Resumen del contenido incluido en la página 1
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 1
User Manual (Part 2)
2.4 GHz Cordless
Telephone E2115
with Caller ID & Call Waiting
Resumen del contenido incluido en la página 2
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 2 You must install and See page 7 charge batteries before STOP! for easy instructions. using the telephone. For customer service or product Please also read information, visit our web site at Important Product Information www.telephones.att.com Enclosed in product package. or call 1-800-222-3111. Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanc
Resumen del contenido incluido en la página 3
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 1 User Manual (Part 2) 2.4 GHz Cordless Telephone E2115 with Caller ID & Call Waiting Table of contents Getting Started Caller ID Logs Quick reference guide ........................2 How Caller ID works .......................19 Parts checklist.......................................4 To review your call log.....................20 Before you begin ..................................5 Appendix Telephone base installation................6 Scr
Resumen del contenido incluido en la página 4
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 2 Getting Started Quick reference guide Handset Select/Menu V CID Press to display menu, or to select Press to scroll down in menus. highlighted item from menu. Press when phone is not in use to display Caller ID information (see page 20). While entering names, press to move the cursor ^ DIR to the left. Press to scroll up in menus. Press when phone is not in use to display phone book entries (see page 17). While entering names, press to
Resumen del contenido incluido en la página 5
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 3 Getting Started Quick reference guide Telephone Base IN USE On when handset is in use. Flashes when another phone is in use on the same line. CHARGING On when handset batteries are charging. NEW MESSAGE Flashes when you have new voice mail (requires voice mail service from your local telephone company). HANDSET LOCATOR Press to locate handset if lost (see page 12). 3
Resumen del contenido incluido en la página 6
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 4 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Belt clip Battery Telephone base Telephone handset Power adapter Long telephone line cord Short telephone line cord 4
Resumen del contenido incluido en la página 7
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 5 Getting Started Before you begin About Caller Identification Telephone operating range Caller ID with Call Waiting features in This cordless telephone operates with this telephone let you see who’s calling the maximum power allowed by the before you answer the phone, even Federal Communications Commission when you’re on another call. These (FCC). Even so, this handset and base features require services provided by can communicate over o
Resumen del contenido incluido en la página 8
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 6 Getting Started Telephone base installation Install the telephone base as shown below. Choose a base location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug power cord transformer Plug long telephone line cord into into electrical outlet telephone jack NOTE: Use only the power cord supplied with this product. If you need a replacement,
Resumen del contenido incluido en la página 9
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 7 Getting Started Battery installation & charging After installation, place the handset in the base and allow to charge for 15 hours before use. You can keep batteries charged by returning the handset to the base after each use. When batteries are fully depleted, a recharge takes about 10 hours. LOW BATTERY Low battery indicator Return handset to base to recharge when this symbol flashes. (Handset will beep when battery is low.) Press coi
Resumen del contenido incluido en la página 10
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 8 Getting Started Wall mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Connect telephone line cord and Swivel wall mount down AC adapter as shown on page 6. and lock in place Press notch and pull to open hinged wall mount. Press and s
Resumen del contenido incluido en la página 11
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap) 9
Resumen del contenido incluido en la página 12
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 10 Telephone Operation Elapsed time Basic operation Making and answering calls PHONE 00:00:12 To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER, then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial. Press DELETE or CLEAR at any time to make corrections as you are entering numbers. The screen dis
Resumen del contenido incluido en la página 13
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 11 Telephone Operation Options while on calls Volume control Press VOLUME buttons on the side of the handset to Volume adjust listening volume. Each button press raises or lowers volume by one level. Silence ringer When you change the volume level, the new setting becomes the default. The new volume level will be Flash applied each time you use the handset, speakerphone or headset. Tone Call waiting If you have Call Waiting service, you
Resumen del contenido incluido en la página 14
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 12 Telephone Operation Handset locator If you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds to help you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button at the handset, or press HANDSET LOCATOR at the base. 12
Resumen del contenido incluido en la página 15
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 13 Telephone Operation Highlighted menu item Handset settings At the feature menu you can change settings to > DIRECTORY customize how the telephone works. CALL LOG Press MENU, then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > character. Press SELECT to select the highlighted item. Press OFF at any time to cancel an operation, back up to
Resumen del contenido incluido en la página 16
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 14 Telephone Operation Handset settings Handset name HANDSET NAME AT&T_ At this menu you can customize the name that appears on the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 16 to enter letters). Press SELECT to confirm. Language LANGUAGE At this menu you can select the language used in all ENGLISH menus and screen displays. Us
Resumen del contenido incluido en la página 17
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 15 Phonebook Memory capacity Pat Williams The phonebook directory can store up to 50 entries. 555-1234 Each entry can contain a number up to 32 digits, and a name up to 16 letters long. A convenient search feature can help you find and dial numbers quickly (see page 17). Timeouts and error messages If you pause for too long while making an entry, the procedure will time out and you will have to begin again. If all memory locations are in
Resumen del contenido incluido en la página 18
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:27 AM Page 16 Phonebook AT&T New phonebook entries To create a new phonebook entry Press MENU twice to select DIRECTORY. Press V to highlight STORE. Press SELECT, then enter the telephone number when prompted. > DIRECTORY CALL LOG Use the dial pad to enter up to 32 digits, then press SELECT. You will be notified if the number is already in your phonebook. To insert a number from your redial list, press REDIAL, then ^V to find the number, then pres
Resumen del contenido incluido en la página 19
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:27 AM Page 17 Phonebook AT&T Phonebook search Press DIR to display the first listing in the phonebook. You can then use the up/down arrows to browse through the phonebook, or search to find a specific entry. Press OFF at any time to exit the directory. Andrew 555-6789 To browse through the directory To browse, press ^ or V to scroll through all entries one by one. Entries will be displayed alphabeti- cally by the first letter in the name. Barbara To
Resumen del contenido incluido en la página 20
91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:27 AM Page 18 Phonebook AT&T To dial, change or delete entries To dial a number When any phonebook entry is displayed, press PHONE (or SPEAKER) to dial the displayed number. Andrew 555-6789 To delete an entry When any phonebook entry is displayed, press DELETE to delete the displayed entry from the phonebook. Once deleted, an entry cannot be recovered. To change a listing EDIT NUMBER 555-6789_ When any phonebook entry is displayed, press SELECT to
