Manual de instrucciones de Paxar Pizza Hut TC941XPHSG

Resumen del contenido incluido en la página 1

*Setting Up the System
Caution
Do not touch the electrical connectors while setting up the printer. Electrostatic discharge can damage or
destroy the printhead or electronic components.
ALWAYS PLUG THE PRINTER INTO THE ELECTRICAL WALL OUTLET FIRST AND THEN TURN ON
THE PRINTER – NEVER TURN ON THE PRINTER AND THEN PLUG IT INTO THE WALL OUTLET.

Adhesive Feet
Follow these instructions to setup the printer,
keypad/terminal, and power supply in the tray.
1. Remove the tray and check inside

Resumen del contenido incluido en la página 2

The keypad/terminal should not be operated in a location that has room temperatures above 158 ° F or below -4 ° F for extended periods of time. This could permanently damage the display. Make sure the printer’s power supply is not accidentally connected to the keypad/terminal. 11. Plug the L-shaped connector into the socket located on the top of the keypad/terminal (12V). L-shaped 12. Connect the serial cable to the top of the keypad/terminal. Connector Serial 13. Place the printer i