Resumen del contenido incluido en la página 1
Prestige 2000W_V2
VoIP Wi-Fi Phone
Quick Start Guide
Version WV.00.01
4/2005
Resumen del contenido incluido en la página 2
Prestige 2000W_V2 Quick Start Guide Overview The Prestige 2000W_V2 is a wireless Voice over IP (VoIP) telephone. It combines the benefits of Internet telephony, like cheaper calls, with mobility. Make and receive calls as long you are within range of an IEEE 802.11b or IEEE 802.11g wireless network. This guide covers how to configure and use your Prestige to make phone calls through the Internet. See the User’s Guide for more information on all features. Note: You should have Internet a
Resumen del contenido incluido en la página 3
Prestige 2000W_V2 Quick Start Guide NAME DESCRIPTION 1 LCD Screen Use this screen to display information and navigate the phone’s menus. 2 Left Key Use the Left key to open the on-screen menus and select options. 3 Right Key Use the Right key to return to the previous menu. It is also a shortcut to the phone book. 4 Arrow Keys Use the arrow keys to navigate between menus and move the cursor. Use the left arrow key to clear text in an editable field. 5 OK Key Use this key to select menu options
Resumen del contenido incluido en la página 4
Prestige 2000W_V2 Quick Start Guide 1 Charging Your Phone Do the following to charge the Prestige for use. 1 Remove the battery cover. Press the silver 2 Insert the battery. With the battery’s CE label facing button on the back of the Prestige and slide the up, put the end with the contacts in first and press the battery cover with your other hand. battery down into place. 3 Place the battery cover back on. Slide the 4 Remove the gray rubber cover from the bottom of cover towards the top un
Resumen del contenido incluido en la página 5
Prestige 2000W_V2 Quick Start Guide 2 Connecting to a Wireless Network Press the Power/End key for two seconds to turn on the Prestige. The Prestige searches for the available wireless network with the best signal. It then restarts and attempts to connect to the wireless network. If the LCD screen displays Not Registered, the Prestige is connected to the Internet 12:00 and you can skip to Section 4. ZyXEL Note: If the LCD screen displays Registered, skip to Section 5. Not registered If any
Resumen del contenido incluido en la página 6
Prestige 2000W_V2 Quick Start Guide 2.1 Setting the Prestige to Use a WEP Key WEP (Wired Equivalent Privacy) encryption scrambles wireless communications to keep them private. Do the following if you were given a WEP key to use, otherwise skip to Section 2.2. 1 Use the down arrow key to scroll to WEP Select and press the OK key. 6. WEP Select 7. Profiles 8. Auth Type Select Back 2 Scroll to the length of WEP keys (64-bit or 128-bit) that the wireless network [2] 64bit u
Resumen del contenido incluido en la página 7
Prestige 2000W_V2 Quick Start Guide 8 Scroll to Key Select and press the OK key. 11. Key Select 12. Profiles 13. Auth Type Select Back 9 Use the down arrow key and the OK key to select the key that the wireless Key 1 network is using. Key 2 Key 3 Select Back 2.2 Restarting Your Prestige Press the Right key twice to save your settings and return to the main screen. An hourglass appears on the LCD screen and the Prestige restarts. Note: If the LCD scre
Resumen del contenido incluido en la página 8
Prestige 2000W_V2 Quick Start Guide 2 Use the down arrow key to scroll to Net Settings and press the Left key). 4. Net Settings 5. SIP Settings 6. Settings Select Back 3 Scroll to Network Mode and press the OK key. 1. Network Mode If you were given an IP address and subnet mask, go to Section 3.1. If you were given a user name and password for Internet access, go to Section 2. IP Address 3.2. 3. Subnet Mask Select Back 3.1 Fixed IP With this option you
Resumen del contenido incluido en la página 9
Prestige 2000W_V2 Quick Start Guide 5 Use the keypad to enter your subnet mask. Use the Power/End key to clear the Subnet Mask default text and remove typos. Press the OK key when you are done. 255.255.255.0 1 Ok Aa @ Clear 6 Scroll to Gateway and press the OK key. 4. Gateway 1. Network Mode 2. IP Address Select Back 7 Use the keypad to enter the IP address of your gateway. Use the Power/End Gateway key to clear the default text and remove typos. Press the OK key
Resumen del contenido incluido en la página 10
Prestige 2000W_V2 Quick Start Guide 4 Use the keypad to enter your PPPoE name. Use the Power/End key to clear PPPoE Name the default text and remove typos. You may need multiple keypad presses to my_username enter letters. For example, to enter a lowercase “b”, press the down arrow key to select lowercase mode (a), then press the “2” key twice. a Ok A 1@ Clear 5 Press the OK key when you are done. 6 Scroll to PPPoE Pwd and press the OK key. 3. PPPoE Pwd 1. Network Mode 2. PPPo
