Manual de instrucciones de Yamaha TX5n

Manual de instrucciones del aparato Yamaha TX5n

Aparato: Yamaha TX5n
Categoría: Amplificador estéreo
Fabricante: Yamaha
Tamaño: 1.37 MB
Fecha de añadido: 8/7/2014
Número de páginas: 60
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Yamaha TX5n. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Yamaha TX5n.

Para tu comodidad

Si ver los manuales de instrucción de Yamaha TX5n directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Yamaha TX5n en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Yamaha TX5n a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Yamaha TX5n Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Yamaha TX5n, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Yamaha TX5n. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

Reference Manual
EN

Resumen del contenido incluido en la página 2

Contents X-Over Input Level (Speaker Processor) ..............35 Introduction............................................. 3 X-Over Polarity (Speaker Processor)....................35 About the documentation..........................................3 X-Over (Speaker Processor).................................36 Setup ...........................................................................3 Output Delay (Speaker Processor) .......................37 Terms.........................................

Resumen del contenido incluido en la página 3

Introduction About the documentation This manual mainly explains operation and specifications for the TX6n, TX5n, and TX4n (subsequently referred to as TXn) power amplifiers. When using the TXn, you will also need to consult various manuals other than this document. ● Manuals other than this document TX6n/5n/4n Owner’s Manual (printed) Explains mainly the initial setup. Amp Editor Installation Guide (PDF) Explains the installation procedure for Amp Editor and the uninstallation procedure. Amp E

Resumen del contenido incluido en la página 4

Introduction Terms This section explains terminology specific to the TXn. ■ Amp Editor This is computer application software. This software allows you to monitor and control the TXn amplifiers from your com- puter. ■ Scene Settings such as power-on/standby or mute for each amplifier are called a “scene.” By recalling a scene, the saved settings can be immediately applied to the amplifiers. Each TXn unit has 50 scenes. ■ Signal Path This is the audio signal processing functionality provided by the i

Resumen del contenido incluido en la página 5

Controls and Connectors Front Panel @0 !9 !9 @0 i i !4 oo !0 !0 !1 !1 e !2 !2 r t y !5 q u q !3 !3 w !6 !7 !8 q [POWER] switch and indicator This switch turns the amplifier’s power on or off. When you turn this switch on, the [POWER] indicator will light white. In Standby mode, it will light white as well. w [STANDBY] indicator This indicator will light orange when the amplifier’s power is in Standby mode. To switch between Standby/On modes, hold down the TXn’s panel [HOME] button for three seco

Resumen del contenido incluido en la página 6

Controls and Connectors t [PROTECTION] indicator When the protection system is active, this indicator will light red. The protection circuit will operate in the following situa- tions. • If the amplifier overheats and the output limiter operates The speaker output will be attenuated if the heat sink of the amplifier section exceeds 80°C (80%), and will be muted if the heat sink exceeds 90°C (90%). The [PROTECTION] indicator will light at 80°C (80%) or higher. • If the power supply overheats and s

Resumen del contenido incluido en la página 7

Controls and Connectors !3 Encoders A, B When the display shows the attenuation meter, these encoders adjust the attenuation of channels A and B. If any other screen is displayed, encoder A moves the cursor and encoder B modifies the parameter value. NOTE • Only encoder A can be operated if you’re adjusting the attenuation when the amplifier mode is Bridge. !4 Display This shows the amplifier’s settings or a level meter. Refer to “Screen Structure” (page 13) for details. NOTE • If the power supply

Resumen del contenido incluido en la página 8

Controls and Connectors Rear Panel @1 @2 @4 @5 @7 @6 @3 @1 [SPEAKERS] jacks These are speaker output jacks. • Speakon connectors : Speakon type cable plugs (Neutrik NL4) can be connected here. • Five-way binding post connectors : Bare wires or Y plugs can be connected here. NOTE • The five-way binding post connectors and Speakon connectors are internally connected in parallel. If you’re using both simultaneously, make sure that the speaker impedance of each connector is 4–16 ohms (8–32 ohms in B

