Verweißt auf wichtige Informationen zum Schutz gegen Beschädigungen. Electrical Hazard: Warns against an action that could result in
Resumen del contenido incluido en la página 16
Conventions Used in This Guide xiv About this Guide
Resumen del contenido incluido en la página 17
1 Introduction This chapter provides the following information: For information about... Refer to page... C2RPS-POE Overview 1-2 C2RPS-POE Status LED 1-2 Power Classifications and Deployment 1-2 Getting Help 1-4 SecureStack C2 Installation Guide 1-1
Resumen del contenido incluido en la página 18
C2RPS-POE Overview C2RPS-POE Overview The purpose of the C2RPS‐POE is to provide power backup to an Enterasys SecureStack C2 PoE‐compliant stackable switch. If for some reason the switch looses power from its internal power supply, the C2RPS‐POE can provide up to 500 Watts maximum operating power to support switch operation and the 48Vdc cessary to support 48 Vdc/data connections to PDs (Powered Devices). The C2RPS‐POE is shown in Figure1‐1. Figure 1-1 SecureStack C2RPS-POE (front and rear
Resumen del contenido incluido en la página 19
Power Classifications and Deployment The number of PDs that can be supported by the connected SecureStack PoE switch can be estimated by adding up the maximum power requirement of each connected PD according to their Power Classification rating (0 through 4). Note: Use the highest power rating of PoE Power Class of each PD to calculate the maximum wattage. For example, such as 12.95 for a Class 0 device. Table 1-1 Powered Device (PD) PoE Power Classifications PD Maximum Power Class Usage Ra
Resumen del contenido incluido en la página 20
Getting Help The SecureStack PoE switch has six of its PoE/data ports connected to PDs with the following Class ratings: •One does not support PoE (no power) •One has no Class rating (Defaults to Class 0, 12.95 Watts maximum) •Two are Class 2 (6.49 Watts maximum x 2 = 12.98 Watts total) •One is Class 0 (12.95 Watts maximum) •One is Class 4 (defaults to 12.95 Watts maximum) The maximum power needed from the C2RPS‐POE is 51.83 Watts for the PDs, which is far below the maximum of 370 Watts. Gett
