Resumen del contenido incluido en la página 1
ADMINISTRATION
GUIDE
Cisco Small Business
SLM2008 8-Port Gigabit Smart Switch with PD and
AC Power
Resumen del contenido incluido en la página 2
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, CiscoIOS, Cisco Press, Cisco Systems, C
Resumen del contenido incluido en la página 3
Contents Chapter 1: Introduction 1 Chapter 2: Getting to Know the Cisco SLM2008 Switch 2 Front Panel 2 Back Panel 3 Side Panels 3 Chapter 3: Connecting the Cisco SLM2008 Switch 5 Placement Options 5 Desktop Option 5 Wall-Mount Option 6 Connecting the Cisco SLM2008 Switch to the Network 7 Chapter 4: Setting Up the Cisco SLM2008 Switch 9 Launching the Web-Based Configuration Utility 9 Navigating the Utility 10 System 11 Port 11 VLAN 11 Security 11 QoS 12 STP 12 Statistics 12 Multicast 13 Admin 1
Resumen del contenido incluido en la página 4
Contents Port 18 Configuring Port Settings 18 Configuring Static Link Aggregation 20 Configuring LACP Settings 21 Displaying LACP Status 23 VLAN 24 Configuring VLAN Settings 24 Configuring VLAN Port Settings 25 Security 27 Configuring 802.1X Settings 27 Configuring 802.1X Parameter 30 Configuring Static MAC Address 32 Configuring Management Access List 33 Configuring Storm Control 34 QoS 35 Configuring QoS Settings 35 STP 41 Configuring STP Settings 41 Displaying STP Status 43 Statistics 44 Di
Resumen del contenido incluido en la página 5
Contents Appendix A: Specifications 57 Appendix B: Where to Go From Here 60 Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide v
Resumen del contenido incluido en la página 6
1 Introduction The Cisco SLM2008 8-port Gigabit Smart Switch with PD and AC Power allows you to upgrade your existing network by replacing your current workgroup hub or switch. At the same time, you can configure advanced features for security, QoS, and Spanning Tree using its web-based configuration utility. The Cisco SLM2008 switch not only allows you to upgrade to gigabit speeds but also allows you to expand your network securely. The Gigabit Smart Switch with PD have virtual LAN (VLA
Resumen del contenido incluido en la página 7
2 Getting to Know the Cisco SLM2008 Switch This chapter describes the external features of the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following sections are included: • Front Panel, page 2 • Back Panel, page 3 • Side Panels, page 3 Front Panel The LEDs are located on the front panel of the switch. System—(Green) Lights up when the switch is powered on. 1-8—(Green) Each LED lights up when there is a connection made through its corresponding port. The LEDs flash wh
Resumen del contenido incluido en la página 8
Getting to Know the Cisco SLM2008 Switch Back Panel 2 Back Panel The Ethernet ports are located on the back panel of the switch. Port 1—This port supports the IEEE 802.3af Power-over-Ethernet (PoE) PD standard, which enables a system to receive data and supply electrical power to the switch over a standard twisted-pair cable in an Ethernet network. Any 802.3af- compliant PSE device, such as a PoE switch, can directly supply power to the switch. Simply connect a standard twisted-pair cable f
Resumen del contenido incluido en la página 9
Getting to Know the Cisco SLM2008 Switch Side Panels 2 Reset Button—The reset button can be used to reset or reboot the switch. • Reboot—If the button is pressed for less than 10 seconds, the switch will reboot. • Restore Factory Defaults—If the button is pressed for longer than 10 seconds, the switch settings will be restored to the factory defaults and the system reboots. NOTE The switch can only be configured using the web-based utility. If you cannot access the web-based utility becaus
Resumen del contenido incluido en la página 10
3 Connecting the Cisco SLM2008 Switch This chapter will guide you through the hardware installation for the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following sections are included: • Placement Options, page 5 • Connecting the Cisco SLM2008 Switch to the Network, page 7 Placement Options When you choose a location for the switch, observe the following guidelines: • Make sure that the switch is accessible and that the cables can be easily connected. • Keep cabling
Resumen del contenido incluido en la página 11
Connecting the Cisco SLM2008 Switch Placement Options 3 Wall-Mount Option NOTE You will need two suitable screws to mount the switch. Cisco is not responsible for damages incurred by insecure wall-mounting hardware. Suggested Mounting Hardware Suggested Mounting Hardware 4-5 mm 1-2 mm To mount the Cisco SLM2008 switch on a wall, follow these steps: STEP 1 Determine where you want to mount the switch. Ensure that the wall you use is smooth, flat, dry, and sturdy. Make sure the location is wit
