Resumen del contenido incluido en la página 1
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-T70M (XGA)
TLP-T71M (XGA / With Document Camera)
TLP-T60M (XGA)
TLP-T61M (XGA / With Document Camera)
TLP-S70 (SVGA)
TLP-S71 (SVGA / With Document Camera)
TLP-S40 (SVGA)
TLP-S41 (SVGA / With Document Camera)
TLP-T70M / T60M / TLP-S70/TLP-S40
Others Maintenance Operations Preparations Before Using
Resumen del contenido incluido en la página 2
Before Using SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol, within CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND an equilateral triangle, is intended to alert the user INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE to the presence of uninsulated "dangerous voltage" MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE within the product's enclosure that may be of REFERENCE. sufficient magnitude to constitute a risk of electric This set has been
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS (Continued) 5. Heat 8. Power-Cord Protection 11. Object and Liquid Entry 14. Attachments The product should be situated Power-supply cords should be Never push objects of any kind Do not use attachments not away from heat sources such as routed so that they are not likely to into this product through openings recommended by the product radiators, heat registers, stoves, or be walked on or pinched by items as they may touch dangerous manufacturer as they may cause o
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) 16. Damage Requiring Service 18. Servicing 21. Do not leave thermal- Unplug this product from the wall Do not attempt to service this paper documents or easily outlet and refer servicing to product yourself as opening or deformed items on top of qualified service personnel under removing covers may expose you the unit or near the air the following conditions: to dangerous voltage or other exhaust for long periods a) When the power-supply cord or hazards
Resumen del contenido incluido en la página 5
LABEL LOCATIONS POWER SUPPLY CORD SELECTION MODEL NO. / If your line voltage is 220 to 240V, use one of the following types of cable. RATING Label WARNING Label Plug Plug configuration Plug type Line voltage configuration Plug type Line voltage Australian 200 – 240V EURO 220 – 240V 240V 10A Switzerland 200 – 240V SERIAL NO. Label UK 220 – 240V MANUFACTURED; 240V SERIAL NO. 6A Use a 5A fuse which is approved by ASTA CAUTION Label North American 200 – 240V WARNING Label or BSI to BSI362. 240V Alw
Resumen del contenido incluido en la página 6
IMPORTANT PRECAUTIONS (Continued) EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural Avoid Volatile Liquid disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or operating by third parties, other accidents, or use under abnormal conditions including plastic products touching the unit for a long time. They will leav
Resumen del contenido incluido en la página 7
CONTENTS Before Using Mainenance SAFETY PRECAUTIONS ................................................................................ 2 Air filter cleaning ............................................................................................ 39 IMPORTANT SAFETY INSTRUCTIONS ......................................................... 3 Lens and main unit cleaning .......................................................................... 40 LABEL LOCATIONS .....................................
Resumen del contenido incluido en la página 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If (5) (4) (3) (2) (1) (12) (11) any item is missing, please contact the store immediately where you purchased the product. (5) (1) (6) (11) (10) (6) (9) (*1) (12) (2) (7) (14) (6) (7) (8) (13) (1) (14)(15)(16) ( (17)(18)(19)(20)(21)(22) 3) (8) COMPUTER- VIDEO AUDIO MONITOR ( Y/PB/PR ) VIDEO S-VIDEO CONTROL (4) (9) (13) (
Resumen del contenido incluido en la página 9
Names of each part on the control panel and remote control Names of each part on the document camera (models with a document camera) Control panel Remote Control (4) (1) (12) CLASS 1 LED PRODUCT (13) Remote control transmitter (2) ON/ STANDBY CALL (8) (1) (15) (3) (7) KEYSTONE AUTO SET (3) (4) (11) (7) (8) (9) (10) MUTE FREEZE (5) (12) (11) (10) FAN TEMP LAMP ON RESIZE INPUT ON / STANDBY (13) (9) (6) (8) (2) ZOOM + (1) CANCEL (14) INPUT MENU (2) (6) ZOOM + Name : Function VOL. - VOL. + (5) (1) C
Resumen del contenido incluido en la página 10
Approx. 5m Approx. 5m Preparing and using the remote control Placement Loading dry-cell batteries Operating the remote Placement Styles into the remote control control As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the placement style in the q Remove the battery cover. Point the remote control toward the p.32 default setting menu , in accordance with your needs. projector’s infrared remote sensor, and p
Resumen del contenido incluido en la página 11