Resumen del contenido incluido en la página 9

Controls and Connectors @4 [NETWORK] connector This is a 100BASE-TX/10BASE-T Ethernet connector. You can connect this to a computer so that the amplifier can be mon- itored and controlled from Amp Editor. This also allows an external controller such as AMX or Crestron to be connected. NOTE •To prevent electromagnetic interference, use an STP (Shielded Twisted Pair) cable for the [NETWORK] connector. @5 [FAULT OUTPUT] connectors This is a 3P Euroblock connector for controlling an external analog d

Resumen del contenido incluido en la página 10

Controls and Connectors ■ Removing and installing a card To remove and install a card, proceed as follows. 1. Make sure that the power of the TXn is turned off. 2. Loosen the screws that fasten the slot, and remove the installed card. Keep the removed card in a safe place. 3. Align the two edges of the card to be installed with the guide rails inside the slot, and insert the card into the slot. Push the card all the way into the slot so that the contacts of the card are correctly mated with the

Resumen del contenido incluido en la página 11

Controls and Connectors Cleaning the air filters To ensure adequate cooling air intake, the filter elements must be cleaned when they have become clogged. Follow the description below to clean each of the filter elements. 1. Make sure that the power to the amplifier is turned off. 2. Disconnect the power cable from the AC outlet. 3. Remove the two screws that fasten the front filter grill, and remove the grill. 4. Remove the filter element, and wash it in plain water. If the filter element is exceptio

Resumen del contenido incluido en la página 12

Panel Operations Basic Operations ■ About the Display Shows an alert message if an alert event occurs such as an abnormality in the amplifier. Shows the contents of the selected screen. Shows the names of the screens assigned to the function buttons. ■ Switching Screens By pressing a function button you can move to the screen indicated above that button. By pressing the [HOME] button you can move to the HOME screen. By pressing the [EXIT] button you can move to the screen one level above. ■ E

Resumen del contenido incluido en la página 13

Panel Operations Screen Structure HOME Screen METER Screen SETTING Screen METER SETTING • ANA INPUT VOLTAGE • ANA INPUT VOLTAGE • SLOT INPUT VOLTAGE • SLOT INPUT VOLTAGE • SP OUTPUT VOLTAGE • SP OUTPUT VOLTAGE • SP OUTPUT POWER • SP OUTPUT POWER • SP OUTPUT IMPEDANCE • SP OUTPUT IMPEDANCE • SLOT OUTPUT METER • SLOT OUTPUT METER • THERMAL • THERMAL UTILITY Screen General UTILITY • Device Setup • Sensitivity/Amp Gain • Word Clock Setup • Stereo/Bridge/Parallel • Information • Attenuation Link • Ne

Resumen del contenido incluido en la página 14

Panel Operations Operations that can be Performed from the Panel Category Subcategory Explanation METER ANA INPUT VOLTAGE Shows the input level from the analog input connectors. (page 16) SLOT INPUT VOLTAGE Shows the input level from the slot. SP OUTPUT VOLTAGE Shows the output level from the [SPEAKERS] connectors. SP OUTPUT POWER Shows the output power from the [SPEAKERS] connectors. SP OUTPUT IMPEDANCE Shows the output impedance from the [SPEAKERS] connectors. SLOT OUTPUT METER Shows the outpu

Resumen del contenido incluido en la página 15

Panel Operations Alert Messages When an alert event occurs related to the amplifier’s audio, such as when an abnormality has occurred in the amplifier, an alert message will appear in the upper part of the display. At this time the [ALERT] indicator of each channel will also light. Alert message If Amp Editor is being used online, the alert message will also appear in Amp Editor. When an alert event occurs, it will be recorded in the event log of the amplifier itself, and the recorded event log c

