Manual de instrucciones de Fusion ElectronicsEN-AT1100

Resumen del contenido incluido en la página 1

ENCOUNTER
ACTIVE ENCLOSURES
EN-AT1100, EN-AT1120
Disclaimer
The provided self adhesive feet are intended for initial site placement only, and are not to be considered a suitable method
of securing the Active Enclosure. Always ensure the Active Enclosure is securely attached, to avoid movement.
FUSION accepts no responsibility for damage or injury in relation to inappropriate securing of this product
Product Specifications
EN-AT1100 EN-AT1120
Max Power Rating 300 Watts 360 Watts
Frequency Repso

Resumen del contenido incluido en la página 2

Wiring • Connect the ground wire to the vehicle first (clean dirt and paint to bare metal). • Connect the 12 volt (red wire) to the positive battery terminal. Make sure the fuse is close to the battery. • Connect the remote on (blue wire) • Connect the RCA cables if applicable, OR • Connect the speaker level wire by splicing into the headunits speaker wires. See Note 1 • Connect the remote level controller with the supplied lead. • Check all connections. • Finally, connect