Resumen del contenido incluido en la página 1
KDC-MPV7026
KDC-MP6026
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2699-00/01 (MW)
Resumen del contenido incluido en la página 2
Contents Safety precautions 3 Menu system 20 Menu System Notes 5 Security Code Touch Sensor Tone Notes on playing MP3/WMA 6 Manual Clock Adjustment DSI (Disabled System Indicator) About CDs 8 Selectable Illumination Switching Display Type General features 9 Illumination Color Setting Power Contrast Adjustment Selecting the Source Dimmer Volume Switching preout System Q Dual Zone System Audio Control Dual Zone System Setting Speaker Setting CRSC (Clean Reception System Circuit) Switching Display
Resumen del contenido incluido en la página 3
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, take following precautions: the following precautions: • Insert the unit all the way in until it is fully locked • Make sure to ground the unit to a negative 12V in place. Otherwise it may fall out of place when DC power supply. jolted. • Do not open the top or bottom covers of the unit. • When extending the ignition, battery, or ground • Do not install the unit in a spot exposed to dire
Resumen del contenido incluido en la página 4
Safety precautions About CD players/disc changers NOTE connected to this unit • If you experience problems during installation, KENWOOD disc changers/ CD players released in consult your Kenwood dealer. 1998 or later can be connected to this unit. • If the unit fails to operate properly, press the Reset Refer to the catalog or consult your Kenwood button. The unit returns to factory settings when dealer for connectable models of disc changers/ the Reset button is pressed. If the unit stil
Resumen del contenido incluido en la página 5
Notes Cleaning the Unit The marking of products using lasers If the faceplate of this unit is stained, wipe it with a (Except for some areas) dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off CLASS 1 with a cloth moistened with neutral cleaner, then wipe neutral detergent off. LASER PRODUCT The label is attached to the chassis/case and says • Applying spray cleaner directly to the unit may affect its that the component uses laser beams that have
Resumen del contenido incluido en la página 6
Notes on playing MP3/WMA Note, however, that the MP3/WMA recording media and formats acceptable are limited. When • Play mode may not be possible when portions of the writing MP3/WMA, pay attention to the following functions of Windows Media Player 9 or higher are used. restrictions. Entering ID3 tag Acceptable media The Displayable ID3 tag is ID3 version 1.x. The MP3/WMA recording media acceptable to this For the character code, refer to the List of Codes. unit are CD-ROM, CD-R, and CD-RW
Resumen del contenido incluido en la página 7
MP3/WMA playing order When selected for play, Folder Search, File Search, When a File Search is executed with file ¡$ or for Folder Select, files and folders are accessed being played ... in the order in which they were written by the CD Operation of writer. (Current file: ¡$) the button Because of this, the order in which they are expected to be played may not match the order in 4 Button Beginning of file ¡$ ➜ ¡# which they are actually played. You may be able to ¢ Button ¡% ➜ ¡& set t
Resumen del contenido incluido en la página 8
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
Resumen del contenido incluido en la página 9
General features Q/ Release button SRC AUD 38 FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM FM AM/ VOL 4/¢ DISP/ NAME.S SW Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. • When the power is ON, the 'Security Code' (page 20) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Sour
Resumen del contenido incluido en la página 10
General features System Q Front/Rear High Pass "HPF" THRU/100/125/170 Hz Filter You can recall the best sound setting preset for Sub woofer Low Pass "LPF SW" 50/80/120/THRU Hz different types of music. Filter* Volume offset "V-offset" –8 — ±0 1 Select the source to set Loudness "LOUD" ON/OFF Press the [SRC] button. 2 Select the Sound type Press the [Q] button. • Volume offset: Each source’s volume can be set as a Each time the button is pressed the sound difference from the basic volume. set
Resumen del contenido incluido en la página 11
Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Station name or Frequency "SNPS" Frequency "BAND+FREQ" Clock In CD & External disc source Information Display Disc title "D-TITLE" Track title "T-TITLE" Track number & Play time "P-Time" Disc name "DNPS" Clock In MP3/WMA source Information Display Song title & Artist name "TITLE" Album name & Artist name "ALBUM"
