Manual de instrucciones de Tripp Lite SmartPro SMART1000RM1U

Resumen del contenido incluido en la página 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART1000RM1U
SmartPro Rackmount UPS - Line interactive, sine wave UPS with integrated switched PDU and current
monitoring

Highlights
1000VA / 1kVA line interactive 1U rackmount UPS
Maintains sine-wave 120V nominal output over an input range of 83 to 147V
Network communications supported via USB port, serial port, SNMP/Web card
slot and EPO interface
Current monitoring

Resumen del contenido incluido en la página 2

severity and reduces overvoltages by 12% Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperatur

Resumen del contenido incluido en la página 3

Battery recharge rate 2-4 hours to 90% Replacement RBC69-1U Battery Cartridge VOLTAGE REGULATION Voltage regulation Line interactive voltage regulation system corrects input voltages between 83 and 147 back to usable 120V nominal description levels. Overvoltage Input voltages between 128 and 147 are reduced by 12% correction Brownout correction Input voltages between 83 and 107 are boosted by 14% LEDS ALARMS & SWITCHES Front panel LEDs 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE

Resumen del contenido incluido en la página 4

Battery mode 189.2 BTU/hr. (Max.) COMMUNICATIONS Network monitoring Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line port voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status Software and Includes PowerAlert UPS monitoring software for network and standalone operating systems. Ships with complete USB cabling included and DB9 cabling. SNMP compat

Resumen del contenido incluido en la página 5

Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional] DNET1 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional] DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines Qty: [optional] USB Hubs/Accessories U022-010 USB Cable - 10-ft. USB 2.0 AB Gold Device Cable Qty: [optional] More information, including related products, owner's manuals, and additional techni