Resumen del contenido incluido en la página 1
TB1010, TB1212, TB1515
282 Carver Street
Powered Home Subwoofer
WINSLOW, IL 61089
Owner’s Manual
(Phone) (877)-DCM-LOUD
21A6431
Resumen del contenido incluido en la página 2
CARE AND MAINTENANCE Your speakers are designed to work with a wide range of electronic components. As little as 20 watts per channel can provide enough power for most applications. If you have a large room or prefer louder listening levels, more power may be required. Caution: When choosing an amplifier, do not exceed the power rating of the speaker. If you hear very high levels of audible distortion you are exceeding the capabilities of the system. Damage can occur from this distorti
Resumen del contenido incluido en la página 3
SAFETY SYMBOLS AND STATEMENTS SPECIFICATIONS TB1010 TB1212 TB1515 Amplifier Type: Class A/B Class A/B Class D Amplifier Power: 100 Watts 130 Watts 250 Watts Frequency response: 33-120Hz 27-120Hz 27-120Hz Inputs: Line level Line level Line level
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS IN CASE OF TROUBLE 1. Read Instructions – All the safety and operating should be routed so that they are not likely to be Your new subwoofer, once set-up and adjusted, should give you years of listening instructions should be read before the product is walked on or pinched by items placed upon or against opened. them, paying particular attention to cords at plugs, enjoyment with your favorite movies and music. However, if you should experience convenience rec
Resumen del contenido incluido en la página 5
OPERATION After you have connected your subwoofer, adjusted it for proper operation with the rest of your system, and experimented to find the best location for it, it’s time to sit back and enjoy it. As you do, here are some hints for getting the most out of your subwoofer. A) The subwoofer’s level control is designed to adjust the balance between your POWERED HOME SUBWOOFER subwoofer and main stereo speakers and should not be used as a substitute for the bass or loudness controls on your
Resumen del contenido incluido en la página 6
CONGRATULATIONS... SET-UP AND ADJUSTMENT ... on your purchase of a DCM powered home subwoofer system. Your new After you have selected an initial location for your subwoofer and have connected subwoofer is one of the most exciting home entertainment electronic products it into your system, have a seat in your normal listening position and have available, adding impact and realism to recorded music and the wide variety of someone help you with the following adjustments: movies to be foun
Resumen del contenido incluido en la página 7
B) For use with A/V preamps and receivers that have 5.1 channel line level UPACKING/PRE-INSTALLATION INSTRUCTIONS outputs. If your preamplifier or receiver has a single “subwoofer” output or “LFE” output, Unpack your new subwoofer carefully, keeping the carton and packing material for connect a shielded cable from the preamplifier output to either one of the future use. Also, write the serial number in your home records for later reference. subwoofer line level inputs. Refer to Figure E. C
Resumen del contenido incluido en la página 8
Installation using line level inputs EXPLANATION OF FEATURES AND CONTROLS A) Using a preamp or receiver with line level outputs. Refer to figure A. If a preamplifier output is available on your receiver, or you have a preamplifier, 1) Polarity switch: This two position switch allows the best match of acoustic connect it to the stereo line level RCA type input jacks on your subwoofer. Use output between the subwoofer and the main stereo speakers in the region of the quality shielded cables
Resumen del contenido incluido en la página 9
B) For amplifiers with two sets of speaker connections. An alternate method of connecting your subwoofer and main speakers is possible if you have a receiver or amplifier that can accommodate two sets of speakers that can be switched on at the same time and be connected in parallel. (Note that some receivers and amplifiers connect “A” and “B” sets of speakers in series, not parallel. A series wiring will not allow this alternate connection method for your 3 9 subwoofer. Consult the owner’s
Resumen del contenido incluido en la página 10
WIRING AND CONNECTIONS PLACEMENT OR POSITIONING Your new subwoofer will work well in a variety of locations. However, placement Turn off all power to your subwoofer and other equipment before making in your listening room will affect its performance. Since the wavelengths of sound any connections. reproduced by your subwoofer are large compared to its size, those sounds are omni-directional in nature. This means that locating your subwoofer in relation Installation using speaker level inp
