Resumen del contenido incluido en la página 1
Fusion bagless cylinder vacuum cleaners
Please read and keep these instructions
getting the best from your
new cleaner...
If your cleaner is not picking up as well as it
should, please check
• Filters
It is important that the airbox and filters are cleaned regularly to
allow air through the appliance. Tap to remove dust, the filter can
also be washed in warm water and left to air dry.
IMPORTANT - Ensure filter is totally dry before refitting into
machine.
• Blockages
Check the hose, handle and
Resumen del contenido incluido en la página 2
• If the electrical cable becomes damaged Important safety the complete cable assembly must be replaced. Do not attempt this task instructions yourself, contact Morphy Richards using the replacement parts number on the The use of any electrical appliance front of this leaflet. requires the following common sense safety • The appliance must never be left running rules. when unsupervised. Primarily there is danger of injury or • This vacuum cleaner is intended for death and secondly the danger of
Resumen del contenido incluido en la página 3
„ Carrying handle Features ‰ Tube park (on underside of cleaner) Â Tube standby slot ⁄ Dust compartment cover ¤ Inlet for suction hose Accessories you should have ‹ Dust compartment release button Ê Suction hose with 360˚swivel connector › Tool storage compartment cover Á Handle with airflow control fi Air box Ë Floor nozzle fl Electronic suction power control È Combination telescopic metal tubes ‡ On/off foot switch Í Upholstery tool · Cable rewind foot switch Î Crevice tool ‚ Exhaust filter cove
Resumen del contenido incluido en la página 4
Assembly Push the elbow-shaped end of the suction hose into the housing until it clicks into place. Telescopic tube È Attach the tube to the handle. To adjust the length, press the release button as indicated and pull or push the tube to the È desired length. Floor nozzle Ë This nozzle is suitable for general purpose cleaning on a wide variety of floor coverings. Operation The cable should always be fully withdrawn before plugging into an electrical socket. Switching on Ensure that the electroni
Resumen del contenido incluido en la página 5
Controlling suction power The suction power can be varied to suit the surface being cleaned, by using the electronic suction power regulator. See table for guideline settings. Overheating protection Power setting Application In the event of a motor overload, your vacuum cleaner will switch off automatically. MIN MAX Curtains Press the on/off switch and let the motor cool and delicate down. fabrics The vacuum cleaner cuts out automatically when: Textiles and MIN MAX upholstery • The floor nozzl
Resumen del contenido incluido en la página 6
Accessories Press the button on top of the vacuum cleaner to open the accessories compartment. The accessories can be attached to the end of the tube or to the handle. • Upholstery tool Í for curtains and Í sofas/armchairs. • Crevice tool Î for small gaps - various Î surfaces. •Furniture brush Ï for dusting shelves etc, (pushes onto the crevice tool). Ï Tube standby During short breaks in cleaning the tubes can be held in an upright, ‘standby’ position, whilst you move furniture for instance. C
Resumen del contenido incluido en la página 7
Emptying the air box To maintain the performance of your vacuum cleaner the airbox must be emptied regularly and the filters cleaned. • Press the dust compartment release button ‹ indicated by arrow 1 and lift up the dust compartment lid. (arrow 2) • Holding the handle on the airbox lift upwards and remove the airbox from the machine. Take the airbox to the dustbin. • Unclip the airbox lid as shown (from the handle side first). Place the lid to one side and empty the contents of the airbox into
Resumen del contenido incluido en la página 8
Cleaning the airbox filter IT IS IMPORTANT TO CLEAN THE FILTER TO MAINTAIN PERFORMANCE, EVERY TIME THE AIRBOX IS EMPTIED. • After emptying the dust, twist the filter anti- clockwise to remove as shown. • Tap the filter over a dustbin to remove excess dust. Washing the airbox filter IT IS IMPORTANT TO REGULARLY WASH THE FILTER TO MAINTAIN PERFORMANCE. Wash in warm water and leave to air dry. Do not use detergents as this can affect the performance of the filter. CAUTION: THE FILTER MUST BE TOTALL
Resumen del contenido incluido en la página 9
Cleaning the motor protection filter The motor protection filter is accessible from the dust compartment only when the airbox has been removed first. WARNING: NEVER USE THE APPLIANCE WITHOUT THE MOTOR PROTECTION FILTER INSTALLED, OTHERWISE DAMAGE TO THE MOTOR MAY OCCUR WHICH WOULD NOT BE COVERED BY THE GUARANTEE. 1 Open the flap on the filter cassette. 2 Take out the micro hygiene filter. 3 Wash in warm water and leave to air dry. DO NOT USE DETERGENTS. 4 Replace the dry filter and close the fi
Resumen del contenido incluido en la página 10
Cleaning the exhaust air filter The exhaust air filter cleans the air before it exits the vacuum cleaner. Recommendation The exhaust air filter should be cleaned when you have emptied the airbox 5 times. How to clean the exhaust air filter 1 Push the lock and remove the cover in an upward direction. 2 Lift the exhaust air filter upwards and remove. 3 Wash in warm water and leave to air dry. DO NOT USE DETERGENTS. 4 Replace the dry filter and close the cover. Important Ensure the filter is compl
Resumen del contenido incluido en la página 11
Cleaning and maintenance Unplug from the mains before cleaning. The dust compartment and all accessories can be cleaned using a damp cloth or a non- abrasive domestic cleaner and wiped dry. To keep the underside of the floor nozzle clean, vacuum it at regular intervals using the crevice tool. Helpline If you have any difficulty with your appliance do not hesitate to call us. We are likely to be more help than the store from where it was bought. Please have the following information ready to ena
Resumen del contenido incluido en la página 12
guarantee on the new item will be Your three year parts & calculated from original purchase date. Therefore it is vital to retain your original till labour guarantee receipt or invoice to indicate the date of initial purchase. It is important to retain the retailers To qualify for the 3 year guarantee the receipt as proof of purchase. Staple your appliance must have been used according to receipt to this back cover for future reference. the manufacturers instructions. For example, Please quote t
