Resumen del contenido incluido en la página 1
ENGLISH FRANÇAIS ESPAÑOL
77-20SRLXI10020
Z
-
SR LX5i
Hi-Fi Table Radio
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL USUARIO
Resumen del contenido incluido en la página 2
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type CAUTION: TO REDUCE THE RISK OF plug has two blades and a third ELECTRIC SHOCK, DO NOT REMOVE grounding prong. The wide blade or the COVER (OR BACK). NO USER- third prong are provided for your safety. SERVICEABLE PARTS INSIDE. REFER If the provided plug does not fit into SERVICING TO QUALIFIED SERVICE your outlet, consult an electrician for P
Resumen del contenido incluido en la página 3
ENGLISH < The apparatus draws nominal non- WARNING: TO PREVENT FIRE operating power from the AC outlet OR SHOCK HAZARD, DO NOT with its STANDBY/ON switch in the EXPOSE THIS APPLIANCE TO standby position. RAIN OR MOISTURE. < The apparatus should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any For U.S.A. time. < The main plug is used as the disconnect This equipment has been tested and device, the disconnect device shall found to comply with the li
Resumen del contenido incluido en la página 4
Contents Before Using the Unit Thank you for choosing TEAC. Read this Read this before attempting any manual carefully to get the best operations. performance from this unit. < As the unit may become warm during operation, always leave sufficient space Before Using the Unit . . . . . . . . . . . . . . . . 4 around the unit for ventilation. Remote Control Unit. . . . . . . . . . . . . . . . . 5 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 < The voltage supplied to the unit shou
Resumen del contenido incluido en la página 5
ENGLISH Remote Control Unit Display The provided Remote Control Unit allows A B C D E F the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles K J I H G between the unit and the remote control. < If the remote control unit is operated near A Lights when the DBS
Resumen del contenido incluido en la página 6
Unit Functions A B C D E F G H I J K L M K A STANDBY/ON Use this button to turn the unit on or standby. A C B VOLUME E Press these buttons to adjust the volume level. N D O C SLEEP B Use this button to set sleep timer. G D FM MODE/VIDEO OUT I B In FM TUNER mode, use this button to select stereo or monaural. S In iPod mode, use this button to turn on P or off video output to a connected TV Q T set. R E FUNCTION Use these buttons to select the source you want to listen to. 6
Resumen del contenido incluido en la página 7
ENGLISH F N DIMMER/SNOOZE MUTING Use this button to dim the display. Use this button to mute the sound. After the TIMER ON time is reached, use this button to turn the unit off for 10 O MEMORY minutes. In TUNER mode, use this button to preset stations. G TUNING MODE/Play/Pause (y/J) In TUNER mode, use this button to select P PRESET/SCROLL (‡/°) preset tuning. In TUNER mode, use these buttons to When you select preset tuning, PRESET select a preset station. indicator appears on the display. In iP
Resumen del contenido incluido en la página 8
Connections CAUTION: < Switch off the power before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords. SR-LX5i B A F C D E Connect either Connect either one of these cables one of these cables TV S-VIDEO VIDEO IN IN AC wall socket G 12 8
Resumen del contenido incluido en la página 9
ENGLISH A F AM loop antenna DC IN jack Connect the supplied AM loop antenna Connect the provided AC adapter to to the AM ANTENNA terminal. this jack. Then connect the AC Place the antenna on a shelf or hang it adapter’s plug to the AC wall socket. on a window frame, etc., in the < Do not use any AC adapters other than direction which gives the best the one included with this unit to avoid reception. fire, electric shock, etc. Be sure to If you want, you can hook the AM connect the adapter to an
Resumen del contenido incluido en la página 10
Getting Started The SR-LX5i comes mounted with an Docking an iPod to this system adapter “60GB (color) + Photo 40/60GB”. iPod video output To play your iPod through the SR-LX5i, you Make the following settings on your have first to check if the factory mounted iPod’s menu to output video to a TV via adapter fits your model of iPod. If it does this system’s dock. not, you have to replace it with a correct In the [Video] menu, select [Video one, as explained below. Settings]. Set [TV OUT] to [On]
Resumen del contenido incluido en la página 11
ENGLISH Setting the Clock 4 Press the Skip buttons (.//) to set the current minute, and then press the CLOCK ADJ button. The clock starts from 00 second. .// CLOCK ADJ 5 Press the Skip buttons (.//) to 1 Press and hold the CLOCK ADJ button select Year, and then press the for more than 3 seconds and release CLOCK ADJ button. it. “12 HR” or “24 HR” blinks on the display. If you want to change the hour mode, press the . or / button. 6 Press the Skip buttons (.//) to select Date, and then press the
