Resumen del contenido incluido en la página 1
EXS 2010 6/28/00 4:36 PM Page 1
Introduction
Thank you for choosing the Uniden EXS 2010 cordless telephone.
This phone is designed for reliability, long life, and outstanding
performance utilizing the latest in 900 MHz Digital Spread Spectrum
technology.
Note: Some illustrations in this manual may differ from the
actual unit for explanation purposes.
Features
• 900 MHz Digital Spread Spectrum Technology
• 10 Memory Dial Locations
• 32 Digit Redial
• Flash and Pause
• Pulse / Tone Dialing
•
Resumen del contenido incluido en la página 2
EXS 2010 6/28/00 4:36 PM Page 3 Controls and functions 1. Handset antenna 21. Handset retainer clip 2. Headset jack cover 22. Base charging contacts 3. Handset battery compartment 23. Base antenna 4. Handset ring switch 24. Status LED 5. Handset speaker 25. Power LED 6. Talk/Batt LED 26. Page/Find key 1 7. Talk key 27. Pulse-Tone switch 8. Volume down key 28. DC power input 9. Mute key 29. Phone jack 2 5 10. key 11. Channel key 12. Pause key 6 talk batt 13. Handset microphone DIGITAL SPREAD S
Resumen del contenido incluido en la página 3
EXS 2010 6/28/00 4:12 PM Page 5 Getting Started Contents Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Basics Read this first..........................................................2 Step 1: Checking the package contents...............3 Step 2: Setting up the base unit ...........................4 Mounting the base unit on a wall ...........7 Step 3: Installing the handset battery pack..........9 Automatic di
Resumen del contenido incluido en la página 4
900MHz P E A D PEC DIGITAL S R S TRAM status power page/find EXS 2010 6/28/00 4:12 PM Page 6 Read this first This cordless telephone must be set up before use. Follow these steps; Step 1 (page 3) Unpack and check the telephone and accessories. Step 2 (page 4 to 8) Next, choose the best location to set up the base unit. Base unit Step 3 (page 9 to 10) Then, insert the battery pack into the handset. You must charge the battery pack for 15 - 20 hours before using the phone. Handset About the di
Resumen del contenido incluido en la página 5
900MHz DIGITAL SPR EA D PECTRAM S status power page/find EXS 2010 6/28/00 4:12 PM Page 7 Checking the package contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below). • Base unit • Handset • AC adapter (AD-310) • Rechargeable • Telephone line • Wall mount adapter battery pack cord (2) (BT-905) • Memo sticker • Beltclip • This Owner's Manual • Precautions and Important Safety Instruc
Resumen del contenido incluido en la página 6
EXS 2010 6/28/00 4:12 PM Page 8 Setting up the base unit Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider: Avoid heat sources, such as Avoid noise sources such as a window radiators, air ducts, and sunlight b
Resumen del contenido incluido en la página 7
900MHz DIGITAL S P R E A D SPECTRAM status message page/find EXS 2010 6/28/00 4:12 PM Page 9 Connect the base unit If you want to install the base unit on the wall, see page 7. Route the cord. Place the power cord so it 2 does not create a trip To AC outlet hazard, or where it could become chafed and create a fire or electrical hazard. To DC IN 9V AC adapter 1 (supplied) To telephone outlet To TEL LINE Telephone line cord (supplied) 1 Connect the telephone line cord to the TEL LINE jack and t
Resumen del contenido incluido en la página 8
EXS 2010 6/28/00 4:12 PM Page 10 Use only the supplied AD-310 AC adapter. Do not use any other AC Polarity of the plug adapter. Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. Modular If your telephone outlet isn't modular, contact your telephone company for assistance. Choose the dialing mode PULSE TONE Depending on your dialing system, set the PULSE-TONE switch as follows: If your dialing system i
Resumen del contenido incluido en la página 9
EXS 2010 6/28/00 4:12 PM Page 11 Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount 1 adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet. 4 Wrap the AC adapter 2 - 7 cord inside the molded wiring 6 channel. Then wrap 2 the cord around the strain relief notch. 4
Resumen del contenido incluido en la página 10
900MHz DIGITAL S P R E A D SPECTRAM EXS 2010 6/28/00 4:12 PM Page 12 8 On the base unit, pull the Handset retainer handset retainer out of the slot. Rotate it clockwise 180 degrees. 9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is If the handset beltclip is up and the oval is down. The attached, you cannot retainer holds the handset charge the handset facing in place. forward when the phone is mounted on the wall (See page 20). Direct wa
Resumen del contenido incluido en la página 11
