Manual de instrucciones de Hitachi RAS-35YH6

Resumen del contenido incluido en la página 1

199mm
280mm
THE CHOICE OF MOUNTING SITE (Please note the following matters and obtain permission from customer before installation.)
FOR SERVICE PERSONNEL ONLY
WARNING WARNING
• The unit should be mounted at stable, non-vibratory location • The Outdoor unit must be mounted at a location which can
which can provide full support to the unit. support heavy weight. Otherwise, noise and vibration will
increase.
CAUTION
CAUTION
• No nearby heat source and no obstruction near the air
• Do not expose

Resumen del contenido incluido en la página 2

• Please mount the Outdoor unit of stable ground to prevent vibration and increase 1 Preparation of Pipe 3 Remove of Air From The Pipe And Gas Leakage Inspection of noise level. • Use a pipe cutter to cut the copper pipe and remove burr. • Decide the location for piping after sorting out the different types of pipe available. Procedures of using Vacuum Pump for Air Removal • When removing side cover, please pull the handle after undoing the hook by pulling Trimming tool When the meter reaches -