Manual de instrucciones de Yamaha P-2200/2201

Manual de instrucciones del aparato Yamaha P-2200/2201

Aparato: Yamaha P-2200/2201
Categoría: Amplificador estéreo
Fabricante: Yamaha
Tamaño: 1.82 MB
Fecha de añadido: 2/23/2014
Número de páginas: 59
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Yamaha P-2200/2201. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Yamaha P-2200/2201.

Para tu comodidad

Si ver los manuales de instrucción de Yamaha P-2200/2201 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Yamaha P-2200/2201 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Yamaha P-2200/2201 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Yamaha P-2200/2201 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 59 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Yamaha P-2200/2201, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Yamaha P-2200/2201. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

YAMAHA
AUTHORIZED
PRODUCT MANUAL
P-2200/2201
SYSTEM AMPLIFIER

Resumen del contenido incluido en la página 2

Resumen del contenido incluido en la página 3

ABOUT THIS MANUAL SCOPE The P-2200 is a system oriented amplifier, made to be used in conjunction with mixers, consoles, frequency dividing networks and speakers — those made by Yamaha or by other manufacturers. Like any power amplifier, the P-2200's performance depends on system design and installation, in addition to its own capabilities. Thus, the P-2200 Operating Manual is system oriented, describing system design parameters and installation techniques, as well as the operation and performan

Resumen del contenido incluido en la página 4

THE P-2200/2201 BRIEF OPERATING INSTRUCTIONS SECTION ONE INTRODUCTION SECTION TWO GENERAL SPECIFICATIONS SECTION THREE PERFORMANCE GRAPHS & A DISCUSSION OF SPECIFICATIONS SECTION FOUR THE DISTINCTION BETWEEN PROFESSIONAL AND HI-FI EQUIPMENT SECTION FIVE 1 IMPEDANCE 2 OPERATING LEVELS 2 DYNAMIC RANGE 4 GAIN OVERLAP AND HEADROOM 4 INPUT SENSITIVITY RATINGS 4 PROFESSIONAL EQUIPMENT ADVANTAGES SECTION SIX INSTALLATION AND DETAILED OPERATION 1 PHYSICAL MOUNTING 2 CABLING AND IMPEDANCE MATCHING ACTIO

Resumen del contenido incluido en la página 5

THE P-2200/2201 BRIEF OPERATING INSTRUCTIONS Fig. 1A - P-2200 Front Panel Fig. 1B - P2201 Front Panel A. Input Attenuators Calibrated, stepped input attenuators lower input signal levels ahead of amplification stages. B. Peak Reading Meters (P-2200 only) Meters display instantaneous (peak) power output into an 8-ohm load over a full 50dB range; "0dB" = 100 Watts into 8 ohms. C. Thermal Warning Indicator Warns of overheating before thermal protection circuit turns off the AC power. D. Power Indic

Resumen del contenido incluido en la página 6

Fig. 2A - P-2200 Rear Panel* Fig. 2B - P2201 Rear Panel* A. Input Connectors D. AC Power Cord The two XLR input connectors on each channel are For the U.S. and Canadian models, the P-2200/2201 unbalanced and are wired in parallel with each other require 117 VAC 50 or 60 Hz line (10 5 V min., 13 5 V and with the two phone jacks (tip/sleeve type). max.; 8 amps max. at 120 volts). For the Australian model: 240V AC 50 or 60 Hz. B. Input Polarity Switch For other territories' models, an internal volt

Resumen del contenido incluido en la página 7

INTRODUCTION PERFORMANCE The P-2200's performance is as impressive as its features. At a sustained output of 230 watts into 8 ohms (for each channel), there is plenty of punch to reproduce the powerful peaks essential to clean studio monitoring. High power handling also makes the P-2200 an unbeat- able choice for live rock or disco sound systems, where an amplifier can really "cook" all night long. Power alone is no virtue; the P-2200 has ultra-low distortion, less than 0.05% THD at full rated p

Resumen del contenido incluido en la página 8

GENERAL SPECIFICATIONS Phase Shift: (Refer to Figure 11. ) 20Hz to 20kHz, ±1 0 degrees. Offset Voltage: Less than ±10mV DC. Unit Step Function Response: (Refer to Figure 27.) See scope photo (Page FOUR 4) and discussion, Page FOUR 6. Thermal Specifications: Massive black anodized heat sinks are thermally Power Output Per Channel: (Refer to Figure 3. Ambient joined with the chassis, thereby utilizing the entire room temperature for tests: 25-degrees Centigrade.) amplifier as a heat sink. 200 Watt

Resumen del contenido incluido en la página 9

Controls: MONAURAL MODE SPECIFICATIONS 22-position, log-linear, detented, and dB-calibrated Power Output: (Refer to Figures 14 and 15.) INPUT ATTENUATORS (one per channel) 400 Watts continuous average sine wave power into attenuate input signal in 2dB steps from 0dB 16 ohms with less than 0.05% THD, 20Hz to 20kHz. attenuation to -34dB, then steps of -37dB, -42dB, Frequency Response: (Refer to Figure 16) -50dB, infinity; Power (ON-OFF) switch; INPUT +0dB, -1dB, 20Hz to 50kHz. POLARITY switches. T

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Fig. 9 - Actual Output Impedance vs Frequency Fig. 10 - Crosstalk (Channel Separation) Fig. 1 1 - Phase Response vs Frequency Fig. 12 - Power Consumption Fig. 13 - Peak Program Meter Accuracy (P-2200 only)

