Manual de instrucciones de Pelco PT780-24SL

Manual de instrucciones del aparato Pelco PT780-24SL

Aparato: Pelco PT780-24SL
Categoría: Aparato de seguridad
Fabricante: Pelco
Tamaño: 0.23 MB
Fecha de añadido: 6/15/2013
Número de páginas: 24
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Pelco PT780-24SL. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Pelco PT780-24SL.

Para tu comodidad

Si ver los manuales de instrucción de Pelco PT780-24SL directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Pelco PT780-24SL en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Pelco PT780-24SL a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Pelco PT780-24SL Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Pelco PT780-24SL, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Pelco PT780-24SL. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

®
PT780 Legacy Series
Pan/Tilts
Installation/
Operation Manual
C342M-D (8/05)
Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120

Resumen del contenido incluido en la página 2

CONTENTS Section Page 1.0 GENERAL ..................................................................................................5 1.1 IMPORTANT SAFEGUARDS AND WARNINGS ...............................5 2.0 DESCRIPTION ..........................................................................................6 2.1 MODELS ............................................................................................6 3.0 INSTALLATION .................................................................

Resumen del contenido incluido en la página 3

LIST OF ILLUSTRATIONS Figure Page 1 Removing the Screws ........................................................................8 2 Releasing the Covers ........................................................................8 3 Removing the Covers ........................................................................8 4 Hooking Cover Halves .......................................................................8 5 Tilt Limit Adjustment .........................................................

Resumen del contenido incluido en la página 4

(This page intentionally left blank.) 4 Pelco Manual C342M-D (8/05)

Resumen del contenido incluido en la página 5

1.0 GENERAL 1.1 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. The weight of the camera/lens and enclosure shall not exceed 40 lb (18.14 kg) with 12VDC pan/tilts or 52 lb (23.59 kg) with 24 VAC or 120 VAC pan/tilts. 3. Only use replacement parts recommended by Pelco. 4. After replacement/repair of this u

Resumen del contenido incluido en la página 6

2.0 DESCRIPTION ® The PT780 Legacy Series pan/tilt units are designed for medium, indoor/outdoor use. Only Legacy Series enclosures can be mounted on the pan/tilt units. These enclo- sures are the EH4700L and EH5700L environmental enclosures and the EH8106L TM pressurized enclosure. Pelco’s RediLINK connector makes it simple and quick for you to install an enclosure. The weight of the enclosure with camera and lens must not exceed 40 pounds (18.14 kg) with the 12 VDC pan/tilt units or 52 pounds

Resumen del contenido incluido en la página 7

3.0 INSTALLATION 3.1 MOUNTING NOTE: To insure proper wiring and Attach the pan/tilt unit to a wall or ceiling mount. Follow the instructions that are operation of your equipment, it is rec- provided with the mount. Make sure the mounting surface and the selected mount can support four times the combined weight of the pan/tilt unit and the camera ommended that you test the pan/tilt enclosure (including the camera and lens). The pan/tilt unit weighs approximately unit and associated equipment i

Resumen del contenido incluido en la página 8

3.2 PAN AND TILT LIMIT STOP ADJUSTMENTS 1. Remove the covers. a. Refer to Figure 1 and remove the Phillips screw on each side of the pan/ tilt unit. b. Refer to Figure 2 and place your hands under the cover halves. Exert a strong, upward force to release the covers from their internal latching devices. c. Refer to Figure 3 and pull the cover halves away from the pan/tilt unit. d. Set the covers down or hang them by the eyelets inside the covers (refer to Figure 4). The wire and hook on which to

Resumen del contenido incluido en la página 9

2. Adjust the tilt limit stops. CAUTION: Never remove the tilt limit stops. Refer to Figure 5 for the location of the tilt limit stops. The tilt limit stop closest to the front of the pan/tilt unit limits the downward movement. The tilt limit stop closest to the back of the pan/tilt unit limits the upward movement. These movements are reversed if the pan/tilt unit is installed upside down. Loosen the screw in the limit stop that you want to adjust. Position the limit stop in the desired locatio

