Resumen del contenido incluido en la página 1
RS-622
PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER
&
KEYLESS ENTRY SYSTEM
OPERATIONS MANUAL
Please register your product at
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
1
Resumen del contenido incluido en la página 2
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while the vehicle is running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking brake a
Resumen del contenido incluido en la página 3
CHANGING THE BATTERY IN YOUR TRANSMITTERS XT-33: This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016) that are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver. Locate the small notch on the lower right side of the transmitter case next to the key ring. Using the flat blade screwdriver, carefully pry the top case from the bottom case. It should snap apart after breaking the seal. Before r
Resumen del contenido incluido en la página 4
unlock and dome lights will turn on for 30 seconds. PATHWAY ILLUMINATION This feature turns the parking light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal. (Programmable) TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver door only when deactivating the system. Pushing the button a second time within 3 seconds will unlock the entire vehicle. (Optional) LED DISPLAY: LED Function Off Unlock Slow Flash Locked On
Resumen del contenido incluido en la página 5
Enter Valet Mode: 1. From the Unlock condition, turn the ignition to “ON” position. 2. Push and hold valet switch for 2 seconds until the LED turns on. The LED will remain on as long as the system is in ‘valet mode’. Exit Valet Mode: 1. Return to normal operation, turn ignition ‘on’. 2. Push and hold valet switch for 2 seconds, The LED will turn off indicating the system has exited the valet mode. PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED) The transmitter can be used as a
Resumen del contenido incluido en la página 6
REMOTE START OPERATION: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking brake and
Resumen del contenido incluido en la página 7
2. Move the optional remote start enable toggle switch to OFF position. (If installed) 3. Press the brake pedal, the vehicle will shut down and turn off the parking light to indicate engine stopped. TO OVERRIDE VEHICLE FROM REMOTE START CONTROL: To operate the vehicle while it is running from the remote start: 1. Insert the ignition key and turn it to “ON” (not the start) position. 2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the
Resumen del contenido incluido en la página 8
Exit the timer start: Timer start can be exited manually as follows: 1. Repeat the Enter Steps from above. Or 1. Make sure the remote start system is not operating the engine. 2. Turn the ignition on. The LED and parking light will flash (4) times. The siren chirps (4) times. SHUTDOWN INPUT FOR REMOTE STARTER: If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake peda
Resumen del contenido incluido en la página 9
Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen. When the old battery is AAA replace
Resumen del contenido incluido en la página 10
Remote Transmission In – Range Indicator You are within the remote You are transmitting the signal to control unit control range. Low Battery Trunk Release Trunk open. Trunk symbol only. You have to replace the battery of remote control. Vibration Mode Remote Control vibrates Ignition On when the system is triggered Power Save Mode Driver paging Someone is paging you in Save the battery power front of your vehicle. ** ** Press the valet switch in the vehicle
Resumen del contenido incluido en la página 11
For Regular Remote Control Transmitter: 1. Prior to pushing any button on the transmitter. Press the Select II button first on the standard transmitter. 2. Once II button is pressed the LED on the transmitter will illuminate for 3.5 seconds. While the LED is illuminated, press the button for the function you want to operate on the standard remote transmitter to control a second vehicle security system. For 2-way LCD Remote Control Transceiver: 2nd Car Operation: While the “II” icon d
Resumen del contenido incluido en la página 12
1. Press and hold all four remote control buttons simultaneously until one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to select the mode of vibration or melody, the icon will displayed on the LCD screen to show the LCD remote transceiver is in vibration mode. 3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited. Power Save Mode:
Resumen del contenido incluido en la página 13
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your Auto Page equipment is guaranteed for “life” to the original purchaser/user of the equipment and the original vehicle in which it was installed by an authorized installer under the following conditions: If the product proves defective (according to A
Resumen del contenido incluido en la página 14
replacement and labor of which shall be borne by the purchaser even if occurring during the WARRANTY period. 4. Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to the Auto Page Service center with “proof of purchase” at the purchaser’s expense prior to such return, a Return Authorization Number should be obtained. Auto Page will return the equipment, charges prepaid. Warranty Service can be provided through the dealer where the equipment is or
Resumen del contenido incluido en la página 15
Please go to the customer service tab and select product registration. It is the purchaser’s responsibility to register this product for any future warranty service. Warning: Some batteries may contain Perchlorate What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil. Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel f
Resumen del contenido incluido en la página 16
For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ 16
Resumen del contenido incluido en la página 17
960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com 17