Placement (Continued) Connection Projection Distance and Screen Size (with optical zooming) Before connection Use the figures, tables, and formulas below to determine the screen size and projection • Read the owner’s manual of the device to connect to the projector. distance. (Screen sizes are approximate values for full-size picture with no keystone adjust- • Some types of computer cannot be used or connected to this projector. ment) p.46 Check for an RGB output terminal, supported signal , etc
Resumen del contenido incluido en la página 12
Operations Turning the power on and off Connecting the power cord Turning the power off Insert the power cord connector into the AC IN socket of the projector. 1 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This Insert the power cord plug into a wall or other power outlet. 2 message will disappear after a moment. (This operation is no longer valid after the When the power cord is plugged in, the following message disappears.) th
Resumen del contenido incluido en la página 13
Basic operations 5 Turn on the power. Projector placement angle adjustments 1 p.22 Turn on the power by following the instructions in “Turning on the power” . The placement angle and the height of the projected image can be adjusted by the foot adjuster. 2 Select the language and the lamp power (When using the 1 q Lift up the front of the projector to first time). the desired angle, then press the foot adjuster release button. When the projector is used for the first time after purchase, menu fo
Resumen del contenido incluido en la página 14
Using handy features Using auto setting (Auto setting) Correcting the keystone distortion (Keystone) p.25 This function sets up the projector to the optimum state for When the foot adjuster is used to change the Remote Remote Control panel each type of the input signal by using simple operations. Control projection angle, the picture will undergo keystone (trap- Control panel Control FAN TEMP LAMP ON ON/ STANDBY CALL FAN TEMP LAMP ON ON/ ezoidal) distortion. CALL STANDBY 1 Press the AUTO SET bu
Resumen del contenido incluido en la página 15
Using handy features (Continued) 2 Press the ZOOM + button to bring it back to the original size. Enlarging the picture size (Resize) Each time the ZOOM + button is pressed, the image size increases. The image being projected can be enlarged. (You cannot make it larger than the original size.) 1 Press the remote control’s RESIZE button. The enlargement ratio is increased each time the RESIZE button is pressed. 2 To decrease the enlargement ratio, press the remote control’s Notes RESIZE button
Resumen del contenido incluido en la página 16
Using handy features (Continued) Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using Displaying Information [Status display] p.16 the operation buttons on the control panel (main unit side) and remote control. This displays information about the input signal, lamp use time, etc. Press the button twice (or press the CALL button on the remote How to use the menus control once). The menu shown below is only for operation instructions and might b
Resumen del contenido incluido en la página 17
Using the menu (Continued) The display setting menu The image adjustment menu Use this menu to adjust image-related items. Use this menu to set screen display-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Description Item Item Description Computer Y/PB/PR Video S-video Camera Screen size Contrast Lower Higher Yes Yes Yes Yes Yes (Full): Display with LCD panel’s resolution Brightness Darker Brighter Yes Yes Yes Yes Yes (Thru):
Resumen del contenido incluido en la página 18
Using the document camera Please read this chapter if the model you purchased includes a document camera. Preparation of the document camera (when loading the camera) Uninstalling the camera Status before preparation 1) Set up arm 2) Extend arm (When stowed) 1) Place the folded document 2) Slide the connect lever in 3) Pressing the lock lever in camera with the bottom the direction of an arrow. the direction of an arrow, side up. slide the document camera. 3) Rotate arm 4) Raise camera head Inst
Resumen del contenido incluido en la página 19
Using the document camera (Continued) 5 Adjust the focus using the focus ring on the camera head Image projection with the document camera Rotate the focus ring to either NEAR or FAR, whichever is better in focusing. 1 Place the document. Set the document at the top of or the side of the projector. Turn the focusing ring to adjust the focus. • Near : 100 mm to 300 mm Far : 300 mm to 5 m 6 If the screen is too dark or too bright, use the CAMERA GAIN (+/–) buttons to make it easier to see. 2 Press
Resumen del contenido incluido en la página 20
Maintenance Using the document camera (Continued) Air filter cleaning The air filter prevents dust and debris from getting inside the projector. Never run the Locking the white balance projector with the filter removed. It is recommended that the air filter is cleaned regularly. Although the projector’s camera is constantly adjusting the color balance of the images • The icon message “Check the air filter for dirt.” is displayed every 100 hours. (If the it photographs, the color balance may be