Resumen del contenido incluido en la página 10

3.3 ENCLOSURE INSTALLATION Attach the camera enclosure to the pan/tilt unit. Follow the instructions that are provided with the enclosure. 3.4 ELECTRICAL INSTALLATION ® 3.4.1 LRD41 Series Legacy Receiver/Drivers Connect the 37-pin round connector from the pan/tilt unit to the mating connector on the receiver/driver. ® 3.4.2 All Control Equipment Except LRD41 Series Legacy Receiver/Drivers Make the interconnecting cable to link the 37-pin round connector from the pan/tilt unit to the control e

Resumen del contenido incluido en la página 11

Refer to Figure 9 and the following steps to construct the cable: 1. Slide the unshielded and coaxial cables through the cable shell and rubber boot. 2. Strip one inch of the jacket from the cables. 3. For the unshielded conductors, strip 1/8 inch of insulation from the individual wires. 4. For the coax, unwrap the braid and twist it into a single conductor. Strip 1/8 inch of insulation from the center conductor. If you are using two coax cables - one for video output and one for camera synchron

Resumen del contenido incluido en la página 12

Figure 10. Wiper On/Off Connection 12 Pelco Manual C342M-D (8/05)

Resumen del contenido incluido en la página 13

Table A-1. 37-Position Connector Pin Designations for Pan/Tilts with EH4700L and EH5700L Enclosures Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Video Signal/Ground • • • • 30/4 Sync Signal/Ground (B) (B) (B) (B) Unshielded Conductors 3 Left • • • • 7Right •• •• 6Up • • • • 5 Down • • • • 1 Common (A) (A) (A) (A) 8 Safety Ground • • • • 10 Iris (B) (B) (B) (B) 11 Fo

Resumen del contenido incluido en la página 14

Table A-2. 37-Position Connector Pin Designations for Pan/Tilts with EH8106L Enclosures Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP Coaxial Cable 27/4 Video Signal/Ground • • • • Unshielded Conductors 3 Left • • • • 7Right •• •• 6Up • • • • 5 Down • • • • 1 Common (A) (A) (A) (A) 8 Safety Ground • • • • 10 Iris (B) (B) (B) (B) 11 Focus • • • • 12 Zoom • • • • 9 Camera Power • • • •

Resumen del contenido incluido en la página 15

Table B. Requirements to Wire Power to Pan and Tilt Motors Maximum Cable Length* Wire Size 6 Conductors** 7 Conductors*** 5 Conductors**** 120 VAC PT780P Models 20 AWG 1,370 ft (417 m) 2,745 ft (836 m) 18 AWG 2,180 ft (664 m) 4,370 ft (1,331 m) 16 AWG 3,470 ft (1,057 m) 6,940 ft (2,115 m) 24 VAC PT780-24P Models 20 AWG 59 ft (17.98 m) 118 ft (35.96 m) 18 AWG 94 ft (28.65 m) 188 ft (57.30 m) 16 AWG 149 ft (45.41 m) 298 ft (90.83 m) 12 VDC PT780-VS Models 20 AWG 24 ft (7.3 m) 18 AWG 38 ft (11.