900MHz DIGITAL SP R E A D SPECTRAM status power page/find EXS 2010 6/28/00 4:12 PM Page 13 Installing the handset battery pack Charge the battery pack for 15 - 20 hours before you start using your phone. 1 Press the battery cover release. 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery Black pack into the battery compartment. Red 3 Slide the battery cover forward until it snaps into place. 4 Place the handset on the base. 5 Make su
Resumen del contenido incluido en la página 12
900MHz DIGITAL S R E A D S ECTRAM P P status power page/find EXS 2010 6/28/00 4:12 PM Page 14 Battery use time (per charge) From fully charged • Six hours coutinuous use. • Ten days when the handset is in the standby mode. Even when the battery pack is not being used, it When the battery charge becomes low will gradually discharge When the voltage of battery pack in the handset is very low and over a long period. For needs to be charged, the phone is programmed to eliminate optimum performanc
Resumen del contenido incluido en la página 13
EXS 2010 6/28/00 4:12 PM Page 15 Making a call talk 1 Press . Listen for dial tone. 2 Dial the phone number. 3 To hang up, press or retur talk n the handset to the base. If the talk/batt LED does not stop flashing after pressing the key talk , place the handset on the base for at least five seconds and make a call again. Other Operations To Do this To adjust the ear speaker volume Press or during the call. • ª tone To temporarily switch to tone dial Pre
Resumen del contenido incluido en la página 14
EXS 2010 6/28/00 4:12 PM Page 16 Receiving a call Handset on the base 1 Phone rings. The talk/batt LED blinks. 2 Pick up the handset and begin speaking. When you receive a call during a page or memory dialing operation, press 3 To hang up, press or retur talk n the talk to answer the call. handset to the base. Handset off the base 1 Phone rings. The talk/batt LED blinks. 2 Press or any key (except talk mute ) and begin speaking. 3 To hang up, press or return
Resumen del contenido incluido en la página 15
ringer off on ringer off on EXS 2010 6/28/00 4:12 PM Page 17 Flash and Call Waiting If you have “Call Waiting” service and a call waiting tone sounds while you are on a call, press to accept the waiting call. flash There is a short pause, then you will hear flash the new caller. To return to the original caller, press again. flash Adjusting the ringer and earpiece volume Ringer tone/volume The phone has four types of ringer tone and volume combinations. In standby mode, p
Resumen del contenido incluido en la página 16
EXS 2010 6/28/00 4:12 PM Page 18 Redialing a call The last phone number dialed can be quickly redialed. 1 Press . The talk talk/batt LED lights. redial 2 Press . talk 3 To hang up, press or place the If the recently dialed handset on the base. number exceeds 32 digits, only the first 32 digits can be redialed. 14
Resumen del contenido incluido en la página 17
EXS 2010 6/28/00 4:12 PM Page 19 Mute You can turn off the handset microphone and temporarily mute the ringer. When speaking on the handset 1 Press during a telephone call. mute The talk/batt LED flashes. The other party will not be able to hear you although you can hear them. talk 2 To cancel mute, press or talk mute again. When the phone is ringing Press when the phone rings. mute The ringer sound turns off. You may still press to answer the talk call.
Resumen del contenido incluido en la página 18
900MHz DIGITAL S PREA D SPECTRAM status power page/find EXS 2010 6/28/00 4:12 PM Page 20 Using page feature To locate the handset (while it’s off the page/find base), press on the base. The handset beeps for 5 seconds. page/find Press and hold for more than 2 seconds to page the handset for a minute. Press any key or return the handset to the base to cancel the page. page/find If you hold down for more than a minute, page/find the handset beeps
Resumen del contenido incluido en la página 19
EXS 2010 6/28/00 4:12 PM Page 21 Storing phone numbers Your EXS 2010 stores up to 10 numbers in the handset. mem 1 Press while in standby mode. The talk/batt LED flashes. 2 Dial the number you wish to store (up to 20 digits). You must press a key within 20 seconds, or the 3 Press again. mem phone will return to standby. If you return the 4 Press a number key (0 - 9) to select handset in the cradle, the the memory location where you phone will also return to standby. wish t
Resumen del contenido incluido en la página 20
EXS 2010 6/28/00 4:12 PM Page 22 Making calls with memory dialing Memory dialing talk 1 Press . The talk/batt LED lights. mem 2 Press . If you select a memory location that does not 3 Enter a number (0 - 9) to select the have a stored number, the memory location you wish to dial. handset will beep rapidly. Press to return to talk 4 To hang up, press or retur talk n the standby. handset to the base. Chain dialing On certain occasions after dialing a number,
