Resumen del contenido incluido en la página 1
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright January, 2007
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifica
Resumen del contenido incluido en la página 2
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Important Safety Information Congratulations on purchasing the DLP projector! Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you
Resumen del contenido incluido en la página 3
Preface Preface Preface Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” on page 30 for clear and safe instructions for this procedure. Before replacing the lamp:
Resumen del contenido incluido en la página 4
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Main Features • Lightweight unit, easy to pack away and transport • Compatible with all major video standards including NTSC, PAL, and SECAM • A high brightness rating allows for presentations in daylight or in lit rooms • Supports resolutions up to SXGA at 16.7 million colors to deliver crisp, clear images • Flexible setup allows for front and rear projections • Line-of-vision projections remain square
Resumen del contenido incluido en la página 5
Preface Preface Preface Table of contents GETTING STARTED .......................................................................................................................................................... 1 PACKING CHECKLIST........................................................................................................................................................... 1 VIEWS OF PROJECTOR PARTS.............................................................................
Resumen del contenido incluido en la página 6
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Projection distance and size table (0.7 inches)............................................................................................................. 40 TIMING MODE TABLE........................................................................................................................................................ 41 PROJECTOR DIMENSIONS .........................................................
Resumen del contenido incluido en la página 7
GETTING STARTED Packing Checklist Carefully unpack the projector and check that the following items are included: DLP PROJECTOR REMOTE CONTROL (WITH TWO AAA BATTERIES) USB CABLE POWER CORD COMPUTER CABLE (VGA-VGA) CD-ROM (THIS USER’S MANUAL) QUICK START GUIDE Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not operate normally. Caution: Avoid using the projector in dusty environments. Note: It is recommend that
Resumen del contenido incluido en la página 8
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Views of Projector Parts Front-right View ITEM LABEL DESCRIPTION SEE PAGE: 1. Focus Focuses the projected image 15 Lens zoom Enlarges the projected image 2. 15 3. Screws Secure lamp cover 15 4. See “Top view—OSD buttons and LEDs” 3 Front IR receiver Receiver for IR signal from remote control 5. 15 6. Lens Slide lens cap before use 7. Lens cover Slide across to protect lens when not in use
Resumen del contenido incluido en la página 9
DLP Projector – User’s Manual DLP Projector – User’s Manual DLP Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs ITEM LABEL DESCRIPTION SEE PAGE: Keystone/ Corrects image-trapezoid (wider bottom) effect 1. 16 Down cursor Navigates and changes settings in the OSD VOL-/ Decreases volume 2. 16 Left cursor Navigates and changes settings in the OSD Orange Lamp ready—you can safely turn on or off the projector Ready LED 3. Flashing Lamp not ready—do not p
Resumen del contenido incluido en la página 10
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Rear view 1 2 3 4 5 6 1 3 4 5 6 16 15 14 13 12 11 10 9 8 7 16 15 14 11 10 9 8 7 ITEM LABEL DESCRIPTION SEE PAGE: Rear IR receiver Receiver for IR signal from remote control 1. 8 DVI-D Connect the computer cable from a computer (Optional) 2. 10 3. VGA IN Connect a VGA cable (supplied) from a computer VGA OUT Connect to a monitor 4. Connect the composite or S-video cable (not supplied) from S-vide
Resumen del contenido incluido en la página 11
DLP Projector – User’s Manual DLP Projector – User’s Manual DLP Projector – User’s Manual Bottom view ITEM LABEL DESCRIPTION SEE PAGE: Contact your dealer for information on mounting the projector on a Ceiling support holes 1. ceiling. Height adjuster button Push to release height adjuster 2. Adjuster drops down when adjuster button is Height adjuster 14 3. pushed Tilt adjuster Adjust angle of the picture 4. – 5 –
Resumen del contenido incluido en la página 12
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path be- tween the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces su
Resumen del contenido incluido en la página 13
DLP Projector – User’s Manual DLP Projector – User’s Manual DLP Projector – User’s Manual ITEM LABEL DESCRIPTION SEE PAGE: Right Right arrow when connected through USB to a PC 5. Down Down arrow when connected through USB to a PC 6. Page Down Page down when connected through USB to a PC 7. Up cursor 8. Right cursor Navigates and changes settings in the OSD 9. 16 Down cursor 10. Volume +/- Adjusts volume 11. 15 Mute Mutes the built-in speaker 12. Zoom+ Zoom in 13.
Resumen del contenido incluido en la página 14
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote control perpendicular to the sides or the rear of the projector, the remote control functions within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. If the pro
Resumen del contenido incluido en la página 15
SETUP AND OPERATION Inserting the Remote Control Batteries Remove the battery compartment cover 1. by sliding the cover in the direction of the arrow. Insert the supplied batteries taking note 2. of the polarity (+/-) as shown here. Replace the cover. 3. Caution: 1. Only use AAA batteries (Alkaline batteries are recommended). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the projector for prolonged pe
Resumen del contenido incluido en la página 16
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Connecting Input Devices A PC or notebook computer as well as video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector. ITEM LABEL DESCRIPTION Rear IR Receiver for IR signal from remote co
Resumen del contenido incluido en la página 17
DLP Projector – User’s Manual DLP Projector – User’s Manual DLP Projector – User’s Manual Starting and Shutting nd Shutting do down t wn th he Pr e Proje ojec ct tor or Slide the lens cover. 1. 1. Connect the power cord to the projector (A). 2. Connect the other end to a wall outlet. Switch (B) from off (O) to on (-). The Power and Ready LEDs on the projector 3. light. Turn on the connected devices. Ensure the Ready LED is on a steady (not 4. flashing) orange and then press
Resumen del contenido incluido en la página 18
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Turn off the main Power switch when the 8. Ready LED stops flashing. Caution: Do not unplug the power cord until the Ready LED stops flashing, indicating the projector has cooled down. – 12 –
Resumen del contenido incluido en la página 19
DLP Projector – User’s Manual DLP Projector – User’s Manual DLP Projector – User’s Manual Setting an Access Password (Security Lock) You can use the cursor (arrow) buttons to set a password and prevent unauthorized use of the pro- jector. When enabled, the password must be entered after you power on the projector. (See “Navigating the OSD” on page 16 and “Setting the OSD Language” on page 17 for help on using OSD menus.) Important: Keep the password in a safe place. Without the password,
Resumen del contenido incluido en la página 20
DLP Projector—User’s Manual DLP Projector—User’s Manual DLP Projector—User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or stand should be level and sturdy. • Position the projector so that it is perpendicular to the screen. • Be sure cables are not in the way or can cause the projector to be knocked over. To raise the level of the projector, lift the projector [A] and press the height-adjuster 1. button [B]