Resumen del contenido incluido en la página 12
Connecting the Cisco SLM2008 Switch Connecting the Cisco SLM2008 Switch to the Network 3 STEP 3 Insert a screw into each hole and leave 3 mm of its head exposed. STEP 4 The wall-mount slots are two crisscross slots on the bottom panel of the switch. The wall-mount slots on the switch line up with the two screws. 2-1/2 Wall mount slots STEP 5 Maneuver the switch to insert the screws into the two slots. Connecting the Cisco SLM2008 Switch to the Network The diagram shown here is an example of a
Resumen del contenido incluido en la página 13
Connecting the Cisco SLM2008 Switch Connecting the Cisco SLM2008 Switch to the Network 3 NOTE When you connect your network devices, make sure you do not exceed the maximum cabling distance of 328 feet (100 meters). To connect network devices to the switch, follow these steps: STEP 1 Make sure all the devices you will connect to the switch are powered off. STEP 2 Connect a Category 5 network cable to one of the numbered ports on the switch. NOTE Reserve Port 1 if you are using a network devic
Resumen del contenido incluido en la página 14
4 Setting Up the Cisco SLM2008 Switch This chapter describes how to configure the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power using the web-based configuration utility. The following sections are included: • Launching the Web-Based Configuration Utility, page 9 • Navigating the Utility, page 10 Launching the Web-Based Configuration Utility To configure the Cisco SLM2008 switch, follow these steps to access the web- based configuration utility from your computer: STEP 1 Con
Resumen del contenido incluido en la página 15
Setting Up the Cisco SLM2008 Switch Navigating the Utility 4 Login Window STEP 6 If this is your first time accessing the web-based utility, follow these steps at the login window: a. Enter admin in the Username field b. Enter admin in the Password field. c. Click Log In. For security purposes, it is recommended that you later reset your password in the System > System Settings window. If your session times out, you will need to log back into the utility. Navigating the Utility The web-ba
Resumen del contenido incluido en la página 16
Setting Up the Cisco SLM2008 Switch Navigating the Utility 4 • QoS • STP • Statistics • Multicast • Admin System The System Settings window is the first window displayed when you log in. • System Settings—Displays a summary of switch information. Port This window allows you to manage port settings for the switch. • Port Settings—Manually configure the speed, duplex, and flow control settings used on specific ports. • Static Link Aggregation—Create multiple links between devices that work as
Resumen del contenido incluido en la página 17
Setting Up the Cisco SLM2008 Switch Navigating the Utility 4 • 802.1X Settings—Configure security settings that include 802.1X mode, RADIUS IP, Radius UDP port, key string or Admin State authentication mode. • 802.1X Parameter—Enable re-authentication and configure the re- authentication period or EAP timeout. • Static MAC Address—Allows you to configure a switch port with the MAC address of one or more devices that are authorized to access the network through that port. • Management Access
Resumen del contenido incluido en la página 18
Setting Up the Cisco SLM2008 Switch Navigating the Utility 4 Multicast This window displays the multicast settings for the switch. • IGMP Settings—Configure functions that include Enable IGMP Snooping, Enable Unregistered IP Multicast Flooding, and Enable IGMP Querying. Admin This window allows you to manage the switch. • Ping—Use to see if another site on the network can be reached. • Port Mirror—Mirror traffic from any source port to a target port for real- time analysis. • Factory Default—
Resumen del contenido incluido en la página 19
5 Advanced Configuration This chapter describes how to configure the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power using the web-based configuration utility. Setup The first window displayed upon login is the System Settings window. There are nine options displayed in the left panel: System, Port, VLAN, Security, QoS, STP, Statistics, Multicast, and Admin. Each option contains windows that will help you configure and manage the switch. Using the Help System The switch sof
Resumen del contenido incluido en la página 20
Advanced Configuration Using the Help System 5 Example with Help Example with Help Expanded Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 15
