Resumen del contenido incluido en la página 1
U C A
DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN/CLOSE
3–DISC CD CHANGER
PRESET/TUNING/BAND A/B/C/D/E
VOLUME
DOWN UP
STANDBY TIMER
PROGRAM B.BOOST MUSIC INPUT INPUT
PUSH OPEN
MINI COMPONENT SYSTEM GX–700
STANDBY/ON
AUTO REVERSE CASSETTE DECK DOLBY B NR
DIRECTION
OWNER’S MANUAL
MODE D’EMPLOI
Resumen del contenido incluido en la página 2
• Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, RISK OF ELECTRIC SHOCK is intended to alert you to the DO NOT OPEN presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient CAUTION: TO REDUCE THE RISK OF magnitude to constitute a risk of ELECTRIC SHOCK, DO NOT REMOVE electric shock to persons. COVER (OR BACK). NO USER-SERVICEABLE The exclamation point within an PARTS IN
Resumen del contenido incluido en la página 3
EXAMPLE OF ANTENNA GROUNDING 19 For US customers only: Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of ANTENNA MAST LEAD IN the National Electrical Code, ANSI/NFPA 70, provides WIRE information with regard to proper grounding of the mast GROUND and supporting structure, grounding of the lead-in wire to CLAMP an antenna discharge
Resumen del contenido incluido en la página 4
Unpacking l After unpacking, check that the following parts are contained. Déballage l Après le déballage, vérifier que les pièces suivantes sont incluses. DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN/CLOSE l Front speakers l Main unit – 3 DISC CD CHANGER l Enceintes avant l Appareil principal PRESET/TUNING/BAND A/B/C/D/E VOLUME DOWN UP STANDBY TIMER PROGRAM B.BOOST MUSIC INPUT INPUT PUSH OPEN MINI COMPONENT SYSTEM GX–700 STANDBY/ON AUTO REVERSE CASSETTE DECK DOLBY B NR DIRECTION l Center speaker l
Resumen del contenido incluido en la página 5
l Setting this system l Installation de ce système 20 cm 20 cm 20 cm 20 cm 1 cm 1 cm 20 cm 20 cm 20 cm 20 cm English Set this system allowing enough spaces around and behind the main unit to assure good ventilation. Be sure not to place another unit or any object on top of the main unit to prevent the ventilation holes from being obstructed. Otherwise, it may cause fire or damage to the main unit. Note When placing the speakers apart from the
Resumen del contenido incluido en la página 6
l Front panel l Panneau avant LO M N DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN/CLOSE 0, P – 3 DISC CD CHANGER PRESET/TUNING/BAND A/B/C/D/E 1 A, Q 2 B, R VOLUME DOWN UP 3 STANDBY TIMER 4 C 5 D E PROGRAM B.BOOST MUSIC INPUT INPUT 6 F, S RANDOM REPEAT TIME T BASS TREBLE PHONES HOUR MIN 7 MODE DOLBY NR REC/PAUSE AUTO/MANUAL MEMORY DISPLAY G,U TIMER TIME ADJ H I STANDBY/ON 8 J K 9 ] ` DOLBY B NR AUTO REVERSE CASSETTE DECK DIRECTION V WX[ Y Z \ 4 4 4
Resumen del contenido incluido en la página 7
Amplifier/tuner Amplificateur/tuner 1 Display panel 8 BASS/TREBLE [p. 30] E INPUT ( / ) [p. 12, 18, 22, 29] Panneau d’affichage TUNER → TAPE → CD 9 Front cover ↑ ↓ AUX/MD ← VCR ← VIDEO 2 Remote control sensor Couvercle avant Capteur de télécommande F HOUR [p. 9, 35] 0 / [p. 18, 19] 3 TIMER G MIN [p. 9, 35] A A/B/C/D/E [p. 19] 4 STANDBY [p. 12] H DISPLAY [p. 9, 35] B PRESET/TUNING/BAND 5 B. BOOST [p. 30] [p. 18] I MEMORY [p. 19, 20] TIME ADJ [p. 9] 6 PROGRAM [p. 10, 33] C VOLUME [p. 30] J
Resumen del contenido incluido en la página 8
l Remote control l Telecommande 1 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 2 F 6 7 8 PRESET 6 7 8 PRESET 6 7 8 9 0 6 7 8 9 0 9 AB C D E AB C D E 3 G TIME PROG R. TIME EDIT +I0 TIME PROG R. TIME EDIT +I0 MODE REPEAT RANDOM TUNER P H MODE REPEAT RANDOM TUNER 0 I DISC SKIP DISC SKIP Q TUNER CD TUNER CD J REC/PAUSE KLMNO A TAPE DIRECTION 4 CENTER/ BASS B REAR/DELAY TEST PROGRAM BOOST MUSIC 5 S T U LEVEL C 6 INPUT VOLUME REC/PAUSE POWER SLEEP D /I R 7 TAPE DIRECTION V 8 E CENTER/ BASS REAR/D
Resumen del contenido incluido en la página 9
Amplifier/tuner Amplificateur/tuner 6 LEVEL (+/–) B MUSIC [p. 31] 1 Transmission window [p. 10, 33] Fenêtre de transmission C BASS BOOST [p. 4] [p. 30] 7 POWER [p. 10] 2 Numeric buttons D VOLUME (+/–) Touches numériques [p. 30] 8 SLEEP [p. 36] [p. 19] E INPUT ( / ) 9 PRESET ( / ) 3 A, B, C, D, E [p. 19] [p. 12, 18, 22, 29] [p. 19] 4 TEST [p. 10] TUNER → TAPE 0 TUNER [p. 18] ↑↓ 5 CENTER/REAR/DELAY AUX/MD CD A PROGRAM [p. 33] ↑↓ [p. 10, 33] VCR ← VIDEO CD player Lecteur de disque compact F
Resumen del contenido incluido en la página 10
English Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Contents Page Page SAFETY INSTRUCTIONS Playing back a tape .................................. 21 .............................Inside of the Front Cover General information ............................................... 21 Precautions..........................................