Resumen del contenido incluido en la página 16

Panel Operations METER Screen This shows the input/output levels of the audio signal, and the status of the power supply. As when you’re in the HOME screen, you can use encoders A/B to adjust the attenuation of each channel. To access the METER screen, access the HOME screen and press the left-most function button (METER). You can change the meter type by using the left-most function button (PREV) and right-most function button (NEXT). ww e q e q Level meter This shows the name of the currentl

Resumen del contenido incluido en la página 17

Panel Operations SETTING Screen For each meter type, this screen lets you specify various parameters for alert detection, peak hold, and display units. ● Setting procedure 1. In the HOME screen, press the left-most function button (METER) to access the METER screen. 2. Use the function buttons (PREV/NEXT) to access the screen for the meter whose settings you want to change. 3. Press the second-from-right function button (SETTING) to access the SETTING screen for that meter. 4. Press the second-

Resumen del contenido incluido en la página 18

Panel Operations ● Parameters that can be edited The parameters that can be edited will depend on the meter type. Parameter Range Explanation Detect Enable ON/OFF Specifies whether alert detection will be enabled or disabled. An alert message will be displayed if a point exceeding the specified value (Alert Min/Max TH) is detected for the specified number of times (Detect Count) within the specified duration (Detect Time). Detection is in 2 ms intervals. Alert Min TH * Specifies the lower thresho

Resumen del contenido incluido en la página 19

Panel Operations UTILITY Screen Here you can make settings for the amplifier itself and for the network. ● Setting procedure 1. In the HOME screen, press the second-from-left function button (UTILITY) to access the UTILITY screen. 2. Use the function buttons (PREV/NEXT) to access the screen for the sub-category whose settings you want to change. 3. Use encoder A to move the cursor to the parameter that you want to edit, and encoder B to edit the parameter value. 4. If the parameter value is blink

Resumen del contenido incluido en la página 20

Panel Operations ■ Word Clock Setup Here you can select the master word clock that will synchronize digital audio signal processing. q e w r q Fs Indicates the current word clock frequency. w Int The status of the internal word clock. There are four possibilities: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz. The default setting is 96 kHz. e Slot The word clock status of the card inserted in the slot. Normally, the reference word clock signal is transmitted from a single device, and the other devices


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Yamaha A-S1000 Manual de instrucciones Amplificador estéreo 80
2 Yamaha A100 Manual de instrucciones Amplificador estéreo 91
3 Yamaha A-S700 Manual de instrucciones Amplificador estéreo 46
4 Yamaha A350 Manual de instrucciones Amplificador estéreo 48
5 Yamaha AA5 Manual de instrucciones Amplificador estéreo 23
6 Yamaha A150 Manual de instrucciones Amplificador estéreo 40
7 Yamaha 150 Manual de instrucciones Amplificador estéreo 5
8 Yamaha A250 Manual de instrucciones Amplificador estéreo 17
9 Yamaha AX-10 Manual de instrucciones Amplificador estéreo 94
10 Yamaha AX-1070 Manual de instrucciones Amplificador estéreo 60
11 Yamaha AV-90PY Manual de instrucciones Amplificador estéreo 21
12 Yamaha 396 Manual de instrucciones Amplificador estéreo 39
13 Yamaha AX-1070/870 Manual de instrucciones Amplificador estéreo 102
14 Yamaha AX-392 Manual de instrucciones Amplificador estéreo 221
15 Yamaha AX-496 Manual de instrucciones Amplificador estéreo 131
16 Sony SA-VE312 Manual de instrucciones Amplificador estéreo 9
17 Sony MONAURAL Manual de instrucciones Amplificador estéreo 1
18 Sony 4-151-113-11 (1) Manual de instrucciones Amplificador estéreo 0
19 Sony 645-139 Manual de instrucciones Amplificador estéreo 3
20 Sony XM-1252GTR Manual de instrucciones Amplificador estéreo 35