Manual de instrucciones de Coleman MAX 2000002251

Resumen del contenido incluido en la página 1

INSTANT SHELTER MODEL 2000002251
®
4. Secure sides of shelter top to frame
Before you begin
with large, rectangular, hook & loop
Read all instructions before set up.
fasteners provided (2 on each side)
• Select a level site clear of rocks, branches, and other hard or
(Fig. 4). The shelter top has been
sharp objects, to install your shelter.
designed to have a tight fit over
WARNING: Keep clear of overhead power lines.
the frame. Fig. 4
• Do not set up your shelter under trees because of pot

Resumen del contenido incluido en la página 2

STITCH LINE Install the Screen House DISASSEMBLY INSTRUCTIONS NOTE: Raise frame posts to full height (top notch on post). Remove the Stakes 1. Unroll screen house and wrap around outside frame posts, 1. Carefully remove stakes that hold down the guylines and under the shelter post covers. Panels with zipper down screen house by pulling out hook ends. Remove excess soil middle should center in front and back openings. (Fig. 22) from stakes and put into storage bag. 2. Fasten corner hooks on