Resumen del contenido incluido en la página 1
LevelOne
FSW-1611TX
16Port 10/100Mbps 13” Fast Ethernet Switch
USER'S GUIDE
Resumen del contenido incluido en la página 2
FCC WARNING This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference in a commercial environment. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CE MARK WARNING THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVI
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS UNPACKING INFORMATION-----------------------------------4 PRODUCT INTRODUCTION-------------------------------------5 FAST ETHERNET TECHNOLOGY-------------------------------------------- 5 SWITCHING TECHNOLOGY----------------------------------------------------5 FEATURES---------------------------------------------------------------------------6 THE FRONT PANEL---------------------------------------------------------------8 CABLING-----------------------------------------
Resumen del contenido incluido en la página 4
A. UNPACKING INFORMATION Thank you for purchasing LevelOne FSW-1611TX 16Port 10/100Mbps 13” Fast Ethernet Switch. Before continuing, please check the contents of the product package. This product package should contain the following items: Ø One LevelOne FSW-1611TX 16Port 10/100Mbps 13” Fast Ethernet Switch Ø One Power Cord Ø Four Rubber Feet (for desktop placement) Ø One Rackmount Kit Ø Four Stackable stand Ø User’s Guide If anything is missing, please contact your place of purch
Resumen del contenido incluido en la página 5
B. PRODUCT INTRODUCTION This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-T (Fast Eth
Resumen del contenido incluido en la página 6
segments. The switch, without interfering with any other segments, automatically forwards traffic that needs to go from one segment to another. By doing this the total network capacity is multiplied, while still maintaining the same network cabling and adapter cards. For Fast Ethernet networks, a switch is an effective way of eliminating problems of chaining hubs beyond the “two-repeater limit.” A switch can be used to split parts of the network into different collision domains, making
Resumen del contenido incluido en la página 7
The Switches are a perfect choice for site planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switches now, and change adapters and hubs anytime later without needing to change the Switches or reconfigure the network. The Switches combine dynamic memory allocation with store-and- forward switching to ensure that the buffer is effectively allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee agai
Resumen del contenido incluido en la página 8
The Front Panel LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch Port Speeds 100/10Mbps TP Ports Each 100/10Mbps TP port provides an Auto-Negotiation function that senses for the attached device's maximum operating speed and automatically sets the Switch to operate at that speed. Each TP port uses RJ-45 connector that allows network TP cables to be easily attached or removed. Users only need to connect a network device into any TP port and the Switch will do the rest. Crosso
Resumen del contenido incluido en la página 9
cabling. Status LEDs This LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch comes with a complete range of LEDs. The table below lists each LED’s name, color and a brief description of its function. • One for power On/Off • One per port for Link/Activity • One per port for Full-Duplex/Collision NAME COLOR FUNCTION PWR Green • Lit: Power "On" LINK/ACT Green • Lit: When the port has a valid physical connection (Link) with another device. • Blinks: When the port is sending or
Resumen del contenido incluido en la página 10
Note: To reset the switch, Remove the power cord and re-attach it . a) The switch must be reset when the MAC Address table needs to be rebuilt. b) The switch must be reset when the fiber port Full/Half – Duplex modes are changed. 10
Resumen del contenido incluido en la página 11
C. INSTALLATION This LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch is "Plug & Play." They do NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. TO LOCATE THE Switch ON A DESKTOP a) Attach the four rubber feet included in the product package to the bottom of the Switch, one in each corner. b) Place the Switch on a clean, flat desk or table top close to a power outlet. C)
Resumen del contenido incluido en la página 12
2. Use the other provided screws to secure the Switch to the rack. 12
Resumen del contenido incluido en la página 13
D. HELPFUL SUGGESTIONS Prior to Installation Before installing this LevelOne FSW-1611TX 16Port 10/100Mbps 13” Fast Ethernet Switch and connecting it to network devices, it is important to plan the network's layout. Things you should consider include: ? Dedicated Bandwidth: File servers and other high-traffic hardware improve their performance if they have their own dedicated 10Mbps or 100Mbps bandwidth. ? Full-Duplex: Determine which devices support Full-Duplex connections. ?
Resumen del contenido incluido en la página 14
they can receive data. • In Full-Duplex mode data can be transmitted and received at the same time. However: a) Full-Duplex transmission is only possible between two devices with a dedicated link (e.g., Switch-Switch, Switch-PC) b) Both devices must have Full-Duplex capability c) Both devices must be set to Full-Duplex (e.g. Auto- Negotiation – Auto-Negotiation, Non-Auto-Negotiation to Non- Auto-Negotiation) • The 100BASE-TX/10BASE-T ports on the Switch detect and set the line's ope
Resumen del contenido incluido en la página 15
10Mbps, with Auto-Negotiation 20Mbps Bandwidth (10BASE-T, Full-Duplex) F Helpful Warning: If the attached device is set to a fixed mode (ex: Forced Full-Duplex) it will not operate as an Auto-Negotiation device. MAC Address Table Every Ethernet data packet includes both source and destination addresses. This 6-byte ID is called the MAC (Media Access Control) Address. The Switch can automatically learn and store MAC addresses. However, the MAC address table is volatile: it disappears
Resumen del contenido incluido en la página 16
E. Troubleshooting I. Link LED does not lit after cable is connected to the port. Ø Verify that the other end of the cable is connected to a device that is powered on and on-line. Ø For TP cable connection to another Switch or Hub, verify that only one end of the cable is connected to a “Crossover” port. II. 100BASE-TX port Link LED is lit, Collision LED is blinking, but traffic is irregular. Ø Check that the attached device is not set to dedicated Full-Duplex. (Some devices use a
Resumen del contenido incluido en la página 17
ALWAYS CHECK THAT: Ø CABLE AND LINK DISTANCES ARE WITHIN THE NETWORK'S SPECIFICATIONS Ø OVERALL NETWORK DIAMETERS ARE WITHIN THE NETWORK'S SPECIFICATIONS 17
Resumen del contenido incluido en la página 18
F. PRODUCT SPECIFICATIONS Models FSW-1611TX Standards • 100BASE-TX IEEE 802.3u • 10BASE-T IEEE 802.3 • Sixteen (16) 100BASE-TX/10BASE-T Ports • 100BASE-TX Category 5 TP Media Support • 10BASE-T Category 3, 4 or 5 TP • 100BASE-TX - 200/100Mbps via Auto-Negotiation Bandwidth • 10BASE-T - 20/10Mbps via Auto-Negotiation • 148,800 packets/second per port @ 100Mbps, max. Forwarding/Filtering • 14,880 packets/second per port @ 10Mbps, max. Rate • 10 μsec @100Mbps, minimum Latency •
