Manual de instrucciones de Oregon Scientific weather station with fm pll radio BARM688

Resumen del contenido incluido en la página 1

Temperature .............................................................7
Weather Station
Radio .........................................................................7
with FM PLL Radio
Sleep Timer ..............................................................7
Model: BARM688
Backlight ..................................................................8
USER MANUAL
Reset .........................................................................8
Precautions ....................................

Resumen del contenido incluido en la página 2

4. (STATION): Toggle between 8 preset radio INTRODUCTION channels; save a channel TM Thank you for selecting the Oregon Scientific 5. MODE: Change setting / display Weather Station with FM PLL Radio. Please keep this 6. TUNE / : Increase / decrease setting; activate manual for instructions and information you should / deactivate clock reception signal; change radio know about. frequency 7. ALARM: View alarm status; set alarm OVERVIEW BACK VIEW FRONT VIEW 1 1 5 2 2 5 3 6 3 4 6 7 4 7

Resumen del contenido incluido en la página 3

LCD REMOTE SENSOR 2 1 3 1 4 3 5 4 2 1. LED transmission indicator 1. Weather forecast area 2. Wall mount 2. Radio area 3. Battery compartment 3. Temperature area 4. RESET switch 4. Clock / alarm area 5. CHANNEL switch 3 BARM688_M_EN.indd 3 3/5/07 3:37:27 PM E N

Resumen del contenido incluido en la página 4

GETTING STARTED BATTERIES Insert the batteries, matching the polarities (+/-) as ADAPTER shown. Plug adapter into main unit. Make sure the adapter socket is easily accessible to the unit. shows when the battery is low. shows when the adapter is not connected. UNIT LOCATION Main Weather forecast area NOTE This product may malfunction when radio interference appears on the AC power line. The unit will Remote Temperature area revert to normal operation when interference stops. REMOTE S

Resumen del contenido incluido en la página 5

5. Place the sensor within 30 m (98 ft) of the main unit ICON DESCRIPTION using the table stand or wall mount. Main unit is searching for the sensor(s) Sensor 1 data received The sensor cannot be and “- -” found NOTE If the sensor is not found, check the batteries, The transmission range may vary depending on many obstructions, and remote unit location. factors. You may need to experiment with various locations to get the best results. For best results: • Place the sensor ou

Resumen del contenido incluido en la página 6

3. Press MODE to confirm. CLOCK 4. The setting sequence is: time zone offset, 12 / 24 hour format, hour, minute, year, day / month format, CLOCK RECEPTION month, day, and display language. This product is designed to synchronize its clock automatically with a clock signal. TIPS Time zone offset sets the clock +/- 23 hours from the received clock signal time. The language To select clock signal: options are (E) English, (F) French, (D) German, (I) Slide EU / UK to select the signal rece

Resumen del contenido incluido en la página 7

To silence the alarm: To end, press CH or MEM. • Press SNOOZE to silence it for 8 minutes. OR To toggle between current, minimum and maximum • Press any key except SNOOZE to turn the alarm off records for the selected sensor: and activate it again after 24 hours. Press MEM repeatedly. To clear the records: WEATHER FORECAST Select the channel to clear the memory, then press This product forecasts the weather for the next 12 to and hold MEM for 2 seconds. The indoor memory 24 hours within a 1

Resumen del contenido incluido en la página 8

2. Press SLEEP to set radio sleep timer duration (120, • Only use fresh batteries. Do not mix new and old 90, 60, 30, 15 or 0 minutes). Select “0” to disable batteries. the sleep timer. • Images shown in this manual may differ from the actual display. 3. Press VOL / to change the volume. • When disposing of this product, ensure it is collected Z NOTE “Z ” flashes when the sleep timer is activated. separately for special treatment. • Placement of this product on certain types of wood may

Resumen del contenido incluido en la página 9

SPECIFICATIONS ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn TYPE DESCRIPTION more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care Main unit department directly, please visit: Dimensions 145 x 134.5 x 55 mm http://www2.oregonscientific.com/service/default.asp (L x W x D) (5.7 x 5.3 x 2.2 in) OR Call 1-800-853-8883. Weight 300g (10.6 ounces) without battery For international inquiries, please visit: Indoor ran