Resumen del contenido incluido en la página 1
User’s Manual
M40/M46
Resumen del contenido incluido en la página 2
Index Declaration of conformity ............................................................................................................................. English-1 Important Information ................................................................................................................................... English-2 Warning, Caution ......................................................................................................................................... English-2 Dec
Resumen del contenido incluido en la página 3
DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Computer Monitor Equipment Classif
Resumen del contenido incluido en la página 4
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Resumen del contenido incluido en la página 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE Immediately unplug your monitor from the wall outlet and refer FOLLOWING WHEN SETTING UP AND USING servicing to qualified service personnel under the following THE MULTI-FUNCTION MONITOR: conditions: • DO NOT OPEN THE MONITOR. There are no user • When the power supply cord or plug is damaged. serviceable parts inside and opening or removing covers • If liquid has been spilled, or objects have fallen into t
Resumen del contenido incluido en la página 6
Contents Your new MULTEOS M40/MULTEOS M46 monitor box* should contain the following: • LCD monitor • Clamp x 3 • Power Cord • Screw (M4 x 8) x 5 •Video Signal Cable • CD-ROM • User’s Manual • Main switch cover •Wireless Remote Control and AA Batteries Video Signal Cable (D-SUB to D-SUB Cable) Power Cord Main switch cover Screw (M4 x 8) x 5 Clamp x 3 VGA VGA VGA RGB/HV RGB/HV RGB/HV O OPTION OPTION PTION SIZE SIZE 1 1 4 4 7 7 DISPLA DISPLA A AY Y CD-ROM User’s Manual Wireless Remote Control and A
Resumen del contenido incluido en la página 7
Parts Name and Functions Control Panel 9 ON OFF 10 1 POWER button ( ) 7 DOWN ( ) button Switches the power on/off. See also page 21. Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. 2 MUTE button Switches the audio mute ON/OFF. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off. 3 INPUT button Acts as EXIT button to move to previous menu with OSM Acts as SET button within OSM menu.
Resumen del contenido incluido en la página 8
Terminal Panel In Out 1 AC IN connector 9 AUDIO OUT* Connects with the supplied power cord. To output the audio signal from the AUDIO IN 1, 2, 3, HDMI, and TV jack to an external device (stereo receiver, amplifier, 2 DVI IN (DVI-D) etc.). To input digital RGB signals from a computer or HDTV 10 VIDEO INPUT/OUTPUT Connector* device having a digital RGB output. VIDEO IN connector (BNC and RCA): To input a * This connector does not support analog input. composite video signal. BNC and RCA connectors
Resumen del contenido incluido en la página 9
Wireless Remote Control 7 KEYPAD Press to set and change passwords, change channel and set REMOTE ID. 8 ENT button Sets channels. 9 DISPLAY button Turns on/off the information OSM. See page 22. 10 MENU button Turns on/off the menu mode. 11 AUTO SETUP button Enters auto setup menu. See page 24. 12 EXIT button Turns to previous menu with OSM menu. UP/DOWN button 13 Acts as button to move the highlighted area up or down to select the adjustment with OSM menu. Small screen which adjusted “PIP” mo
Resumen del contenido incluido en la página 10
22 REMOTE ID button Operating Range for the Remote Activates REMOTE ID function. Control 23 MTS button* Point the top of the remote control toward the LCD monitor’s Multichannel television sound. remote sensor during button operation. 24 SLEEP button* Use the remote control within a distance of about 7 m/23 ft. Sets power off timer. from the front of the LCD monitor’s remote control sensor and at a horizontal and vertical angle of within 30° within a 25 GUIDE button* distance of about 3.5 m/10
Resumen del contenido incluido en la página 11
Installation Mounting DO NOT mount the monitor yourself. Please ask dealer. For proper installation it is strongly recommended to use a trained, qualified technician. Please inspect the location where the unit is to be mounted. Mounting on wall or ceiling is the customer’s responsibility. Not all walls or ceilings are capable of supporting the weight of the unit. Product warranty does not cover damage caused by improper installation, remodelling, or natural disasters. Failure to comply with thes
Resumen del contenido incluido en la página 12
2. Stand Removal Attaching Mounting Accessories To detach stand, place the monitor face down as shown in The display is designed for use with the VESA mounting Figure 2. Remove the screws from the back of the stand as system. indicated in Figure 3. Remove the 2 additional screws 1. Attach Mounting Accessories located at the bottom of the stand (Figure 4). Lift up stand to remove after stand is removed, replace the screws into the Mounting accessories can be attached while the monitor original ho
Resumen del contenido incluido en la página 13
3. Ventilation Requirements 5. Prevent Tipping When mounting in an enclosure or in a recessed area allow When using the display with the Tabletop Stand fasten the heat to disperse, leave space between surrounding the LCD to a wall using a cord or chain that can support the monitor and surrounding objects allow heat to disperse, as weight of the monitor (approx. M40: 32.6Kg/M46: 39.3Kg) in shown in Figure 6. order to prevent the monitor from falling. Fasten the cord or chain to the monitor using
Resumen del contenido incluido en la página 14
Setup NEC recommends the following battery use: 1. Determine the installation location • Place “AA” size batteries matching the (+) and (-) signs CAUTION: Installing your LCD display must be done by a on each battery to the (+) and (-) signs of the battery qualified technician. Contact your dealer for compartment. more information. • Do not mix battery brands. CAUTION: MOVING OR INSTALLING THE LCD MONITOR • Do not combine new and old batteries. This can shorten MUST BE DONE BY TWO OR MORE PEOPLE
Resumen del contenido incluido en la página 15
5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make adjustments when adjustment of the volume is required. 8. Adjust the screen (See pages 24 and 25) Make adjustments of the screen display position when necessary. 9. Adjust the image (See page 24) Make adjustments such as brightness or contrast w
Resumen del contenido incluido en la página 16
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and pixel clock over 165MHz may not display an image correctly. Your LCD monitor displays proper image adjusting the factory preset timing signal automatical
Resumen del contenido incluido en la página 17
Connecting to a Macintosh Computer Connecting your Macintosh computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards or drivers may not display images correctly. Connect the LCD Monitor to Macintosh •To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). •To connect the RGB/HV IN connector (BNC) on the LCD monitor, use the signal cable available s
Resumen del contenido incluido en la página 18
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The DVI IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. •To maintain display quality, use a cable with a quality prescribed by DVI standards. • The AUDIO IN 1, 2 and 3 can be used for audio input. For connectio
Resumen del contenido incluido en la página 19
Connecting a DVD Player with component out* Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player •To connect the DVD/HD IN connector (RCA) on the LCD monitor, use a separately available RCA connector cable. Some DVD players may have different connectors such as DVI-D connector. Select [DVI/HD] mode from the “DVI MODE” menu when you connect a DVI-D connector. Mode s
Resumen del contenido incluido en la página 20
Connecting a DVD Player with HDMI out* Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Select [HDMI] from the AUDIO INPUT button. Connect the LCD Monitor to a DVD Player • Please use the HDMI cable with HDMI logo. •You may need some seconds to show the signal. •We do not support PC-DVI signal. LCD monitor To HDMI output HDMI connector *: The product you purchased may not have this feature. Connectin