Resumen del contenido incluido en la página 11
English Precautions: Read this before operating your system n To assure the finest performance, please read this manual n Although the tape deck’s record/playback heads are high carefully. Keep it in a safe place for future reference. quality heads with outstanding reproduction characteristics, they can become dirty through the use of n Choose the installation location of this system carefully. old tapes or from dust accumulation over time. This can Avoid placing it in direct sunlight or close t
Resumen del contenido incluido en la página 12
Precautions: Read this before operating your system CAUTION FOR CARRYING THE MAIN UNIT IMPORTANT Be sure not to carry or tip the main unit with discs Please record the serial number of this system in the space remaining in it. below. Model: CAUTION FOR MOVING THE MAIN UNIT Before moving the main unit, first remove all discs from Serial No.: the disc tray and close the tray by pressing the OPEN/ The serial number is located on the rear of the main unit. CLOSE button. After you confirm that “NO DI
Resumen del contenido incluido en la página 13
English Features General Compact Disc Player c 5-Speaker Multichannel Audio System c 3-Disc Carousel Type CD Changer (Two front, One Center and Two Rear Speakers) c PLAYXCHANGE Disc changing while playing c High Power Output c 20-Track Random Access Programming Front L, R: 80W + 80W (6Ω) RMS, 0.9% THD, 1 kHz c Repeat Play for Single Track/Entire Disc/ Center: 80W (6Ω) RMS Output All Discs Power, 0.9% THD, 1 kHz Rear: 25W (6Ω) RMS Output c Random Sequence Play Power, 0.9% THD, 1 kHz Tape Deck c 4
Resumen del contenido incluido en la página 14
30° Preparations and connections Installing batteries in the remote control 1. Turn the remote control over and remove the battery 1 compartment cover by pulling it up while pressing the edge of the cover in the direction of the mark. 2. Insert the batteries (AA, R6, UM-3 type) according to the polarity markings on the inside of the battery compartment. 3 3. Attach the battery compartment cover. Notes c Remove the batteries if the remote control is not used for an extended period of time. c
Resumen del contenido incluido en la página 15
English Preparations and connections Setting up the speakers Front L Center Front R m 4 channel 5 speaker configuration This system employs a 5 speaker configuration: 2 front Dialogue Dialogo speakers, 2 rear paralleled speakers and a center speaker. The front speakers are used for outputting main source sound. The rear speakers are for effect and surround sounds when the sound field program PRO LOGIC or HALL is selected. The center speaker is for center sounds (dialog etc.) when the sound fiel
Resumen del contenido incluido en la página 16
Preparations and connections m Mounting the rear speakers Mount the rear speakers on a shelf, rack or on the floor, or 60 mm hang them on the wall. To mount the rear speakers on the wall by using commercially available speaker stands The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are available for mounting the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. Note Mounting It is recommended that you connect the speaker cords
Resumen del contenido incluido en la página 17
English Preparations and connections Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Subwoofer system (Separate purchase) Rear speaker Rear speaker Center speaker R L (U.S.A model) INPUT SPEAKERS SEE OWNER’S MANUAL FOR CONNECTION. REAR R CENTER L REAR SUBWOOFER VIDEO SIGNAL OUT MONITOR OUT RL OUT CENTER: 6Ω MIN./SPEAKER Front speakers VCR REAR: I2Ω MIN./SPEAKER IN L R VIDEO OUT MAINS AUX/MD IN R FRONT L 6Ω MIN./SPEAKER SPEAKERS
Resumen del contenido incluido en la página 18
Preparations and connections m Antenna connection (1) (1) Supplied FM antenna ANTENNA Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the FM GND AM strongest signal can be received. 75Ω UNBAL. (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception. ANTENNA Notes FM GND AM c When static is still heard even after adjusting the position of 75Ω UN
Resumen del contenido incluido en la página 19
English Preparations and connections Setting the clock 1 While the power is on, press DISPLAY to display the time. DISC 1 DISC 2 DISC 3 DISC CHANGE OPEN/CLOSE 2 While holding TIME ADJ pressed, press HOUR and set the hour. – 3 DISC CD CHANGER * Press HOUR once to advance the time by 1 hour. Press PRESET/TUNING/BAND A/B/C/D/E and hold to advance continuously. VOLUME DOWN UP STANDBY TIMER 3 While holding TIME ADJ pressed, press MIN and set the minute. PROGRAM B.BOOST MUSIC INPUT INPUT * Press MIN o
Resumen del contenido incluido en la página 20
Preparations and connections Speaker balance adjustment You can adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. This is important for the best performance of the built-in Dolby Pro Logic surround decoder. The adjustment of each speaker output level should be done at your listening position with the remote control. Otherwise, the result may not be satisfactory. 1 Turn on the power. 2 Turn down the volume to minimum. 3 Pres
