Manual de instrucciones de Kenwood DDX6036M

Resumen del contenido incluido en la página 1

MONITOR WITH DVD RECEIVER
DDX6036
DDX6036M
INSTALLATION MANUAL
© B54-4756-00 (MW/M2W)

Resumen del contenido incluido en la página 2

Accessories 1 9 ..........1 ..........1 2 ..........1 3 ..........1 4 ..........2 5 ..........1 6 ..........1 7 ..........6 8 ..........6 | 2 DDX6036/DDX6036M

Resumen del contenido incluido en la página 3

Installation Procedure 1. To prevent a short circuit, remove the key from the ¤ ignition and disconnect the - battery. • Mounting and wiring this product requires skills and 2. Make the proper input and output wire experience. For safety’s sake, leave the mounting and wiring connections for each unit. work to professionals. 3. Connect the speaker wires of the wiring harness. • Make sure to ground the unit to a negative 12V DC power 4. Connect the wiring harness wires in the following supply

Resumen del contenido incluido en la página 4

Connection If you connect the ignition wire (red) and the battery ¤ wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) FM/AM Antenna Cord Ground wire (Black) - antenna input (To car chassis) C C Battery Connect to the vehicle's parking brake ⁄ dete

Resumen del contenido incluido en la página 5

Cooling fan FUSE ( 15A ) Accessory 1 REVERSE STEERING WHEEL REMOTE CONT REMOTE INPUT White/Black To front left speaker + White Gray/Black ILLUMI To front right speaker + Gray Green/Black MUTE To rear left speaker + Green Purple/Black To rear right speaker + ANT. CONT Purple P.CONT | English 5

Resumen del contenido incluido en la página 6

System Connection USB terminal USB device (commercially available) Audio input (iPod/AV Input 2 switchable) Resistance-free stereo type mini plug (3.5φ) Visual input (iPod/AV Input 2 switchable) Resistance-free mini plug (3.5φ) Accessory Accessory 3 2 Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) Audio/Visual input • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) Rear View Camera Input • Visual input (Yellow) Fro

Resumen del contenido incluido en la página 7

Optional Accessory Connection iPod (commercially available) KCA-iP301V (Optional Accessory) Visual Output (Yellow) Audio Output (Black) USB terminal USB terminal KCA-BT200 Connection cable (Optional Accessory) (Included in the KCA-BT200) Navigation System (Optional Accessory) 123 Type Switch 123 TV Tuner (Optional Accessory) Connection cable (Included in the Navigation System) Navigation units that can be connected to this unit. ⁄ (As of December, 2009): KNA-G630 KNA-G630CN Connectio

Resumen del contenido incluido en la página 8

Installing the Escutcheon For General Motors For Toyota/Scion 1. Cut out accessory 5 to meet the shape of the 1. Cut out accessory 5 as illustrated. opening of the center console. Cutting line 2. Attach accessory 5 to the unit. Cut out to meet the shape of the opening in the vehicle. Accessory 5 Accessory 5 2. Fold double-sided adhesive (accessory 6) along the slit and attach it to accessory 5 cut-out against the center rib as illustrated. Use 2 pieces of accessory 6 for 1 accessory 5 cut-ou

Resumen del contenido incluido en la página 9

Installation for Monitor/Player Unit Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Make sure that the unit is installed securely in place. If the unit is unstable, ⁄ it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 7 (M5x6mm) or Accessory 8 (M5x7mm) Car Bracket Accessory 7 (M5x6mm) or Accessory 8 (M5x7mm) | English 9

Resumen del contenido incluido en la página 10

Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Insert the two removal tools 4 deeply into the Lower the frame and pull it forward as shown in slots on each side, as shown. the figure. Accessory 4 Accessory 4 Catch Lock 3. Lower the remov

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12