Resumen del contenido incluido en la página 1
®
HS4000TW Series
High-Security Camera Enclosure
Installation/Operation Manual
C492M-D (1/96)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.pelco.com
(800) 289-9100 or (1-559) 292-1981 • FAX (800) 289-9150 or (1-559) 292-3827
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Section Page 1.0 WARNINGS ........................................................................................................................................1 2.0 SCOPE ...............................................................................................................................................2 3.0 DESCRIPTION ...................................................................................................................................2 3.1 MODELS ...
Resumen del contenido incluido en la página 3
INSTALLATION/OPERATION MANUAL HS4000TW SERIES HIGH-SECURITY CAMERA ENCLOSURES 1.0 WARNINGS Prior to installation and use of this product, the following 4. The installation method and materials should be WARNINGS should be observed. capable of supporting four (4) times the weight of the enclosure, pan/tilt, camera and lens combination. 1. Installation and servicing should only be done by Qualified Service Personnel and conform to all 5. The camera and lens combination shall not exceed Local code
Resumen del contenido incluido en la página 4
2.0 SCOPE 3.1 MODELS The information within this manual covers the installa- HS4000TWS High security ceiling/wall enclo- tion of the HS4000TW Series High Security Camera sure with tilt down, straight Enclosure. viewing angle constructed of heavy gauge steel, designed for Please thoroughly familiarize yourself with the infor- installations such as prisons, de- mation in this manual prior to installation and opera- tention cells, etc., requiring tion. maximum protection from van- dalism. (UL) 3.
Resumen del contenido incluido en la página 5
4.0 SPECIFICATIONS ELECTRICAL MECHANICAL Cable Entry: Two (2) cable knock-out holes on rear plate Window: 1/2" (1.27 cm) thick impact and abrasion resistant Lexan Tamper Switch: 1/4" (.63 cm) quick connect. N.O./N.C. clearly marked on Camera Mounting: Multiple holes on camera sled switch body. 10A, maximum switching current 125V, maxi- Maximum mum switching voltage. Camera/Lens Size: Accepts camera/lens combina- tions (including BNC connector) GENERAL up to: 15.0" L x 6.0" W x 4.75" H Construct
Resumen del contenido incluido en la página 6
5.0 INSTALLATION 5.2 TAMPER SWITCH INSTALLATION Before installing the HS4000TW Series enclosure in a The HS4000TW High-Security enclosures come wall or ceiling, make certain that the mounting surface stanmdard from the factory with a tamper switch is able to support the full weight of the enclosure plus mounted on the secure access cover. the camera and lens. Should it become necessary to install a replacement switch, reference Figure 2 and perform the following NOTE: The eight (8) fasteners
Resumen del contenido incluido en la página 7
6.0 CARE AND MAINTENANCE Maintenance performed at regularly scheduled inter- vals will help prolong the operational life and appear- ance of the equipment. Clean the Lexan window with a mild non-abra- sive detergent in water and a soft cloth regularly to help maintain picture clarity. For a heavily soiled window, use vinyl cleaner. NOTE: Pelco offers a 24-hour, seven-day-a week Technical Assistance Program (TAP) de- signed to assist any customer with a technical problem involving Pelco equipme
Resumen del contenido incluido en la página 8
7.0 EXPLODED ASSEMBLY DIAGRAM See Figure 3 for exploded assembly diagram of HS4000TW Series enclosure. Figure 3. HS4000TW Series Enclosure Exploded Assembly Diagram 8.0 MECHANICAL PARTS LIST FOR HS4000TW SERIES ENCLOSURE Item No. Qty Description Part Number 1 1 Window, Lexan, 5.75" x 4" x 0 .5", MR5 AH800010001 2 1 Weld Assembly (HS4000TWS) HS4000STR1000WA Weld Assembly (HS4000TWL) HS4000LFT1000WA Weld Assembly (HS4000TWR) HS4000RHT1000WA 3 2 Plate, Front/Rear HS40004003COMP 4 1 Sled EH401
Resumen del contenido incluido en la página 9
HS4000TW Mounting Template Pelco Manual C492M-D (1/96) 7
Resumen del contenido incluido en la página 10
(This page intentionally left blank.) 8 Pelco Manual C492M-D (1/96)
Resumen del contenido incluido en la página 11
9.0 WARRANTY AND RETURN INFORMATION WARRANTY RETURNS Pelco will repair or replace, without charge, any merchandise proved In order to expedite parts returned to the factory for repair or credit, please defective in material or workmanship for a period of one year after the date call the factory at (800) 289-9100 or (559) 292-1981 to obtain an of shipment. authorization number (CA number if returned for credit, and RA number Exceptions to this warranty are as noted below: if returned for repai
Resumen del contenido incluido en la página 12
® World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 United States Canda United Kingdom The Netherlands Sinapore Spain Scandanavia France Middle East | | | | | | | | 10 Pelco Manual C492M-D (1/96)