Resumen del contenido incluido en la página 12
Basic Operation 3 Play the source, and adjust the volume using the VOLUME buttons (–/+). 1 3 2 The volume is adjustable from MIN (00) 1 Press the STANDBY/ON switch to to MAX (40). Hold down the VOLUME – turn the unit on. or + buttons to turn down or up the volume continuously. < The unit turns on with the source that was last selected. If the iPod that is in playback mode is inserted into the Dock, the SR-LX5i will automatically turn on Dimmer and start playback of the iPod. < You can also use
Resumen del contenido incluido en la página 13
ENGLISH Muting Sleep Timer To mute the sound temporarily, press the You can set a sleep timer so the unit MUTING button. Press the MUTING turns itself off after a specified time. button again to restore the sound. Press the SLEEP button repeatedly until desired time appears on the display. < If you change the volume or source during the muting, the muting will be canceled. Headphones SLEEP 90, 60 or 30: The power will be switched to standby 90, 60 or 30 minutes later. OFF: The sleep timer is
Resumen del contenido incluido en la página 14
Listening to iPod Insert the iPod into the Dock of the To select iPod mode SR-LX5i. Then push the Play/Pause button (y/J) on the iPod or the SR-LX5i. The SR-LX5i Select “iPod” using the FUNCTION will automatically turn on and start button or the “iPod” button of the playback from the iPod’s music list. remote control unit. If an iPod is already docked, playback will start. < Make sure to use an appropriate Dock adapter (see the separate sheet). When no iPod is docked, the iPod indicator on the
Resumen del contenido incluido en la página 15
ENGLISH Operating iPod 1 VIDEO OUT A B C A To suspend playback temporarily C To skip to the next or a previous (pause mode) track Press the Play/Pause button (G /J ) during playback. Playback stops at the During playback, repeatedly press the current position. To resume playback, Skip button (.or/) until the press the Play/Pause button (G/J) again. desired track is found. The selected track will be played from the beginning. < When the . button is pressed during B Search for a part of a track pl
Resumen del contenido incluido en la página 16
Operating iPod 2 To go back to the previous To activate the repeat mode menu During playback, press the REPEAT button to change the repeat mode. Press the MENU button. This button Each time the REPEAT button is pressed, works with the same functions as its iPod the REPEAT setting of iPod is changed as counterpart. follows: One All off Select the menu item If the iPod is set to repeat one song, the repeat Once icon ( ) appears in the iPod’s display. If the iPod is set to repeat all songs, the rep
Resumen del contenido incluido en la página 17
ENGLISH Listening to an External Source 1 3 Connect the PHONES jack (audio Play the source, and adjust the output jack) of a portable audio volume of both the SR-LX5i and the player to the AUX IN jack of the SR- audio player. LX5i using the supplied stereo mini plug cable. When using the PHONES jack of your mini player, you must adjust the volume of the mini-player or you may hear no sound from your SR-LX5i. You can use this way of connection to listen to an iPod that has no Dock < Turning the v
Resumen del contenido incluido en la página 18
Listening to the Radio If the reception is poor For the best reception, rotate the FM or the AM antenna until you get stations clearly. 1 2 FM MODE button Pressing this button alternates between 1 Select “FM” or “AM” using the Stereo mode and Mono mode. FUNCTION button. 2 Select the station you want to listen to (auto selection). Stereo FM stereo broadcasts are received in Hold down the Skip button (.or/) stereo and the “STEREO” indicator lights for more than 2 seconds and release it in the disp
Resumen del contenido incluido en la página 19
ENGLISH Preset Tuning You can program 10 FM & 10 AM channel How to select a preset station presets. 1 Press the TUNING MODE button to display the “PRESET” indicator in the 1 Tune in a station you want to listen display. to (see page 18). 2 Press the MEMORY button. < While “PRESET” displays in the display, 3 Within 10 seconds, select a preset the SR-LX5i is in the preset tuning mode. channel to store the station using the PRESET/SCROLL (‡/°) button. 2 To select FM or AM, press the TUNER (FM/AM)
Resumen del contenido incluido en la página 20
Timer 2 Press the Skip buttons (. or /) to set the hour, and then press the ALARM 1 or ALARM 2 button. .// ALARM 1, ALARM 2 3 Press the Skip buttons (. or /) to set the minute, and then press the < The unit can be programmed to turn on ALARM 1 or ALARM 2 button. at a specified time. The unit will Standby after 120 minutes of reaching the specified time. < The unit can be set two different timer setting separately. < Adjust the clock before setting the timer (see page 11). 4 Select a source using
