Resumen del contenido incluido en la página 1
C OOKTOP V ENTILATION H OODS
INSTALLATION INSTRUCTIONS
Resumen del contenido incluido en la página 2
As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equip- ment. There are two types of potential hazards that may occur during installation. signals a situation where minor injury or product damage may occur if you do not follow instructions. states a hazard that may cause serious injury or death if precautions are not followed. Another footnote we would like to identify is IMPORTANT
Resumen del contenido incluido en la página 3
WOLF COOKTOP VENTILATION HOODS INSTALLATION REQUIREMENTS BEFORE YOU START IMPORTANT NOTE: This installation must be IMPORTANT NOTE: Wolf cooktop wall and completed by a qualified installer or Wolf island hood are recommended for use with authorized service center technician. Wolf electric and gas cooktops and integrated modules. They are NOT recommended for use Installer: Please read the entire Installation with Wolf dual fuel ranges, gas ranges and Instructions prior to installation. Save these
Resumen del contenido incluido en la página 4
WOLF COOKTOP VENTILATION HOODS OVERALL DIMENSIONS MODEL CTWH30 18" 12" (457) (305) Overall Width 30" (762) 1 4 /2"min 7 (114) Overall Height (excluding chimney) 6 /8" (175) 1 Overall Height (including chimney) 30 /2" (775) 1 1 1 30 /2" TO 48 /2" 19 /8" 1 Max Height (full extension) 48 /2" (1232) (775 - 1232) (486) OVERALL HEIGHT Overall Depth 21" (533) 7 Shipping Weight (shell only) 85 lbs (39 kg) 6 /8" (175) + 1 Dimensions may vary to /8" (3). – 9 30" (762) 21" (533) 1 /16" (40) OVERALL WIDTH O
Resumen del contenido incluido en la página 5
INSTALLATION INSTRUCTIONS HOOD PLACEMENT Wolf cooktop wall and island hoods come with CALCULATE CHIMNEY FLUE HEIGHT a telescopic chimney flue that allows you to 1) First measure A (total kitchen height from reach a ceiling height of 8' (2.4 m) to 9' (2.7 m) finished floor to finished ceiling height). with a finished look. A flue extension to accommodate 10' (3 m) ceilings is available. 2) Next measure B (height from finished floor ACCESSORIES Refer to page 12 for optional accessories. to counter
Resumen del contenido incluido en la página 6
WOLF COOKTOP VENTILATION HOODS WALL HOOD INSTALLATION INSTALL DUCTWORK DUCTWORK INSTALLATION To reduce the risk of fire, use only metal THROUGH ROOF ductwork. ROOF CAP OR REMOTE BLOWER – TRANSITION FROM 8" (203) TO 10" (254) DUCT REQUIRED FOR REMOTE BLOWER 8" (203) ROUND DUCT IMPORTANT NOTE: Consult a qualified HVAC Engineer for specific ducting applications. WALL CAP CHIMNEY FLUE EXTENSION OR REMOTE BLOWER Decide where the ductwork will run between TELESCOPIC CHIMNEY FLUE the hood and the outs
Resumen del contenido incluido en la página 7
INSTALLATION INSTRUCTIONS WALL HOOD INSTALLATION ELECTRICAL REQUIREMENTS INSTALL MOUNTING BRACKETS Wolf cooktop wall hoods require a separate, Construct wood wall framing that is flush with grounded 110/120 V AC, 60 Hz power supply. the interior surface of the wall studs. Make The service should have its own 15 amp circuit sure that the framing is centered in the hood breaker. Locate the electrical supply with a installation location, and that the height of the ACCESSORIES minimum of 12" (305) o
Resumen del contenido incluido en la página 8
WOLF COOKTOP VENTILATION HOODS WALL HOOD INSTALLATION ELECTRICAL CONNECTIONS CONNECT DUCTWORK IMPORTANT NOTE: This ventilation hood Use the screws and wall anchors provided to must be properly grounded. This unit should secure the upper brackets to the ceiling. be installed by a qualified electrician in accord- Position the upper brackets based on the ance with all applicable national and local dimension of the telescopic chimney flue. IMPORTANT electrical codes. NOTE Use an 8" (203) round metal
Resumen del contenido incluido en la página 9