Resumen del contenido incluido en la página 12
General features that time is registered, and Name Set mode closes. Station/Disc Naming (SNPS/DNPS) • Memory numbers Attaching a title to a Station or CD. - FM: 32 stations - AM: 16 stations 1 Receive/play the station/disc you want to - Internal CD player: 30 discs attach a title to - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • A title can ’t be attached to an MD. • The title of station/CD can be changed by the same
Resumen del contenido incluido en la página 13
output switches ON or OFF. When it’s ON, "Sub-W ON" is displayed. • You can control this function when 'Switching preout' (page 22) is set to "SWPRE Sub-W". Theft Deterrent Faceplate The faceplate of the unit can be detached and TEL Mute taken with you, helping to deter theft. The audio system automatically mutes when a call comes in. Removing the Faceplate 1 Press the Release button. When a call comes in Drop open the faceplate. "CALL" is displayed. The audio system pauses. 2 Drawing the f
Resumen del contenido incluido en la página 14
Tuner/TV control features SRC FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM 4/¢ 1 – 6 FM AM Reset button AUTO/ AME ST indicator Preset station number Band display Frequency display Tuning Mode 3 Tune up or down band Press the [4] or [¢] button. Choose the tuning mode. Press the [AUTO] button. • During reception of stereo stations the "ST" indicator Each time the button is pressed the Tuning is ON. mode switches as shown below. Tuning mode Display Operation Auto seek "Auto 1" Automatic searc
Resumen del contenido incluido en la página 15
Canceling Direct Access Tuning Frequency Step Setting Press the [DIRECT] button on the remote. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [1] and [5] button, press Station Preset Memory the Reset button. Putting the station in the memory. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. 1 Select the band Press the [FM] or [AM] button. • When the same operation is r epeated, it returns to the 2 Select the
Resumen del contenido incluido en la página 16
CD/MP3/WMA/External disc control features Release button SRC 38 FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM 4/¢ DISC+/ DISC–/ SCAN RDM/ REP F.SEL M.RDM DISP/ SCRL FM AM 3 Disc number IN indicator Pause and play Playing CD & MP3/WMA Press the [38] button. Each time the button is pressed it pauses and When there is no disc inserted plays. 1 Drop open the faceplate Press the Release button. Eject the disc 2 Insert a disc. 1 Drop open the faceplate Press the Release button. 3 Press the faceplate
Resumen del contenido incluido en la página 17
Track/File Search Searching for a song on the disc or in the MP3/ • The MP3/WMA media that this unit can play are CD- WMA folder. ROM, CD-R, and CD-RW. The medium formats must be ISO 9660 Level 1, Level Press the [4] or [¢] button. 2, Joliet, or Romeo. The methods and precautions to be followed for writing MP3/WMA data are covered in 'Notes on playing MP3/WMA' (page 6). Check that section before creating your MP3/WMA Function of disc changer/ MP3/ WMA media. Disc Search/Folder Search Selecti
Resumen del contenido incluido en la página 18
CD/MP3/WMA/External disc control features Function of disc changer Track/File/Disc/Folder Repeat Magazine Random Play Replaying the song, disc in the Disc changer or MP3/WMA folder you’re listening to. Play the songs on all the discs in the disc changer in random order. Press the [REP] button. Each time the button is pressed the Repeat Play Press the [M.RDM] button. switches as shown below. Each time the button is pressed the Magazine Random Play turns ON or OFF. In CD & External disc source
Resumen del contenido incluido en la página 19
• The methods for moving to other folders in the folder select mode are different from those in the folder search mode. See 'Notes on playing MP3/WMA' (page 6) for details. Canceling the Folder Select mode Press the [F.SEL] button. Text/Title Scroll Scrolling the displayed CD text, MP3/WMA text, or MD title. Press the [SCRL] button for at least 1 second. Function of disc changers with remote DNPP (Disc Name Preset Play) Selecting the CD displayed in the DNPS of the CDs set in the Disc change
Resumen del contenido incluido en la página 20
Menu system MENU FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM 1 – 6 FM AM 4/¢ Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed afterwards their setting content chart is entered. (Normally the and their setting content is after this operation
