Resumen del contenido incluido en la página 1
Cat5 DVI-D Extender
User’s Guide
© 2007 Avenview ™ Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implie
Resumen del contenido incluido en la página 2
Table of Contents Getting Started ....................................................................................................................................... 3 Key Features ........................................................................................................................................... 3 System Devices and Functions ........................................................................................................... 4 DVI-C5-S Transmitter .......
Resumen del contenido incluido en la página 3
Getting Started The Cat5 DVI-D Extender system consists of a Transmitter and one or more Transceivers. The system can extend DVI-D signals over Cat5/5e/6 cable. By cascading Transceivers it is possible to extend the DVI-D signal to any length. By taking advantage of low-cost Cat5/5e/6 FTP cable, the Cat5 DVI-D Extender can simplify installation and save cost. With its unlimited cascading capacity you can extend your digital video displays almost anywhere. To simplify installation the Tr
Resumen del contenido incluido en la página 4
System Devices and Functions Transmitter DVI-C5-S a. Built-in EQ control to adjust the video quality b. Built-in one RJ45 DVI Output c. Built-in one RJ45 port for system output which can be connected by Cat 5 / 5e / 6 cable and send signal to System Receiver Transceiver DVI-C5-R d. Built-in EQ control to adjust the video quality e. Built-in one RJ45 DVI Output f. Built-in one RJ45 port for system output which can be connected by Cat 5 / 5e / 6 cable and send signal to System Receiv
Resumen del contenido incluido en la página 5
Panel Description DVI-C5-S Transmitter and DVI-C5-R Transceiver www.avenview.com 5
Resumen del contenido incluido en la página 6
Cable and Accessories DVI-HDMI Cable for Player Installation and Operation DVI-C5-S Transmitter Installation a. First Time Setup: Turn off the DVI output device (PC or DVD Player) and monitors. b. Device Connection: Connect local DVI monitor (M1) to the “DVI/MI OUT” of the Transmitter. Use the DVI-HDMI cable, plug the HDMI end to “INPUT” port of the Transmitter and the DVI-D end to PC or DVD Player’s DVD-D video port. Connect the power adapter to the “5VDC” and plug into t
Resumen del contenido incluido en la página 7
e. EQ Adjustment: You can adjust the EQ control to Auto mode by rotating the EQ control Anticlockwise. The “EQ” and “AUTO” LEDSs will display blue. After connecting the extender system, if you see dynamic dots on unclear image on the DVI, you need to adjust the signal from Transmitter. f. EDID Simulation: The Transmitter has built-in EDID simulator. When local DVI monitor is connected to Transmitter, it will automatically record the EDID data from DVI Monitor. When a local DVI moni
Resumen del contenido incluido en la página 8
Selection of Cable a. Selection: Most makes and versions of Cat 5/5e/6 cables will work with DVI-C5-S Transmitter and DVI-C5-R Transceivers. However, since the quality and characteristics of Cat 5/5e/6 cables varies it has been found that some perform better than others. The major factor influencing the transmitting distance is the skew property of the cables. Skew represents the difference in propagation delay between the fastest and slowest set of wire pairs. A lower skew will mean
Resumen del contenido incluido en la página 9
c. Termination: The RJ45 terminations to the Cat 5/5e/6 cable must be made to the EIA 568B specifications. 1. Orange White 2. Orange 3. Green White 4. Blue 5. Blue White 6. Green 7. Brown White 8. Brown The EIA/TIA definition of 568B in the pin assignment PAIR 3 PAIR 2 PAIR 1 PAIR 4 JACK POSITION www.avenview.com 9
Resumen del contenido incluido en la página 10
d. Connect the Cable: Plug one ends of UTP cable to DVI-C5-S Transmitter’s “LINK IN/OUT” port and the other end to the DVI-C5-R Transceiver’s “LINK IN/OUT” port. The monitor connected to the Transceiver should now display and the “LINK” LED should turn green to indicate the DVI signal activation. Use EQ control to adjust the video quality for best signal. Installation Diagram of DVI-C5-S and DVI-C5-R e. Extending Audio Signals: The DVI-C5-S Transmitter and DVI-C5-R Transceiver ar
Resumen del contenido incluido en la página 11
Installation of Multiple Transceivers and Display a. Multiple Transceivers: By using additional DVI-C5-R Transceivers, it is possible to extend the system almost indefinitely to remote DVI-D displays. Installation Diagram of Multiple Transceivers Ensure that common grounding is maintained to minimize ground loops and interference for larger group of cascaded Transceivers. www.avenview.com 11
Resumen del contenido incluido en la página 12
Specifications DVI Transmitter and Transceiver Model DVI-C5-S DVI-C5-R Description 1 Port DVI-D Transmitter 1 Port DVI-D Transceiver Input HDMI (DVI – HDMI Connector) RJ45 x 1 Output DVI Female x 1, RJ45 x 1 DVI Female x 1, RJ45 x 1 With each cascading length: Max Distance < 80m (275ft) @ 800 x 600 and Resolution < 50m (175ft) @ 1024 x 768 < 40m (150ft) @ 1280 x 1024 Video Control EQ x 1 Signal Type DVI-D Power DC 5V, 650mA Consumption Dimension 68 x 42 x19 (LxWxH) mm
Resumen del contenido incluido en la página 13
www.avenview.com 13