INSTALLATION INSTRUCTIONS ISLAND HOOD INSTALLATION INSTALL DUCTWORK DUCTWORK INSTALLATION To reduce the risk of fire, use only metal THROUGH ROOF ductwork. ROOF CAP OR REMOTE BLOWER – TRANSITION FROM 8" (203) TO 10" (254) DUCT REQUIRED FOR REMOTE BLOWER 8" (203) ROUND DUCT IMPORTANT NOTE: Consult a qualified HVAC Engineer for specific ducting applications. 8" (203) ROUND ELBOW 8" (203) ROUND Decide where the ductwork will run between ELBOW DUCTWORK CHIMNEY FLUE EXTENSION INSTALLATION the hood a
Resumen del contenido incluido en la página 10
WOLF COOKTOP VENTILATION HOODS ISLAND HOOD INSTALLATION ELECTRICAL REQUIREMENTS Secure the upper half of the support frame to the joists and cross framing with four screws The Wolf cooktop island hood requires a provided with your hood. Make sure that the separate, grounded 110/120 V AC, 60 Hz power screws are driven into the center of the joists supply. The service should have its own 15 and framing for maximum strength. Ensure the amp circuit breaker. Locate the electrical correct orientation
Resumen del contenido incluido en la página 11
INSTALLATION INSTRUCTIONS ISLAND HOOD INSTALLATION MOUNT HOOD TO SUPPORT FRAME Reinstall the electrical box cover and screws. Make sure that all wires are secure and that no Mount the hood to the support frame by wires are pinched between the cover and box. aligning the four weld screws on the hood to Refer to page 13 for internal blower installation the four holes on the support frame. Use four guidelines and remote blower wiring. nuts to secure the hood to the support frame. IMPORTANT Refer to
Resumen del contenido incluido en la página 12
WOLF COOKTOP VENTILATION HOODS BLOWER ASSEMBLIES VENTILATION HOOD ACCESSORIES Wolf cooktop wall and island hoods are Optional accessories for the Wolf cooktop wall shipped without the blower assembly. Wolf and island hoods are available through your internal or remote blower assemblies are Wolf dealer. To obtain local dealer information, available as sales accessories through your visit the Locator section of our website, Wolf dealer. wolfappliance.com. ACCESSORIES IMPORTANT NOTE: Blower option
Resumen del contenido incluido en la página 13
INSTALLATION INSTRUCTIONS INTERNAL BLOWERS REMOTE BLOWERS INTERNAL BLOWER INSTALLATION REMOTE BLOWER INSTALLATION IMPORTANT NOTE: For mounting and IMPORTANT NOTE: For mounting and installation of the internal blower, refer to the installation of the remote blower, refer to the specific installation instructions provided with specific installation instructions provided with each blower. each blower. 1) Remove the hood filters. Locate the remote blower so that the length of the duct run and number
Resumen del contenido incluido en la página 14
WOLF COOKTOP VENTILATION HOODS REMOTE BLOWERS REMOTE BLOWER WIRING IMPORTANT NOTE: Before turning the power on to the ventilation hood, make sure the 1) Remove the cover from the front of the blower is in the OFF position. electrical box. Remove the electrical box knockout that faces the hood's discharge collar. 2) Disconnect the red and black or white wires using a flat-blade screwdriver. Refer to illustration A below. 3) Insert 6" (152) of the remote blower wiring through the knockout opening
Resumen del contenido incluido en la página 15
INSTALLATION INSTRUCTIONS TROUBLESHOOTING IF YOU NEED SERVICE IMPORTANT NOTE: If the cooktop ventilation Maintain the quality built into your cooktop hood does not operate properly, follow these ventilation hood by calling a Wolf author- troubleshooting steps: ized service center. Verify that power is being supplied to the For the name and number of the Wolf ventilation hood. authorized service center nearest you, CONTACT check the Locator section of our website, Check electrical connections to
Resumen del contenido incluido en la página 16
WOLF APPLIANCE COMPANY, LLC P. O. BOX 44848 MADISON, WI 53744 800-332-9513 WOLFAPPLIANCE.COM 807574 9/2005
