Manual de instrucciones de HP (Hewlett-Packard)

Resumen del contenido incluido en la página 1

External Media Cards
User Guide

Resumen del contenido incluido en la página 2

© Copyright 2006 Hewlett-Packard Development Company, L.P. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: September 20

Resumen del contenido incluido en la página 3

Table of contents 1 Using Memory Reader cards (select models only) Inserting a digital card .......................................................................................................................... 2 Stopping and removing a digital card ................................................................................................... 3 2 Using ExpressCards Configuring an ExpressCard ..............................................................................................

Resumen del contenido incluido en la página 4

iv ENWW

Resumen del contenido incluido en la página 5

1 Using Memory Reader cards (select models only) Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. The Memory Reader supports the following digital card formats: ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● Secure Digital Input/Output (SD I/O) ● Secure Digital (SD) Memory Card ● xD-Picture Card (XD) ● xD Picture Card (XD) Type M CAUTION T

Resumen del contenido incluido en la página 6

Inserting a digital card CAUTION To prevent damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the digital card label-side up, with the connectors facing the computer. 2. Gently slide the card into the Memory Reader until the card is seated. You will hear a sound when the device has been detected. NOTE The first time you insert a digital card, the "Found New Hardware" message is displayed in the notification area, at the far right of the taskbar. 2 Chapter

Resumen del contenido incluido en la página 7

Stopping and removing a digital card CAUTION To prevent loss of data or an unresponsive system, stop a digital card before removing it. 1. Close all files and applications that are associated with the digital card. NOTE To stop a data transfer, click Cancel in the operating system Copying window. 2. Stop the digital card: a. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE To display the Safely Remove Hardware icon, click the Show Hidde

Resumen del contenido incluido en la página 8

2 Using ExpressCards An ExpressCard is a next-generation, high-performance PC Card that is inserted into the ExpressCard slot. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device. If you are instructed by the ExpressCard manufacturer to install device drivers: ● Install only the device drivers for your opera

Resumen del contenido incluido en la página 9

Inserting an ExpressCard CAUTION To prevent damage to the computer and external media cards, do not insert an ExpressCard into a PC Card slot or a PC Card into an ExpressCard slot. CAUTION To prevent damage to the connectors: Use minimal force when inserting an ExpressCard. Do not move or transport the computer when an ExpressCard is in use. The ExpressCard slot may contain a protective insert. The insert must be removed before you can insert an ExpressCard. To release and remove the protective

Resumen del contenido incluido en la página 10

Stopping and removing an ExpressCard CAUTION To prevent loss of data or an unresponsive system, stop an ExpressCard before removing it. 1. Close all programs and complete all activities that are associated with the ExpressCard. NOTE To stop a data transfer, click Cancel in the operating system Copying window. 2. Stop the ExpressCard: a. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE To display the Safely Remove Hardware icon, click th

Resumen del contenido incluido en la página 11

Index C configuring ExpressCards 4 D digital card defined 1 inserting 2 removing 3 stopping 3 E ExpressCard configuring 4 defined 4 removing 6 removing insert 5 stopping 6 ExpressCards inserting 5 ENWW Index 7

Resumen del contenido incluido en la página 12