Resumen del contenido incluido en la página 12

Resumen del contenido incluido en la página 13

The following are actual oscilloscope photographs made by an independent testing laboratory. The close vertical alignment of input and output traces in Fig. 21 through 23 depicts very low phase shift, so the amplifier will not alter musical wave shapes. Fig. 24 - 1,000Hz Sine Wave, shown with Highly- Magnified Noise and Distortion Components Even at full 230 watt output (8-ohms), the P-2200's distortion is so low that it is almost burried in the noise, which is at least 110dB below the sine wave

Resumen del contenido incluido en la página 14

POWER OUTPUT DISTORTION (Refer to Figures 6A-B, 7, 17, 18) The P-2200 is designed to have the lowest possible Types of Power Ratings distortion. There are many different forms of distortion, Peak power refers to the maximum undistorted power however, and comprehensive distortion ratings offer a output of an amplifier. Most amplifiers cannot sustain means to compare the performance of different their peak power ratings for long periods of time without amplifiers. external cooling fans. Because th

Resumen del contenido incluido en la página 15

Intermodulation Distortion, or I.M. is characterized UNIT STEP FUNCTION RESPONSE (Refer to Figure 27) by the appearance in the output waveform of fre- A unit step function is like the leading edge of a quencies that are equal to sums and differences of square wave; it goes up, but never comes down. The integral multiples of two or more of the frequencies response to this input indicates the output of the P-2200 present in the input signal. The difference between inter- for a DC input signal whic

Resumen del contenido incluido en la página 16

HUM AND NOISE an 8-ohm load. 230 watts into 8 ohms implies an Hum or noise from a power amplifier disrupts a output voltage of 43 volts which corresponds to +35dB program, and is irritating to a listener. Hum and noise (referenced to 0.775 volts, as used in this manual). The could be considered a form of distortion. The P-2200's voltage gain of the P-2200, with its input attenuators set hum and noise are so low that they are completely for minimum attenuation, then, is 31dB [(+35dB)-(+4dB)]. ina

Resumen del contenido incluido en la página 17

During the "overshoot" movement, the voice coil of the loudspeaker interacts with the loudspeaker's magnetic assembly to produce a voltage called "back E.M.F." (electro-motive force). This action is similar to the operation of a dynamic microphone. If the amplifier's output impedance is low, this "back E.M.F." voltage is shunted through the amplifier's output circuits to ground, and back to the voice coil. Since the path from the voice coil, through the amplifier's output circuits, and back to t

Resumen del contenido incluido en la página 18

THE DISTINCTION BETWEEN usually unbalanced, and use single conductor shielded cables with 2-conductor connectors, either standard PROFESSIONAL AND HI-FI phone plugs or phono plugs (also called RCA or pin EQUIPMENT plugs). Occasionally, the inputs of a piece of hi-fi or semi-pro equipment are professional XLR connectors which have been converted to a 2-wire, unbalanced circuit by internally connecting either pin 2 or pin 3 to pin 1. The nature of unbalanced, balanced, and floating circuitry is di

Resumen del contenido incluido en la página 19

Cables from high impedance sources (5000 ohms and its use with some hi-fi or semi-pro equipment, however up), should not be any longer than 25', even if low it's a good idea to check the specifications for each capacitance cable is used; shorten the cables if the situation. The point of this discussion, is that impedance impedance is higher. For low impedance sources of 600 and level are extremely important considerations when ohms or less, cable lengths to 100' are relatively effective. connect

Resumen del contenido incluido en la página 20

NOTE: The P-2200 actually has a maximum signal to noise ratio of 110dB (which is its dynamic range!. The SYSTEM'S Dynamic Range is limited by acoustic noise at the mic input, for the system shown, and by the maximum signal to noise ratio of the PM-700 Mixer (93dB), a very respectable figure for a high gain device. Fig. 33 - Dynamic Range in an Audio System


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Yamaha A-S1000 Manual de instrucciones Amplificador estéreo 80
2 Yamaha A100 Manual de instrucciones Amplificador estéreo 91
3 Yamaha A-S700 Manual de instrucciones Amplificador estéreo 46
4 Yamaha A350 Manual de instrucciones Amplificador estéreo 48
5 Yamaha AA5 Manual de instrucciones Amplificador estéreo 23
6 Yamaha A150 Manual de instrucciones Amplificador estéreo 40
7 Yamaha 150 Manual de instrucciones Amplificador estéreo 5
8 Yamaha A250 Manual de instrucciones Amplificador estéreo 17
9 Yamaha AX-10 Manual de instrucciones Amplificador estéreo 94
10 Yamaha AX-1070 Manual de instrucciones Amplificador estéreo 60
11 Yamaha AV-90PY Manual de instrucciones Amplificador estéreo 21
12 Yamaha 396 Manual de instrucciones Amplificador estéreo 39
13 Yamaha AX-1070/870 Manual de instrucciones Amplificador estéreo 102
14 Yamaha AX-392 Manual de instrucciones Amplificador estéreo 221
15 Yamaha AX-496 Manual de instrucciones Amplificador estéreo 131
16 Sony SA-VE312 Manual de instrucciones Amplificador estéreo 9
17 Sony MONAURAL Manual de instrucciones Amplificador estéreo 1
18 Sony 4-151-113-11 (1) Manual de instrucciones Amplificador estéreo 0
19 Sony 645-139 Manual de instrucciones Amplificador estéreo 3
20 Sony XM-1252GTR Manual de instrucciones Amplificador estéreo 35