Resumen del contenido incluido en la página 16

Table C. Maximum Cable Distances Using RB24 or RB115 Relay Boxes Wire Size Maximum “A” Maximum “B” Distance Distance A B 20 AWG* 5,800 ft (1,768 m) 18 AWG 8,250 ft (2,515 m) Use Table B 16 AWG 13,000 ft (3,962 m) RELAY CONTROL * Not recommended for reliable service between control and relay box. BOX NOTE: Relay boxes can not be used with 12 VDC pan/tilts. REQUIRED EXTERNAL POWER SUPPLY 16 Pelco Manual C342M-D (8/05)

Resumen del contenido incluido en la página 17

Table D. Requirements to Wire Power to Camera Enclosure EH8106L: Power for the camera and heaters are separate. Refer to your camera manual for the camera wattage to determine the size of wire to use. Wire camera power through pins 9 and 14 of the 37-pin connector. The heaters use a total of 80 watts; wire through pins 15 and 16 of the 37-pin connector. EH4700L and EH5700L: To determine the wire gauge to use, add up the wattages for the different accessories inside your enclosure. CAUTION: T

Resumen del contenido incluido en la página 18

Table F. 24 VAC Wiring Distances Chart The following are the recommended maximum distances for 24 VAC applications and are calculated with a 10-percent voltage drop. (Ten percent is generally the maximum allowable voltage drop for AC-powered devices.) Wire Gauge EXAMPLE: An enclosure that re- quires 80 vA and is installed 35 feet 20 18 16 14 12 10 (10 m) from the transformer would 10 283 451 716 1142 1811 2880 require a minimum wire gauge of (86) (137) (218) (348) (551) (877) 20 Awg. 20 141 225

Resumen del contenido incluido en la página 19

4.0 OPERATION Refer to the manual for your control equipment for operating the pan/tilt unit. If your enclosure has the heater blanket option, it is thermostatically controlled to turn on at 40° F (4.44° C) and turn off at 60° F (15.56° C). The heater blanket allows operation of the pan/tilt unit to -50° F (-45.56° C). Pelco Manual C342M-D (8/05) 19

Resumen del contenido incluido en la página 20

5.0 MAINTENANCE If you need to remove the enclosure, protect the RediLINK™ connector area against moisture, dust, dirt, etc. Failure to do so could result in a bad connection. Also, damage to the pan/tilt unit or enclosure could occur when power is turned on. The following servicing should be done every six months with average use. 1. Remove the PT780’s outer casing. (Refer to step 1 under Section 3.2, PAN AND TILT STOP LIMIT ADJUSTMENTS.) 2. Inspect the gaskets around the cover, tilt shaft, an


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Pelco CC3701H-2X Manual de instrucciones Aparato de seguridad 36
2 Pelco EH8100 Manual de instrucciones Aparato de seguridad 7
3 Pelco CCC1390H Manual de instrucciones Aparato de seguridad 3
4 Pelco ESPRIT ES3012 Manual de instrucciones Aparato de seguridad 38
5 Pelco Camclosure IP110 Manual de instrucciones Aparato de seguridad 9
6 Pelco ESPRIT ES30C Manual de instrucciones Aparato de seguridad 16
7 Pelco ESPRIT ES31C Manual de instrucciones Aparato de seguridad 14
8 Pelco C458M-B Manual de instrucciones Aparato de seguridad 0
9 Pelco Camclosure 2 Is20-Chv10s Surveillance Camera IS20CHV10S Manual de instrucciones Aparato de seguridad 23
10 Pelco ESPRIT IOP C309M-J Manual de instrucciones Aparato de seguridad 0
11 Pelco INTERCEPT IOP08 Manual de instrucciones Aparato de seguridad 4
12 Pelco 12ZM8.5X6C Manual de instrucciones Aparato de seguridad 0
13 Pelco DX4700 Manual de instrucciones Aparato de seguridad 93
14 Pelco DX4800 Manual de instrucciones Aparato de seguridad 215
15 Pelco 13M15-50 Manual de instrucciones Aparato de seguridad 0
16 Edelbrock 1910 Manual de instrucciones Aparato de seguridad 18
17 Sony CCU-M5AP Manual de instrucciones Aparato de seguridad 5
18 Sony 100 Manual de instrucciones Aparato de seguridad 0
19 Sony DF70P Manual de instrucciones Aparato de seguridad 4
20 Sony CH280 Manual de instrucciones Aparato de seguridad 2