Resumen del contenido incluido en la página 11
Prestige 2000W_V2 Quick Start Guide 3 Scroll to Registrar and press the OK key. 1. Registrar 2. OutboundProxy 3. Proxy Server Select Back 4 Scroll to Registrar IP and press the OK key. 1. Registrar IP 2. Port 3. Expiry Time Select Back 5 You will enter your registrar server’s IP address or domain name here. Registrar IP The bottom center of the screen shows the keypad mode Aa1@, with the A mysip.proxy.com mode highlighted. Use the up and down arrows
Resumen del contenido incluido en la página 12
Prestige 2000W_V2 Quick Start Guide 10 Scroll to Expiry Time and press the OK key. 3. Expiry Time 1. Registrar IP 2. Port Select Back 11 Use the keypad to enter the expiration time if you were given one to use. Use Expiry Time the Power/End key to clear the default text and remove typos. Leave the 300 default expiration time if you were not given one to use. Press the OK key when you are done. 1 Ok Aa @ Clear 12 Stay in the SIP Settings menu and contin
Resumen del contenido incluido en la página 13
Prestige 2000W_V2 Quick Start Guide 4 Scroll to Port and press the OK key. 2. Port 1. Proxy IP Select Back 5 Use the keypad to enter the SIP outbound proxy server’s listening port number. Port Use the Power/End key to clear the default text and remove typos. Leave the 5060 default port number if you were not given one to use. Press the OK key when you are done. 1 Ok Aa @ Clear 4.3 Configuring Your Proxy Server Settings Configure Proxy Server settings to have
Resumen del contenido incluido en la página 14
Prestige 2000W_V2 Quick Start Guide 4.4 Configuring Your User Account Settings When you registered for your voice account, you should have been given a telephone number, user name and password. Do the following to enter them into the Prestige. 1 Use the down arrow key to scroll to User Account and press the OK key. 4. User Account 1. Registrar 2. OutboundProxy Select Back 2 Scroll to Phone Number and press the OK key. 1. Phone Number 2. Username 3. User Pwd Select
Resumen del contenido incluido en la página 15
Prestige 2000W_V2 Quick Start Guide 6 Scroll to User Pwd and press the OK key. 3. User Pwd 1. Phone Number 2. Username Select Back 7 Select a keypad mode and use the keypad to enter your password. User Pwd Press the OK key when you are done. my_password 8 Press the Right key three times to save your settings and return to the main screen. An hourglass appears on the LCD screen and the Prestige restarts. a Ok A 1@ Clear 5 Phonebook Use the phonebook feature to
Resumen del contenido incluido en la página 16
Prestige 2000W_V2 Quick Start Guide 1 In the main screen, press the Left key to enter the menus. 12:00 ZyXEL Registered Menu Names 2 Use the down arrow key to scroll to Phonebook and press the OK key. 3. Phonebook 4. Net Settings 5. SIP Settings Select Back 3 Use the down arrow key to scroll to Add Entry and press the OK key. 2. Add Entry 3. Erase 1. Search Select Back 4 Select a keypad mode and use the keypad to enter the callee’s name.
Resumen del contenido incluido en la página 17
Prestige 2000W_V2 Quick Start Guide 7 Select a keypad mode and use the keypad to enter the callee’s listening port Port: number. Use the Power/End key to clear the default text and remove typos. Leave this blank if you will use the SIP proxy server to call this number or you were not given a port number to use. Press the OK key when you are done. 1 Ok Aa @ Clear 8 Select Proxy if calls to this party use your SIP account. Proxy Select P2P if calls to this party use a different SI
Resumen del contenido incluido en la página 18
Prestige 2000W_V2 Quick Start Guide 1 Make sure your Prestige is connected to the wireless LAN and record its IP address (you can use the Information menu to check your phone’s IP address). 2 Launch your web browser. 3 Type "http://" as the URL. Where “IP address” is the Prestige’s IP address. 4 Enter your user name and password and click OK to login. • For user-level access: Type the default user ame: admin and password: 1234 the first time you login. • For administrator acces
Resumen del contenido incluido en la página 19
Prestige 2000W_V2 Quick Start Guide PROBLEM CORRECTIVE ACTION “Net Fail! The Prestige failed to obtain an IP address from a DHCP server. (DHCP)” Make sure your wireless LAN settings are correct. You may need to select a different displays. wireless network or make sure your wireless network’s DHCP server is operating properly. Restart the Prestige. “Net Fail! The Prestige failed to obtain an IP address from the ISP. (PPPoE)” Make sure your PPPoE settings are correct and restart the Prestige.
